고기동 유도탄은 짧은 시간에 큰 추력을 필요로 하는 발사체이다. 유도탄의 비행에 필요한 추력을 얻기 위하여 고체 연료를 폭발적으로 연소시키면 고온, 고압의 연소 가스가 발생되고, 이 연소 가스를 초음속 노즐을 통하여 팽창시킴으로서 큰 추력을 얻게 된다. 로켓 모터의 작동 시간은 수초 미만에 지나지 않으나 큰 추력을 내기 위해 고온 고압의 연소 가스가 이용됨으로 평창 과정 중 시스템 부품의 파손 혹은 노즐목 부근에서 삭마현상이 발생되기도 한다. 즉, 탄의 정확한 제어를 위해서는 연소 가스와 벽면과의 열전달에 따른 열응력과 유동장 내의 압력의 변화에 따른 구조체 응력이 동시에 고려된 정확한 응력해석이 선행되어야만 한다. 본 논문에서는 예비 설계된 추력 발생장치에 고온 고압의 연소 가스가 유동할 때 모터의 작동시간에 따른 구조체의 안전성을 응력과 재료의 용융온도의 측면으로부터 구명하였다.
난지도 매립장 하부지반을 통한 오염이동 특성을 2차원 유한 요소 오염이동 모델을 이용하여 알아보고 부분적인 차폐벽을 매립장 주위에 설치하였을 경우 초래되는 매립장내 침출수 누적 효과를 유한 차분 지하수흐름 모델을 이용하여 분석하였다. 분석에 사용된 입력계수는 현장에서 측정된 오염농도 자료를 이용 검증한 후 향후 30년 동안에 한강변으로 누출될 수 있는 오염농도 변화를 분석하고 매립장내 침출 수두와 확산계수의 증가가 오염물 이동에 미치는 민감도를 알아보았다. 오염이동 해석 결과 한강주변의 난지도 매립장 침출수로 인한 염소이온농도 최대값은 1488 mg/l로서 매립장 패쇄후 17년만에 이루어지는 것으로 나타났다. 매립장내 침출수위와 확산계수의 변화는 모두 침출수 이동을 촉진하나 침출수위면이 증가 할수록 침출수 농도 증가 폭은 커져가는 반면 확산계수 증가에 대한 침출수 농도 증가 폭은 작아져서 일정 농도로 수렴하는 경향을 보였다.
대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
/
pp.639-643
/
2002
The main purpose of this study was to investigate the formation mechanisms of imperfections such as irregular humps, outer cavity and inner cavity in the laser fusion zone of diamond saw blade. Laser beam welding was conducted to join two parts of blade; mild steel shank and Fe-Co-Ni sintered tip. The variables were beam power and travel speed. The microstructure and elements distributions of specimens were analyzed with SEM, AES, EPMA and so on. It was found that these imperfections were responded to heat input. Irregular humps were reduced in 10.4∼17.6kJ/m heat input range. However there were no clear evidences, which could explain the relations between humps formation and heat input. The number of outer cavity and inner cavity decreased as heat input was increased. Considering both possible defects formations mechanisms, it could be thought that outer cavity was caused by insufficient refill of keyhole, which was from rapid solidification of molten metal and fast molten metal flow to the rear keyhole wall at low heat input. More inner cavities were found near the interface of the fusion zone and sintered segment and in the bottom of the fusion zone. Inner cavity was mainly formed in the upper fusion zone at high heat input whereas was in the bottom at low heat input. Inner cavity was from trapping of coarsened preexist pores in the sintered tip and metal vapor due to rapid solidification of molten metal before the bubbles escaped.
수중 청음기는 진동하는 물체 위에 설치되어 다양한 외부 잡음 원이 유입되는 환경에 노출되어 있다. 외부 잡음 원으로는 수중 청음기가 설치된 구조물 자체의 진동, 프로펠러 잡음, 그리고 유동 유기 잡음들이 있고, 이들 외부 잡음원은 실제 강도가 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 연구에서는 외부 잡음에 무관한 고 정밀도, 저 잡음 특성을 갖는 수중 청음기를 개발하기 위하여 유한 요소법(FEM)을 사용하여 잡음 전달 특성의 분석 및 air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 개선된 구조의 수중 청음기를 설계하고, 내 잡음성 평가를 하였다. 그 결과 센서 측면 하단부에 잡음 원이 위치할 경우 가장 큰 잡음 신호로 작용하므로 구조를 변경한 결과 기존 수중 청음기에 비해 59% 이상 내 잡음성을 증진 시켰다.
산화제 주입기 배열 변화에 따른 End-Burning 하이브리드 연소기의 연소실 내부 유동장의 특성 및 온도장 분포도의 경향을 파악하기 위해 수치해석적 연구를 수행하였다. 스월을 동반하는 하이브리드 연소실내 확산 화염의 주요 거동을 얻기 위해 7가지의 다른 O/F 비를 갖는 연소의 기본 특성을 분석하였다. 산화제 주입기의 위치 변화 및 공급방식이 연료와 산화제의 혼합율을 크게 지배하고 온도분포에도 강한 영향을 미치는 것을 확인할 수 있었다. 본 연구에 사용된 여러 산화제 주입기 배열중에서 counter rotating 유동을 유발시키는 주입기가 가장 좋은 혼합효율을 보였으나 벽면 근처에서 관찰된 고온부의 발생 문제가 대두되었다.
The main purpose of this study was to investigate the formation mechanisms of imperfections such as irregular humps, outer cavity and inner cavity in the laser fusion zone of diamond saw blade. Laser beam welding was conducted to join two parts of blade; mild steel shank and Fe-Co-Ni sintered tip. The variables were beam power and travel speed. The microstructure and elements distributions of specimens were analyzed with SEM, AES, EPMA and so on. It was found that these imperfections were responded to heat input. Irregular humps were reduced in 10.4∼l7.6kJ/m heat input range. However there were no clear evidences, which could explain the relations between humps formation and heat input. The number of outer cavity and inner cavity decreased as heat input was increased. Considering both possible defects formations mechanisms, it could be thought that outer cavity was caused by insufficient refill of keyhole, which was from rapid solidification of molten metal and fast molten metal flow to the rear keyhole wall at low heat input. More inner cavities were found near the interface of the fusion zone and sintered segment and in the bottom of the fusion zone. Inner cavity was mainly formed in the upper fusion zone at high heat input whereas was in the bottom at low heat input. Inner cavity was from trapping of coarsened preexist pores in the sintered tip and metal vapor due to rapid solidification of molten metal before the bubbles escaped.
The aim of this paper is to enhance the accuracy of predicting time-averaged external surface pressures on low-rise buildings by utilizing Computational Fluid Dynamics (CFD) simulations. To achieve this, benchmark studies of the Silsoe cube and the Texas Tech University (TTU) experimental building are employed for comparison with simulation results. The paper is structured into three main sections. In the initial part, an appropriate domain size is selected based on the precision of mean pressure coefficients on the windward face of the cube, utilizing Reynolds Averaged Navier-Stokes (RANS) turbulence models. Subsequently, recommendations regarding the optimal computational domain size for an isolated building are provided based on revised findings. Moving on to the second part, the Silsoe cube model is examined within a horizontally homogeneous computational domain using more accurate turbulence models, such as Large Eddy Simulation (LES) and hybrid RANS-LES models. For computational efficiency, transient simulation settings are employed, building upon previous studies by the authors at the Windstorm Impact, Science, and Engineering (WISE) Lab, Louisiana State University (LSU). An optimal meshing strategy is determined for LES based on a grid convergence study. Three hybrid RANS-LES cases are investigated to achieve desired enhancements in the distribution of mean pressure coefficients on the Silsoe cube. In the final part, a 1:10 scale model of the TTU building is studied, incorporating the insights gained from the second part. The generated flow characteristics, including vertical profiles of mean velocity, turbulence intensity, and velocity spectra (small and large eddies), exhibit good agreement with full-scale (TTU) measurements. The results indicate promising roof pressures achieved through the careful consideration of meshing strategy, time step, domain size, inflow turbulence, near-wall treatment, and turbulence models. Moreover, this paper demonstrates an improvement in mean roof pressures compared to other state-of-the-art studies, thus highlighting the significance of CFD simulations in building aerodynamics.
흐름이 연직유공벽을 통과할 때 발생하는 수두손실을 수치해석과 수리실험을 통하여 고찰하였다. 수치 해석에 대해서는 유공벽 전 후의 검사체적에 연속방정식, 모멘텀 방정식, 그리고 에너지 방정식을 적용하였으며 주어진 하류 쪽 수심과 유속에 대하여 상류 쪽 수심 및 유공벽 수두손실을 계산할 수 있는 무차원 관계식을 유도 하였다. 수리실험은 단일유공판과 삼중유공판에 대하여 각각 수행하였다. 단일유공판에 대한 계산결과와 실험결과를 비교하여 유공부 오리피스에서 연직 선형 제트류의 수축계수가 개구율뿐만 아니라 하류 쪽 Froude 수에도 의존함을 밝혔으며, 실험결과에 근거하여 수두손실을 계산하기 위한 실험식을 제시하였다. 단일유공판의 실험식을 삼중유공판에 대하여 하류에서 상류 쪽으로 축차적으로 적용한 결과, 예측치와 실험결과가 대체적으로 잘 일치함을 확인하였다.
Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.
본 연구는 실제 선박 주위의 점성 유동에 대해 RANS방정식을 사용하여 해석함으로써 그 계산 방법의 타당성 및 선형 설계에의 유효성을 입증하고, 모형선 크기에 따른 점성 유동의 영향, 즉 척도효과에 대한 기초 연구를 목적으로 하였다. 높은 레이놀즈수에서의 난류유동을 계산하기 위해 k-${\varepsilon}$ 난류모형을 채용하였으며, 물체 근처에서는 벽법칙을 사용하였다. 선체의 3차원 형상을 효과적으로 처리하기 위해 물체적합좌표계를 이용하여 실제영역에서 유도된 지배방정식을 계산영역으로 변환시켰으며, 유한체적법을 사용하여 이산화시켰다. 압력 계산은 SIMPlE법을 사용하였으며, 이산화된 식들은 TDMA를 이용한 선순법으로 해를 구하였다. 실제 계산대상 선박은 4410 TEU급 콘테이너 운반선과 50,000 DWT급 살물 운반선으로 모형선 크기와 실선 크기에 대해 점성유동을 해석하여 비교하였으며, 모형선에 대해서 저항시험, 프로펠러 면에서의 반류분포 조사 시험, 그리고 한계유선 조사시험을 수행하여 계산결과와 비교 검토하였다. 계산결과는 선미 유동장에서의 평균속도와 압력 분포에 있어서 선미 형상에 따른 효과와 척도효과를 잘 묘사하고 있다. 특히, 계산된 프로펠러 변에서의 반류분포와 선체 표변에서의 한계유선 분포는 실험과 정성적으로 잘 일치하고 있으며, 점성저항 추정에 있어서는 실험 값과 ${\pm}5%$ 이내로 예측하고 있음을 보여 주고 있어 선형 개발의 설계 도구로 활용될 수 있음을 알 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.