• 제목/요약/키워드: Neck Length Rate

검색결과 43건 처리시간 0.029초

필렛효과에 따른 미세혈관 문합커플러(AnaFix®) 마이크로핀의 응력분포 (Stress Distribution in Microvascular Anastomotic Coupler (AnaFix®) Micropins with Respect to the Fillet Radius)

  • 지대원;김철웅
    • 대한기계학회논문집B
    • /
    • 제35권11호
    • /
    • pp.1139-1145
    • /
    • 2011
  • 기존 봉합사를 이용한 미세혈관수술의 단점을 개선한 기계식 미세혈관 문합시스템은 크게 문합링-핀 시스템 및 디바이스로 구분된다. 유한요소해석을 이용한 본 연구에서 문합링파트는 생체적합성과 사출성형 가공성이 우수한 High Density Polyethylene(HDPE)가 적용되었고, 마이크로핀은 SUS316, Ti-6Al-4Nb, Ti-6Al-4V, unalloyed titanium 이상 4가지 재료가 적용되었다. 미세혈관 문합링 마이크로핀의 fillet radius, neck length가 von Mises stress 변화에 미치는 영향을 평가하기 위해 Short Neck(SN)과 Long Neck(LN)으로 구분하고, 필렛이 존재하지 않는 경우(SN-1, LN-1)와 존재하는 경우(SN-2, SN-3, LN-2, LN-3)로 구분하였다. 필렛 유무와 형상에 대한 von Mises stress의 변화비인 Fillet Radius Rate(FRR)와 동일 필렛형상 내에서 neck 길이변화에 따른 von Mises stress의 변화비인 Neck Length Rate(NLR)의 결과를 종합해본 결과 SN-3의 마이크로핀 neck 형상이 가장 안전한 설계 형상임을 파악할 수 있었다.

Neck Formation in Drawing Processes of Fibers

  • Chung, Kwansoo;Yoon, Hyungsop;Youn, Jae Ryoun
    • Fibers and Polymers
    • /
    • 제2권1호
    • /
    • pp.140-143
    • /
    • 2001
  • To better understand the formation of necking in drawing processes of fibers, strain distributions during drawing processes have been analyzed. For simplicity, one-dimensional incompressible steady flow at a constant temperature was assumed and quasi-static model was used. To describe mechanical properties of solid polymers, non-linear visco-plastic material properties were assumed using the power law type hardening and rate-sensitive equation. The effects of various parameters on the neck formation were matematically analyzed. As material property parameters, strain-hardening parameter, visco-elastic coefficient and strain-rate sensitivity were considered and, for process parameters, the drawing ratio and the process length were considered. It was found that rate-insensitive materials do not reach a steady flow state and the rate-sensitivity plays a key role to have a steady flow. Also, the neck formation is mainly affected by material properties, especially for the quasi-static model. If the process length changes, the strain distribution was found to be proportionally re-distributed along the process line by the factor of the total length change.

  • PDF

벤츄리 노즐 출구 형상과 작동 조건에 따른 캐비테이션 기포 발생 특성 연구 (Generation of emulsions due to the impact of surfactant-laden droplet on a viscous oil layer on water)

  • 오창훈;김준현;성재용
    • 한국가시화정보학회지
    • /
    • 제21권1호
    • /
    • pp.94-102
    • /
    • 2023
  • Three design parameters were considered in this study: outlet nozzle angle (30°, 60°, 80°), neck length (1 mm, 3 mm), and flow rate (0.5, 0.6, 0.7, 0.8 lpm). A neck diameter of 0.5 mm induced cavitation flow at a venture nozzle. A secondary transparent chamber was connected after ejection to increase bubble duration and shape visibility. The bubble size was estimated using a Gaussian kernel function to identify bubbles in the acquired images. Data on bubble size were used to obtain Sauter's mean diameter and probability density function to obtain specific bubble state conditions. The degree of bubble generation according to the bubble size was compared for each design variable. The bubble diameter increased as the flow rate increased. The frequency of bubble generation was highest around 20 ㎛. With the same neck length, the smaller the CV number, the larger the average bubble diameter. It is possible to increase the generation frequency of smaller bubbles by the cavitation method by changing the magnification angle and length of the neck. However, if the flow rate is too large, the average bubble diameter tends to increase, so an appropriate flow rate should be selected.

성인 여성의 연령대별 인체 부위 간 치수증감률을 반영한 재킷 그레이딩에 관한 연구 (A Study on Split Grading Methods for Women's Jackets and Increase Rate of Body Size of Women aged 30-50s)

  • 백리세;송화경
    • 한국의류산업학회지
    • /
    • 제21권6호
    • /
    • pp.821-829
    • /
    • 2019
  • This study investigated the location of grading lines and grading amount for a jacket item by the target age groups (20-30, 30-40, and 40-50) for 17 women's wear brands. This study then utilized 7th SizeKorea data to analyze the increase rate of body size and to suggest the grading deviation distribution ratio of the jackets using regression analysis. The increase in neck girth of the jackets targeting aged 30-40s did not reflect the human body change rate. The shoulder length increased by 4.6%-8.1% with the bust girth increase; however, the brands produced longer shoulder length reflecting 20-35% of the bust girth increase. The armhole girth was 54.9% - 59.7% of bust circumstance increase rate. However, the 20-30 target age group brands distributed 80% of bust girth to armhole girth and the 30-40 and the 40-50 target age group brands distributed 50% of the bust girth to armhole. In particular, the 20-30 target age group brands were found to produce a large margin around the armhole. When it came to length items, the brands targeting 20-30s and the 40-50s reflected deviation distribution rate of length from underarm to waist and length from waist to hip in comparison with the overall jacket length deviation. The 30-40 target age group brands, 8 out of 20 brands distributed the jacket length deviation in the length from the back of neck to the underarm; consequently, only 22% percent should be distributed in this part.

이젝터의 노즐 형상이 흡입유량에 미치는 영향 (Effect of Nozzle Geometry on the Suction Flow Rate in a Ejector)

  • 김유준;박정우;서이수
    • 한국유체기계학회 논문집
    • /
    • 제12권6호
    • /
    • pp.13-17
    • /
    • 2009
  • Ejector is an equipment devised for making use of the low pressure occurring from the fast fluid injection and it is a transportation equipment which can obtain vacuum using the kinetic energy of the fluid. This ejector system is, nowadays, widely used for construction machinery, heavy equipments, the cooling and ventilation of electronic devices and for the various fluid transportation and pumps. In this study, it is attempted to perform a numerical analysis and an experiment to find out the characteristics of fluid quantity, velocity and the pressure distribution of the induction pipe by changing the length and the radius ratio of the nozzle of ejector. From the results, it is investigated that the distributions of velocity and pressure of induction pipe attached are changing with the length and the radius ratio of the nozzle. In addition, it is shown that for the small and large ejector, the efficiency is the maximum when the length of the nozzle arrived to the neck of the ejector, however, if it is installed at below or above the neck the efficiency is rather decreased.

미세수술을 이용한 재건수술에서 정맥이식의 유용성 (Usefulness of Vein Grafts in Reconstructive Microsurgery)

  • 안희창;안덕균
    • Archives of Reconstructive Microsurgery
    • /
    • 제5권1호
    • /
    • pp.46-55
    • /
    • 1996
  • The purpose of this study is to investigate if there is a higher rate of free flap failure in cases of vein grafts compared to non-vein graft, and to analyze the clinical usefulness and necessity in elective free flap surgery. We have used 24 vein grafts in 208 free flaps from May, 1986 until August, 1995. Vein grafts were from 2cm to 50cm in length between the recipient and donor vessels. Reconstructed sites were 10 lower extremities, 8 head and neck, 4 hand, and 2 trunk. Vein grafts were used 14 for arterial, 6 venous, 4 in both arterial and venous anastomoses. We intentionally used long vein grafts longer than 5cm for improved blood flow in cases of peripheral vascular disease, radionecrotic wounds, lower leg trauma. Short vein grafts of about 3cm in length were used to overcome the shortage of vascular length in cases of unexpected vessel anomaly, short donor vessel, and difficult access to recipient vessels after radical neck dissection. All veins were carefully handled with ligation of very small branches and were transferred to the recipient site without irrigation. 8 flaps were failed out of a total of 208 free flaps, however there was no failure among the 24 cases that needed vein grafts between the donor and recipient vessels. Success rates between non-vein grafts free flaps and vein graft free flaps were 95.6%(8/184) and 100%(0/24). Even though the vein grafts increase the operation time and the number of anastomoses, they do not result in any increased failure rate of free flap surgery(4.4% versus 0%). In addition to the reducing tension between recipient and donor vessels, the surgeon can select better recipient vessels with excellent blood flow so that vein grfats in microsurgery can provide a high success rate of free flaps.

  • PDF

학령전기 여아의 상지동작에 따른 상반신 체표길이 변화 연구 (A Study on the Length Variation of the Upper Body Surface according to Arm-movements for Early Elementary Schoolgirls)

  • 배은아;장정아;권영숙
    • 복식
    • /
    • 제55권5호
    • /
    • pp.87-100
    • /
    • 2005
  • This study was to provide the fundamental data for a scientific and rational clothing construction by investigating the length variation of the upper body surface, using the method of surgical tape. The subjects were 15 early elementary schoolgirls in Busan area classified by three somatotypes, Arm-movements were consisted of 6 types. The statistical analyses used in this study were mean, standard deviation and the ANOVA and LSD procedure. The results of the analysis of the length of the upper body surface are as follows: By arm-movements, in the items of horizontal, front neck base girth, back upper bust girth, back bust girth and back under bust girth were increased and the other standard lines were apt to be decreased. In the items of vertical, all standard lines of front side and side seam length showed increased, the lines of bark side were apt to be decreased. The shoulder length represented the maximum rate of decrease($-36.59\%{\~}-48.98\%$) in M6($180^{\circ}$) and the side seam showed the maximum rate of increase($49.74\%{\~}59.22\%$) in the same movement.

사상인(四象人)의 형태학적(形態學的) 특징(特徵)에 관(關)한 연구(硏究) (A Morphologic Study of Sasang Constitution)

  • 이은주;고병희;송일병
    • 사상체질의학회지
    • /
    • 제10권2호
    • /
    • pp.181-220
    • /
    • 1998
  • 1. PURPOSE This is a quantitative analysis of Sasang Constitution by measuring human body except face. This study is carried out for the purpose of searching out the theory of Sa-cho and the morphologic theory of Sasang Constitution. 2. METHOD (1) SUBJECTS Subjects are 338 person came to Dept. of Sasang Constitutional Medicine (KyungHee Oriental Medical Center) and Oriental Medicine and Western Medicine Cooperative Health Examination Center (KyungHee Medical Center) from October 1997 to Jauary 1998. The mean age is $41.7{\pm}12.39$. (2) CLASSIFICATION OF SASANG CONSTITUTION QSCCII(Questionnaire for the Sasang Constitution Classification) is used for the Classification of Sasang Constitution. The distributions of Sasang Constitution Classification are Soeumin 83, Soyangin 98, and Taeumin 157. (3) MEASURING INSTRUMENT & ITEMS Length, Breadth, Circomferece, and Skinfold thickness of each body segment are measured by Martin's measuring instrument and Skinfold Caliper. Measured items of this study is based on Lohman's methods and is added new items. (4) DATA ANALYSIS The Volume, Weight, Rate, and Index of each group are calculated by using measuring items. The difference of each group is analyzed by SPSS 7.0 for Win. 3. RESULT (1) THE MORPHOLOGIC CHARACTERISTIC of TAEUMIN First of all, the Taeumin has a emormous morphology. His trunk is huge but head-neck and limbs is small. The volume and weight of head-neck is smaller than other body segments but the volume and weight of upper-abdomen is bigger than ones. (2) THE MORPHOLOGIC CHARACTERISTIC of SOEUMIN The Soeumin has a small morphology. His head-neck rate is bigger than Taeumin's but his trunk rate is smaller than Taeumin's. And his lower limbs rate is bigger than other constitution but it's not a significant difference. His neck is thinest and longgest than others. His chest is thin and narrow. His lower-abdomen rate is bigger than other constitution but it's difference is not significant. (3) THE MORPHOLOGIC CHARACTERISTIC of SOYANGIN Soyangin has a middle size at head-neck and chest part. But the rate of upper limb is higer than other constitution. And the rate of lower-abdomen part is lower than other constitution. but that's not significant.

  • PDF

학령중기 남아의 상지동작에 따른 상반신 체표변화 연구 (A Study on the Variation of the Upper Body Surface according to Arm-movements for Middle Elementary Schoolboys)

  • 김미영;여혜린;권영숙
    • 한국의류산업학회지
    • /
    • 제4권2호
    • /
    • pp.137-144
    • /
    • 2002
  • This study was to provide the fundamental data for a scientific and rational clothing construction by investigating the variation of the upper body surface with the use of the method of Surgical tape. The subject were 3 middle elementary schoolboys classified standard somatotype, and arm-movements were consisted of 6 types. The statistical analyses used in this study were mean, standard deviation and the ANOVA and LSD procedure. Shoulder point was moved to be the inside or upside and the shape of the armhole-line was differently changed as the arm-movement become larger. By moving to upside of the anterior armpit point, posterior armpit point and armpit point, the increase of the side seam length and the ascent of the line of width between armpits were distinct. And by arm-movements, in the items of horizontal, front neck base girth, back upper bust girth, back bust girth and back waist girth were increased and the other standard lines were apt to be decreased. In the items of vertical, all standard lines of front side and side seam length showed increased, back waist length and back length showed decreased. The variation of armhole was indefinite. In the rate of the variation, the shoulder length showed the maximum rate of contraction by 41.3%, decreasing 3.7 cm in $180^{\circ}$ degrees, and the side seam length showed the maximum rate of expansion by 60.6%, increasing 8.97 cm in the same degrees.

중년여성 상반신의 유형분석 (The Type Analysis of Middle Aged Woman's Upper Body)

  • 문명옥;임희경
    • 한국의류학회지
    • /
    • 제24권3호
    • /
    • pp.301-312
    • /
    • 2000
  • This study conducted an analysis of the middle aged women whose ages are from 35 to 59 years old in order to give those ladies much external satisfaction and covered body lines. I have come to present a few characters of body types as silhouettes which resulted in the factors of the upper bodies of middle aged women. I have adopted SAS(statistical analysis system) as a data process method of this survey. The followings are the results analysis. 1. The item of height have decreased, but increased in the items of thickness among the late middle aged women. 2. The body componant factor of middle aged women are extracted as 10 items, and the rate of their cumulative contribution is 78.9%. The first is the thickness of upper body, the second is the thickness of side upper body, the third is the height of upper body, the fourth is the length of upper body the fifth is width of upper body, the sixth is the projected rate of back, the seventh is the projected rate of breast, the eighth is the squared rate of shoulder, the ninth is the crooked rate of neck, and the tenth is the upper from of breast. 3. The body types of middle aged women can be classified into 4 types, and the followings are their characters. Type 1 is a standard type as the most common body character of the middle aged women, showing the appearing rate of 42.4%. Type 2 is a semi-curved body type like the curved figure of side body, showing the appearing rate of 34.5%. Type 3 is a reverse body type with the projected breast feature of front body, showing the appearing rate of 20.9%. Type 4 is a crooked body type with a tall height and crooked neck, showing the appearing rate of 2.2%.

  • PDF