• Journal of the Korean Home Economics Association
• /
• v.29 no.3
• /
• pp.209-226
• /
• 1991

This study aimed at providing the basic data for the measurement of the attitude for socialization of household work by analysis of the attitude for socialization of houselhold work according to demographic variables, the degree of acceptance for living change. This study was composed of the attitude for the socialization of household work was based on time, quality, cost factor. The results of this study were as follows: 1. The attitude for socialization of household work was influenced by sex, age, marriage, sex $\times$ marriage and the degree of acceptance for living change. 2. The variables which affected the attitude for socialization of household work independently had influence on it in the following order : the degree of acceptance for living change, sex, house type. 3. The result of path analysis had confirmed that sex, age, income marriage, house type variable indirectly influenced the attitude for socialization of household work through the degree of acceptance for living change. Sex, and marriage variable directly influenced on the attitude for socialization of household work. Through the this study. The attitude for socialization of houselhold work was influnced by the degree of acceptance for living change. Change of household work is socialization of household work and right attitude to the socialization fof household work is necessary for satisfaction of variouse needs. for saving of time and money through the socialization of household work.

• Journal of muscle and joint health
• /
• v.23 no.3
• /
• pp.152-158
• /
• 2016

Purpose:The purpose of this study was to examine the degree of joint pain, limitation of daily activities, and frequency of outpatient visits. Methods: This secondary analysis study used the data from the fifth Korean National Health and Nutrition Examination Survey (KNHNES). The data about general characteristics, prevalence and treatment of osteoarthritis, limitation of activities of daily living (ADL) and frequency of outpatient visits and hospitalization in 424 osteoarthritis patients over 50 years old were derived from the database. Data were analyzed with complex samples in SPSS ver. 20.0. Results: Among people with knee joint pain, 79.3% reported they had more than 4 out of 10 points of the degree of pain. Meanwhile, 97.3% of people with hip joint pain reported that they had more than 4 out of 10 points of the degree of pain. People reporting 10 out of 10 point of pain were 21.4% of those with knee joint pain and 25% of those with hip joint pain. The mean of the degree of knee joint pain was 6.35, and the mean of the degree of hip joint pain was 6.89 out of 10 points. About 50% of people with osteoarthritis visited an outpatient clinic within the last 2 weeks, and 27% had limitation of ADL. Conclusion: It is necessary to develop an integrated intervention program to improve quality of life in patients with osteoarthritis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.4
• /
• pp.201-210
• /
• 2000

The Rehabilitation and repair of structurally deteriorated reinforced concrete structure become more necessary as time goes by. The goal of this study is that provide the data about flexural retrofitted effect of RC beam strengthened by Steel Plate. In order to provide the data, 6 specimens were manufactured and divided with standard specimen and damaged degree A, B, C. Division of damaged A, B, C is based on deflection and degree of crack. In the determination of deflection and degree of crack, we loaded standard specimen to failure under two-point bending to find yielding load and failure load, and then we found deflections and degree of crack that correspond to 75%, 100%, 105% of the yielding load of standard specimen respectively. When we are compared with standard specimen and strengthened specimens, we founded from the experimental results that flexural capacity of structurally damaged beam strengthened by Steel Plate incremented highly, ductility was decreased, and energy absorbtion capacity was almost same.

• Journal of Korean society of Dental Hygiene
• /
• v.21 no.3
• /
• pp.281-290
• /
• 2021

Objectives: The purpose of this study was to identify the degree of adaptation of dental hygiene department students to campus life, and to provide basic data to prepare management strategies for effective campus life adaptation. Methods: Three hundred students in the department of dental hygiene in Busan Metropolitan City and Gyeonggi Province were surveyed from October 1 to October 30, 2020 and 291 questionnaires were used in the final data analysis. Results: Better adaptation to campus life was observed in subjects who participated in club activities, possessed an extrovert personality, were well adapted to the dental hygiene department, and had no conflict in interpersonal relationships, thereby showing a significant difference. Regarding the factors affecting the degree of satisfaction with the department, the higher the degree of satisfaction in the major, excellence in major, and coping ability, the higher was the degree of satisfaction with the department. Conclusions: For effective campus life adaptation of the university students as a way to increase the degree of satisfaction with the department, increasing the ability to adapt to campus life through achievement of pride in the major and participation in various interpersonal activities is a possibility. It is necessary to develop a program to create an environment for good adaptation to campus life.

• Journal of Oriental Neuropsychiatry
• /
• v.14 no.2
• /
• pp.107-115
• /
• 2003

This study was conducted to investigate the subjective degree of fatigue, the degree of fatigue depending on analysis of MMPI and SDNN in middle-aged women. Data were collected from 51 patients, registered at Oriental Medicine Hospital in J-city and K-city respectively. The instrument used in this study were the Multidimensional Assessment of Fatigue developed by Belza(1995) and revised by Jung & Kim(1999) and the Minnesota Multiphasic Personality Inventory(MMPI) and Standard Deviation of Normal to Normal(SDNN). The collected data were analyzed by SPSS/WIN 9.0 program using frequencies, percentage, mean, standard deviation, t-test. The degree of fatigue in middle-aged women: the average score 30.61 out of the total score 40. Subdivision of fatigue scores: common fatigue degree 7.71, distress due to fatigue 7.67, degree of daily activity fatigue 7.43, and fatigue frequency in the previous week 7.84. The degree of fatigue according to subjective recognition was shown significant difference(t=6.707, p=.000).: group of recognition (33.58), group of ignorance (23.47). The degree of fatigue according to MMPI was shown significant difference. : In the group of recognition, scales of Hs, D, Hy, Pt were higher. The degree of fatigue according to SDNN was shown significant difference (T=-4.062, P=.000). : group of recognition (33.47ms), group of ignorance (45.70ms). The total fatigue score and scales of Hs, D, Hy in MMPI was correlated positively (r=.576; r=.466; r=.518), and total fatigue score and SDNN was correlated negatively (r=-.576). Conclusively fatigue is one of difficult problems in middle-aged women. Therefore it is necessary to develope some nursing intervention for reducing fatigue in its early stages.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.7 no.2
• /
• pp.245-253
• /
• 2001

The aim of this study is to describe degree of fatigue and factors related to fatigue in patients with rheumatoid arthritis. The subjects of the study consist of one hundred fifty-eight outpatients with rheumatoid arthritis at three university hospitals in Taegu between July 10 and August 30, 1999. The instrument used in this study was the Multidimensional Assessment of Fatigue developed by Belza et al.(1995) and revised by Jung, Bok Hee. Kim, Myung Ae(1998). Analysis of data was done by using the descriptive statistics, t-test, ANOVA and Duncan with SPSS program. The major findings can be summarized as follows: 1. Degree of fatigue in patient with Rheumatoid Arthritis was shown the average 22.91 out of the total scores 40. Four subscales of fatigue scores are common fatigue degree 6.37, fatigue timing at the last week 5.92, distress due to fatigue 5.40 and degree of daily activity fatigue 5.22. Among the realms of daily activity fatigue, outdoor activity(6.00), sexual life(5.84), doing the household(5.66), shopping(5.61), other exercise except stroll(5.54) were shown the high degree of fatigue and cooking(4.97), a stroll(4.48), recreation(4.35) showed the low degree of fatigue. 2. There were no significant differences on the total degree of fatigue according to demographic variables. But there were some significant differences on the subscale fatigue scores according to demographic variables. Degree of daily activity fatigue according to sex was shown significant difference (t=-2.358, p=.020), and according to education level was shown significant difference(F=3.938, p=.005) and common fatigue degree according to age was shown significant difference(F=2.853, p=.026). Conclusively fatigue is one of difficult problems for patients with rheumatoid arthritis. Therefore it is necessary to develop some nursing intervention for reducing fatigue of rheumatoid arthritis patients.

• Design & Manufacturing
• /
• v.16 no.3
• /
• pp.9-15
• /
• 2022

In order to reduce the manufacturing costs of the glass lens, it is necessary to manufacture a lens using a UV curable resin or a thermosetting resin, which is a curable material, in order to replace a glass lens. In the case of forming a lens using a thermosetting material, it is necessary to form several lenses at once using the wafer-level lens manufacturing technologies due to the long curing time of the material. When a lens is manufactured using a curable material, an error in the shape of the lens due to the shrinkage of the material during the curing process is an important cause of defects. The major factors for these shape errors and deformations are the shrinkage and the change of mechanical properties in the process of changing from a liquid material during curing to a solid state after complete curing. Therefore, it is necessary to understand the curing process of the material and to examine the shrinkage rate and change of physical properties according to the degree cure. In addition, it is necessary to proceed with CAE for lens molding using these and to review problems in lens manufacturing in advance. In this study, the viscoelastic properties of the material were measured during the curing process using a rheometer. Using the results, Rheological investigation of cure kinetics was performed. At the same time, The shrinkage of the material was measured and simple mathematical models were created. And using the results, the molding process of a single lens was analyzed using Comsol, a commercial S/W. In addition, the experiment was conducted to compare and verify the CAE results. As a result, it was confirmed that the shrinkage rate of the material had a great influence on the shape precision of the final product.

• Journal of dental hygiene science
• /
• v.11 no.1
• /
• pp.7-14
• /
• 2011

This paper aims to comprehend the career plan and job view of the students of Dept. of Dental Hygiene who are expected to graduate with a bachelor of science degree, explain the characteristics of their jobs after graduation, compare them with the graduates of associate of science degree and finally give a basic data necessary for developing careers in the future. From the survey of 184 would-be graduates of Departments of Dental Hygiene at 6 universities that produce dental hygiene graduates in 2011 and 251 would-be graduates with a A.S. degree of Dept. of Dental Hygiene, whose course takes 3 years, this paper reaches the conclusion below. More graduates with B.S. degree in dental hygiene than those with a A.S. degree want to attend graduate school after graduation. It is found that most of the graduates with B.S. degree in dental hygiene wanted to work as a dental hygienist until they reach retirement age after getting a job. They favor dental hospitals, which give them a higher salary and ensure them of retirement age. They have a lower-esteemed job view: they think that their jobs are socially lower regarded, compared with graduates with a A.S. degree. It is found that those who wish to attend graduate school have lower job satisfaction than those who want to get a job after graduation. It is necessary for the educational institutes of dental hygiene to teach their graduates have a positive attitude their job and for the association to make an active effort to increase the job satisfaction of dental hygiene students as well as dental hygienists by enhancing social recognition of a dental hygiene.

• Journal of Families and Better Life
• /
• v.16 no.2
• /
• pp.1-10
• /
• 1998

This study purpose to know the degree of adolescent consumer's conspicuous consumption how difference do adolescent consumers' conspicuous consumption have by socio demographic variables socio-psychological variables consumer ability. Therefore we suggest the adolescent consumer's sound consumption to consumer education. To approach to above purpose the research question are as the followings. 1) The average level of conspicuous consumption a little low median point. This implies that comsumer education is necessary for the adolescent consumer in order to reduce the level of conspicuous consumption. 2) Theadolescent consumers' consumption differs significantly according to the sex(p<0.05) monthly mean income of family(P<0.01) degree of taking in massmedia (P<0.01) subjective status on oneself(P<0.01) consumer socialization(P<0.01) 3) According to the results of the regression analysis examining the relative influences of variables affecting for conspicuous consumption the rela ive importance of the variables ; degree of taking in massmedia sex consumer knowledge communication with peers consumer attitude and the amount of allowance.

• Journal of Korean Society for Quality Management
• /
• v.31 no.4
• /
• pp.1-18
• /
• 2003

Quality is a critical competitive factor in today's environment because of the impact of quality on costs and delivery. Many companies regard quality as a key concept of company strategy in order to achieve the competitive edge. Measuring and reporting quality cost is the first step in quality management program. The supposition of quality cost model is that investment in prevention activities will bring rewards from reduced failure costs, and that further investment in prevention activities will show profits from reduced appraisal costs. In this study, the degree of quality cost deviation is conceptualized. This means a deviation between the ideal and present ranking in the amounts of quality cost categories. This study analysed that the effect of its deviation on quality management activity and performance variables. However, there are no difference in these variables. The major reason is that most of companies are endeavoring for quality management but operating quality cost system unsystematically. The review against a prevention and appraisal activity is necessary.