• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1110-1111
• /
• 2008

The life time of PV module is semi-permanent. But, because of installation and module fabrication process, its important part can not be finished. In this paper, we analyze 15 years old modules made from different company. Among the PV modules, the maximum power drop ratio was 12.23% minimum and 80.63% maximum. Also the effect of solar cell's short circuit current difference was analyzed. The PV module exposed about 65days, its the maximum power drop ratio was 1.29% minimum and 23.43% maximum. It is for reduction of current value. And the reason for current reduction was due to reduction of parallel resistance of solar cell. To prevent early degradation, it is need to have attention to fabrication, installation and maintenance.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.23-29
• /
• 2017

In this study engineered steel fibres used as reinforcement for concrete were characterized by number of key mechanical and spatial parameters, which are easy to measure and quantify. Such commonly used parameters as length, diameter, fibre intrinsic efficiency ratio (FIER), hook geometry, tensile strength and ductility were considered. Effective classification of various fibres was demonstrated using simple multivariate computations involving principal component analysis (PCA). Contrary to univariate data mining approach, the proposed analysis can be efficiently adapted for fast, robust and direct classification of engineered steel fibres. The results have revealed that in case of particular spatial/geometrical conditions of steel fibres investigated the FIER parameter can be efficiently replaced by a simple aspect ratio. There is also a need of finding new parameters describing properties of steel fibre more precisely.

• The Journal of the Korean life insurance medical association
• /
• v.29 no.2
• /
• pp.18-21
• /
• 2010

Background: The kidney transplantation is increasing. The kidney donation of a living donor is more common in Korea than in other countries. Underwriters may encounter a case of a kidney donor. So we need to determine medical risk for a living kidney donor. Methods: Comparative mortality figures were calculated from a source article using mortality analysis methods. Results: Mortality Ratio of a living kidney donor was estimated to 106%, and Excess Death Rate was 0.89 per 1000. Discussion: A healthy kidney donor is quite within standard, even better in terms of medical risk.

• Journal of Korean Academy of Nursing
• /
• v.43 no.2
• /
• pp.154-164
• /
• 2013

Purpose: The purpose of this article is twofold: 1) introducing logistic regression (LR), a multivariable method for modeling the relationship between multiple independent variables and a categorical dependent variable, and 2) examining use and reporting of LR in the nursing literature. Methods: Text books on LR and research articles employing LR as main statistical analysis were reviewed. Twenty-three articles published between 2010 and 2011 in the Journal of Korean Academy of Nursing were analyzed for proper use and reporting of LR models. Results: Logistic regression from basic concepts such as odds, odds ratio, logit transformation and logistic curve, assumption, fitting, reporting and interpreting to cautions were presented. Substantial shortcomings were found in both use of LR and reporting of results. For many studies, sample size was not sufficiently large to call into question the accuracy of the regression model. Additionally, only one study reported validation analysis. Conclusion: Nursing researchers need to pay greater attention to guidelines concerning the use and reporting of LR models.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.16-21
• /
• 2002

The high speed machining center(HMC) has been widely applied to manufacture a die and trial product in many machine industry. Because the evaluation fer the HMC is not sufficiently performed and the efficient cutting conditions aren't selected, a great loss has been caused in the cost aspect. In this study, the need of preliminary running time and unstable spindle speed is presented from the analysis of acceleration in idling. The Machinability fur the TiAlN coated flat end mill and STD11( $H_{R}$C60) is evaluated from the trends of tool wear and cutting force according to cutting conditions and slenderness ratio and a low response of tool dynamometer in high speed is proved. The resonance spindle speed is identified through the tool wear and natural frequency test.t.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1009-1019
• /
• 2009

Soil nailing method is widely used in reinforcing slopes and excavating earth. The analysis of nail-reinforced slopes, in order to determine the economical length ratio and nail angle, complicated analytical need to be applied by means of computer programs. Therefor this suggested Soil stability Chart for nailed slopes which may be very useful for pre-design, rapidly design, and final check. Three slope types, three nail length and three nail angles are selected for the stability analysis by using limit equilibrium method of Bishop and French Method. From the above results, this study propose the slope reinforced design charts for dry season and rainy season. This proposed reinforced design charts can check dry season as well as rainy season, also these charts can provide reinforcing requirement, soil nail's economical length ratio and nail angle as well.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.175-182
• /
• 2001

Effective length factor approach for framed column design has long played an important design-aid role. This approach, however, is effective only when the columns are in the form of prismatic or uniform cross sections. Structural engineers who have to design or analyse framed columns with variable cross sections need some means to do their job. By using the finite element method, the stability analysis of the isolated compression members with variable cross sections and that of the framed columns are performed. The parameters considered in the stability analysis are taper and sectional property parameters of the columns, the second moment of inertia ratio of beam to column, and beam span to column height ratio. On the basis of the stability analysis results, effective length factor formulas for the columns with variable sections are derived.

• Animal cells and systems
• /
• v.16 no.2
• /
• pp.135-144
• /
• 2012

$Dendronephthya$ $castanea$ Utinomi, 1952 is a member of the family Nephtheidae, and dominates shallow waters adjacent to the southern part of Jejudo Island, Korea. This species is a gonochoric internal brooder with a sex ratio of 1:1, and releases planulae around the time of the full and new moon from July to September, when the seawater temperature peaks. The gametogenic cycle is annual, and oogenesis (12 months) is longer than spermatogenesis (4-5 months). No difference in reproductive features including sexuality, sex ratio, gametogenesis and gametogenic cycles was found between the sympatric species $D.$ $castanea$ and $D.$ $gigantea$, and there was no temporal reproductive isolation. Investigation of the morphological taxonomy and molecular biology of these species indicates that they have very similar or identical traits, suggesting an absence of speciation and a need for taxonomic reclassification.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.110-114
• /
• 2016

Magnetic couplings are widely used in various industrial applications because they can transmit magnetic force without any mechanical contact. In addition, linear couplings have many advantages. For example, they do not need to convert rotary motion to linear motion. This paper shows an analytical analysis of tubular type linear magnetic couplings (TLMCs) with a Halbach array magnetized permanent magnet (PM). An analytical method for magnetic fields owing to PMs is performed by using magnetic vector potential as well as Poisson and Laplace equations. Then, the magnetic force is calculated by using the Maxwell stress tensor. The analytical analysis results were compared with finite element method (FEM) results. In addition, we predicted the magnetic force characteristic according to design parameters such as the iron core thickness, inner PM thickness to -outer PM thickness ratio, PM segment ratio of the axial magnetized PM segment and radial magnetized PM segment, and various pole numbers.

• The Journal of Fisheries Business Administration
• /
• v.7 no.1
• /
• pp.27-41
• /
• 1976

The results analyzed of the actual state of the stow net fisheries based on the cost expended in 1975 areas follows; The total cost of this fisheries will be 1, 672, 238 won; the production cost, 1, 588, 060 won (95%) ; the material cost in proportion to total cost (100%)408, 480won (24.4%);the labour cost, 1, 006, 480 won (60.2%) ; the expenses, 173, 100won(10.4%)and the commission and the interest payment, 84, 178won(5%). As above the commission and the interest payment doesn't need to be paid much, but only production cost should be paid in case of small scale inshore fisheries. The cost per unit of caches (per Kg) becomes 12 won, the ratio cost of sales (83.4%), the ratio of profit, 16.%. According to the adove, in case of the powered vessel; it shows a tendency of spending too much expenses owing to excessive payment of oil. And in case of nonpowered vessels, it shows a tendency of spending less expenses but still get much gains, due to the fact that the commission and the interest payment are less, and none is paid for fuel procurement.