• 한국안광학회지
• /
• 제13권1호
• /
• pp.71-76
• /
• 2008

목적: 저온에서 열처리에 의해 소다-라임-실리카 유리 위에 강한 UV방사 나노결정 ZnO박막을 단순하고 효율적 방법으로 개선하고자 한다. 방법: 소다-라임-실리카 유리 위에 코팅되고 전열처리 및 300$^{\circ}C$의 후열처리를 행하여 제조된 나노 결정질 ZnO 박막의 결정 구조적, 표면 형상적 및 광학적 특성을 X-선 회절 분석, 전계방사 주사형 전자 현미경, 원자간력 현미경, ultra violet - visible - near infrared spectrophotometer 및 photoluminescence를 이용하여 분석하였다. 결과: 가시광 영역에서 높은 투과율과 자외부에서 뚜렷한 흡수밴드를 갖는 c-축으로 고배향된 ZnO 박막을 300$^{\circ}C$의 후열처리를 통하여 얻을 수 있었다. 비교적 뚜렷한 near band edge 발광을 보이는 photoluminescence 스펙트럼이 나타났으며, 결함에 의한 완만한 녹색 발광은 거의 관찰되지 않았다. 결론: 앞으로 본 연구는 300$^{\circ}C$ 이하의 저온에서 저렴하고 쉽게 ZnO을 기초로한 광전기 소자에 적용될 것이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.859-862
• /
• 2003

Well-aligned multiwall carbon nanotubes (MWCNTs) were prepared at low temperature of 400 $^{\circ}C$ by utilizing a radio frequency plasma-enhanced chemical vapor deposition (rf-PECVD) system. The MWCNTs were treated by an external rf plasma source and an ultra-violet laser in order to modify structural defect of carbon nanotube and to ablate possible contamination on carbon nanotube surface. Structural properties of carbon nanotubes were investigated by using a scanning electron microscopy (SEM), Raman spectroscopy, Fourier transformer Infrared spectroscopy (FTIR) and transmission electron microscope (TEM). In addition, the emission properties of the MWNTs were measured for the application of field emission display (FED) in near future. Various post treatments were found to improve the field emission property of carbon nanotubes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1331-1333
• /
• 2005

A magnesium thiogallate phosphor doped with europium was prepared by solid-state method. This phosphor has green emission near 535 nm due to the allowed transition from $4f^65d$ at an excitation state $(T_{2g})$ to $4f^7 (^8S_{7/2}) at a ground state of $Eu^{2+}$ ion. This phosphor shows a wide excitation spectrum from ultra violet (300 nm) to bluish green (515 nm).

• 한국전기전자재료학회논문지
• /
• 제14권3호
• /
• pp.246-250
• /
• 2001

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of355 nm. In order to investigate the emission properties of ZnO thin films, Pl measurements with an Ar ion laser a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited Pl bands centers around 390, 510 and 640 nm, labeled near ultra-violet(UV), green and orange bands. Structural properties of ZnO thin films are analyzed with X-ray diffraction(XRD).

• Current Photovoltaic Research
• /
• 제3권3호
• /
• pp.91-96
• /
• 2015

Optical modeling and characterization of transparent dye-sensitized solar cells (DSC) are presented to design and estimate DSC devices numerically. In order to model the inhomogeneous active layer of DSC, the porous structure of titanium oxide ($TiO_2$) and dye mixture, we prepared films consisting of layer by layer of the DSC's basic materials sequentially, and characterized the optical parameters of the films with the effective refractive index, which was extracted from the transmittance and reflectance measurements in ultra violet to near infra-red range. By using the effective refractive index, we made the optical model for DSC, and demonstrated that the optical model based on effective refractive index can be used to design and evaluate the performance of transparent-type DSC modules.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.422-424
• /
• 2000

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of 355 nm. In order to investigate the emission properties of ZnO thin films, PL measurements with an Ar ion laser as a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited PL bands centered around 390, 510 and 640 nm, labeled near ultra-violet (UV), green and orange bands. Structural properties of ZnO thin films are analized with X-ray diffraction (XRD).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.539-542
• /
• 2000

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of 355 nm. In order to investigate the emission properties of ZnO thin films, PL measurements with an Ar ion laser as a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited PL bands centered around 390, 510 and 640 nm, labeled near ultra-violet (UV), green and orange bands. Structural properties of ZnO thin films are analized with X-ray diffraction (XRD).

• 한국전자파학회논문지
• /
• 제26권1호
• /
• pp.101-112
• /
• 2015

II~VI족 화합물 반도체 $Zn_xCd_{1-x}S$ 박막을 Indium-tin-oxide(ITO)가 도포된 유리기판 상에 열증발법을 사용하여 증착하였다. 박막의 합성비(molar ratio) x($0{\leq}x{\leq}1$)는 CdS(x=0) 박막과 ZnS(x=1) 박막을 포함하여, 삼원화합물 $Zn_xCd_{1-x}S$ 박막을 제조하기 위하여 변화시켰다. 또한, 증착한 박막의 결정성을 높이기 위하여 진공전기로에서 열처리 하였으며, 분광학적 특성조사를 위해서는 $400^{\circ}C$에서 열처리한 $Zn_xCd_{1-x}S$ 박막이 최적임을 알았다. $Zn_xCd_{1-x}S$ 박막의 합성비(x)와 전자적 구조를 조사하기 위하여 X-선 광전자 분광법(XPS)을 사용하였고, 박막시료의 광학적 에너지 띠 간격 $E_g$는 자외선-가시광-근접 적외선(UV-Vis-NIR) 분광법으로 측정하였으며, 합성비(x)값이 0에서 1까지 변화함에 따라 2.44~3.98 eV 범위의 값을 보여주었다. 끝으로, THz-TDS(Time Domain Spectroscopy) 시스템을 사용하고 $Zn_xCd_{1-x}S$ 박막의 THz파 특성을 측정하여 테라헤르츠(THz) 영역용 전자 및 광학 소자로서 응용가능성을 확인하였다.

• 대한원격탐사학회지
• /
• 제39권6_1호
• /
• pp.1497-1503
• /
• 2023

본 연구는 Near-UltraViolet (UV) 파장에서의 지표면 반사도 산출 시 발생하는 구름과 적설의 분류 한계를 극복하기 위해 Geostationary Environmental Monitoring Spectrometer (GEMS)와 Advanced Meteorological Imager (AMI) 위성의 구름 자료를 융합하여 적설역에서의 지표면 반사도 품질을 향상시키는 방법을 제안한다. GEMS 구름 산출물과 AMI 구름탐지 자료를 기반으로 융합 구름자료를 생산하였으며, 이를 GEMS 지표면 반사도 산출에 적용하였다. 그 결과 적설역에서 GEMS 구름 산출물만 사용한 경우에 비해 미산출이 개선되었으며 이는 전체 관측 영역에서 약 17%의 개선 효과를 확인하였다. 본 연구 결과는 융합 구름자료를 활용하여 적설역에서 지속적으로 발생했던 지표면 반사도 미산출 문제를 개선할 수 있음을 입증하며, 이를 통해 산출된 고품질의 지표면 반사도를 기반으로 타 Level-2 산출물의 품질향상을 기대할 수 있다.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.138-144
• /
• 2016

The discharge characteristics of pulse-driven coplanar micro barrier discharges for an ultraviolet (UV) light source using Ne-Xe mixture have been investigated using a two-dimensional fluid simulation at near-atmospheric pressure. The densities of electrons, the radiative excited states, the metastable excited states, and the power loss are investigated with the variations of gas pressure and the gap distance. With a fixed gap distance, the number of the radiative states $Xe^*(^3P_1)$ increases with the increasing driving voltage, but this number shows weak dependency on the gas when that pressure is over 400 Torr. However, the number of the radiative states increases with the increase of the gap distance at a fixed voltage, while the power loss decreases. Therefore, a long gap discharge has higher efficiency for UV generation than does a short gap discharge. A slight change in the electrode tilt angle enhances the number of radiative species 2 or 3 times with the same operation conditions. Therefore, the intensity and efficiency of the UV light source can be controlled independently by changing the gap distance and the electrode structure.