• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3367-3371
• /
• 2013

MgO nanorods were fabricated by the thermal evaporation of $Mg_3N_2$. The influence of ZnO sheathing and hydrogen plasma exposure on the photoluminescence (PL) of the MgO nanorods was studied. PL measurements of the ZnO-sheathed MgO nanorods showed two main emission bands: the near band edge emission band centered at ~380 nm and the deep level emission band centered at ~590 nm both of which are characteristic of ZnO. The near band edge emission from the ZnO-sheathed MgO nanorods was enhanced with increasing the ZnO shell layer thickness. The near band edge emission from the ZnO-sheathed MgO nanorods appeared to be enhanced further by hydrogen plasma irradiation. The underlying mechanisms for the enhancement of the NBE emission from the MgO nanorods by ZnO sheathing and hydrogen plasma exposure are discussed.

• 한국정보통신학회논문지
• /
• 제21권5호
• /
• pp.861-868
• /
• 2017

도핑 되지 않은 반 절연 LEC GaAs내의 EL2와 얕은 준위 분포를 영상화하기 위해 대역단 적외선 영상 기법을 활용했다. 대역단 적외선 투사 매핑에 근거한 본 기법은 분석 속도가 빠르고 비파괴적인 방법이다. EL2 흡수 영상이 콘트라스트 반전되는 대역단 부근에 대한 정량적인 해석은 아직 보고되지 않고 있다. 본 논문은 대역단 부근에서 영상의 특정 부분(cell, wall)에 대한 포토퀀칭 메커니즘의 스펙트럼-, 공간- 및 온도- 종속성을 논하고 있다. 결함 부분별(EL2w, EL2b)로 포토퀀칭 개시점이 다른 것은 불순물 종류의 차이로 인한 서로 다른 전기적 작용에 기인한 것으로 해석할 수 있다. 전위(dislocation) 밀도가 높은 곳에서는 EL2b 밀도는 약간 적은 반면 EL2w 밀도는 보다 많다는 것을 정량적 해석으로부터 확인 했다.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.102-111
• /
• 2015

This paper proposes an algorithm for recovering the colors of objects from multiple near-infrared (near-IR) images. The International Commission on Illumination (CIE) color coordinates of objects are recovered from a series of gray images captured under multiple spectral near-IR illuminations using polynomial regression. The feasibility of the proposed algorithm is tested experimentally by using 24 color patches of the Color Rendition Chart. The experimental apparatus is composed of a monochrome digital camera without an IR cut-off filter and a custom-designed LED illuminator emitting multiple spectral near-IR illuminations, with peak wavelengths near the red edge of the visible band, namely at 700, 740, 780, and 860 nm. The average color difference between the original and the recovered colors for all 24 patches was found to be 11.1. However, if some particular patches with high value are disregarded, the average color difference is reduced to 4.2, and this value is within the acceptability tolerance for complex image on the display.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.1-5
• /
• 2007

GaN thin fan were grown by spin coated colloidal GaOOH precursor. Polycrystalline GaNs with crystalline size of $10{\sim}100nm$ were grown on $SiO_2$ substrate. The shape of crystallite above $900^{\circ}C$ had the hexagonal plate and column type. X-ray diffraction patterns for them correspond to those of the hexagonal wurtzite GaN. With increasing droplets. i.e, thickness of deposited layers, XRD intensity increased. PL (photoluminescence) spectrum consisted with an weak near band-edge emission at 3.45 eV and a broad donor-acceptor emission band at 3.32 eV. From the low temperature PL measurement on GaN grown at $800^{\circ}C$ that the shallow donor-acceptor recombination induced emission was more intense than the near band-edge excitonic emission.

• 대한원격탐사학회지
• /
• 제33권5_1호
• /
• pp.571-585
• /
• 2017

적색경계밴드(red-edge band)가 식물의 생물리적 특성과 밀접한 관계를 가지고 있다고 알려지고 있으며, 이에 따라 최근 적색경계밴드를 포함한 위성영상센서가 증가하고 있다. 본 연구는 향후 농림업중형위성에 적색경계밴드 탑재를 계획하고 있는 점을 감안하여, 적색경계밴드와 관련된 연구 현황과 활용 가치를 분석하고자 한다. 수관울폐도가 높은 우리나라 산림의 엽면적지수(Leaf Area Index, LAI) 추정에 있어서 적색경계밴드의 효과를 분석하였고, 더 나아가 LAI 추정을 위한 최적의 파장폭과 파장영역을 도출하고자 하였다. LAI가 5 이상인 갈참나무와 리기다소나무를 대상으로 4월부터 10월까지 시계열 분광반사 측정자료를 이용하여 LAI와의 상관관계를 분석하였다. 분광반사측정자료에서 5개의 파장폭(10 nm, 20 nm, 30 nm, 40 nm, 50 nm)과 71개의 중심파장(680 nm부터 750 nm까지 1 nm 간격)을 달리하여 모두 355개의 적색경계밴드를 모의 생성했다. 적색경계밴드를 기반으로 하는 두 개의 분광지수 NDRE(normalized difference red-edge index)와 CIRE(chlorophyll index red-edge)를 산출하여 LAI와 상관관계를 분석하였다. 적색경계밴드 기반의 분광지수인 NDRE 및 CIRE는 수관울폐도가 높은 갈참나무와 리기다소나무의 LAI와 높은 상관관계를 얻을 수 있었다. 이는 수관울폐도가 높은 국내 산림에서 일반적으로 사용되는 NDVI가 LAI와의 상관관계가 낮게 나타났던 한계를 해결할 수 있는 가능성을 보여주었다. 10 nm부터 50 nm까지 적색경계밴드의 파장폭 효과는 산림의 LAI와 관계에서 큰 차이를 보이지 않았다. LAI와 최대 상관관계를 보이는 적색경계밴드의 중심파장은 갈참나무에서는 720 nm 부근, 그리고 리기다소나무에서는 710 nm 주변으로 나타났다. 우리나라 농작물 및 산림의 식생정보 획득과 모니터링을 위한 최적의 적색경계밴드의 파장폭과 파장영역을 결정하기 위해서는 다른 생물리적인자(엽록소, 질소, 수분함량, 생체량 등)와의 관계도 충분히 고려하여야 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.134.2-134.2
• /
• 2014

Photonic crystal solar cells have the potential for addressing the disparate length scales in polymer photovoltaic materials, thereby confronting the major challenge in solar cell technology: efficiency. One must achieve simultaneously an efficient absorption of photons with effective carrier extraction. Unfortunately the two processes have opposing requirements. Efficient absorption of light calls for thicker PV active layers whereas carrier transport always benefits from thinner ones, and this dichotomy is at the heart of an efficiency/cost conundrum that has kept solar energy expensive relative to fossil fuels. This dichotomy persists over the entire solar spectrum but increasingly so near a semiconductor's band edge where absorption is weak. We report a 2-D, photonic crystal morphology that enhances the efficiency of organic photovoltaic cells relative to conventional planar cells. The morphology is developed by patterning an organic photoactive bulk heterojunction blend of Poly(3-(2-methyl-2-hexylcarboxylate) thiophene-co-thiophene) and PCBM via PRINT, a nano-embossing method that lends itself to large area fabrication of nanostructures. The photonic crystal cell morphology increases photocurrents generally, and particularly through the excitation of resonant modes near the band edge of the organic PV material. The device performance of the photonic crystal cell showed a nearly doubled increase in efficiency relative to conventional planar cell designs. Photonic crystals can also enhance performance of other optoelectronic devices including organic laser.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.58-58
• /
• 2003

Silver doped ZnO (SZO) films were prepared by rf magnetron sputtering on glass substrates with extraordinary designed ZnO target. With the doping source for target, use AgNO$_3$ powder on a various rate (0, 2, and 4 wt.%). We investigated dependence of coating parameter such as dopant content in target and substrate temperature in the SZO films. The SZO films have a preferred orientation in the (002) direction. As amounts of the Ag dopant in the target were increased, the crystallinity and the transmittance and optical band gap were decreased. And the substrate temperature were increased, the crystallinity and the transmittance were increased. But the crystallinity and the transmittance of SZO films were retrograde at 200$^{\circ}C$. Upside facts were related with composition. In addition, the Oxygen K-edge features of the SZO films were investigated by using near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Changes of optical band gap of the SZO films were explained compared with XRD, XPS and NEXAFS spectra.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.15-21
• /
• 2004

An edge tone is the discrete tone or narrow-band sound produced by an oscillating free shear layer, impinging on a rigid surface. In this paper, we present a 2-D edge tone to predict the frequency characteristics of the discrete oscillations of a jet-edge feedback cycle, using the finite difference lattice Boltzmann method (FDLBM). We use a modified version of the lattice BGK compressible fluid model, adding an additional term and allowing for longer time increments, compared to a conventional FDLBM, and also use a boundary fitted coordinates system. The jet is chosen long enough in order to guarantee the parabolic velocity profile of the jet at the outlet, and the edge consists of a wedge with an angle of ${\alpha}$ = 23. At a stand-off distance, the edge is inserted along the centerline of the jet, and a sinuous instability wave, with real frequency, is assumed to be created in the vicinity of the nozzle and propagates towards the downstream. We have succeeded in capturing very small pressure fluctuations, resulting from periodical oscillations of a jet around the edge. The pressure fluctuations propagate with the speed of sound. Its interaction with the wedge produces an non-rotational feedback field, which, near the nozzle exit, is a periodic transverse flow, producing the singularities at the nozzle lips.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1915-1920
• /
• 2004

An edge tone is the discrete tone or narrow-band sound produced by an oscillating free shear layer impinging on a rigid surface. In this paper we present a two-dimensional edge tone to predict the frequency characteristics of the discrete oscillations of a jet-edge feedback cycle by the finite difference lattice Boltzmann method. We use a new lattice BGK compressible fluid model that has an additional term and allow larger time increment comparing a conventional FDLB model, and also use a boundary fitted coordinates. The jet is chosen long enough in order to guarantee the parabolic velocity profile of the jet at the outlet, and the edge consists of a wedge with an angle of ${\alpha}=23^{\circ}$ . At a stand-off distance ${\omega}$ , the edge is inserted along the centreline of the jet, and a sinuous instability wave with real frequency f is assumed to be created in the vicinity of the nozzle and to propagate towards the downstream. We have succeeded in capturing very small pressure fluctuations result from periodically oscillation of jet around the edge. That pressure fluctuations propagate with the sound speed. Its interaction with the wedge produces an irrotational feedback field which, near the nozzle exit, is a periodic transverse flow producing the singularities at the nozzle lips.

• 한국진공학회지
• /
• 제22권6호
• /
• pp.291-297
• /
• 2013

Au 촉매를 코팅한 사파이어 기판 상에서 산화아연과 흑연 분말을 혼합한 분말재료를 이용하여 VLS (vapor-liquid-solid) 법으로 산화아연 반도체 나노선을 합성하였다. 제조된 산화아연 나노선은 380 nm에서 근 자외선 영역의 NBE (near-band edge) 발광과 600 nm 부근의 가시광선 영역에서 넓게 퍼져 발광하는 상대적으로 강한 DL (deep level) 발광이 확인되었다($I_{NBE}/I_{DL}$ <1). 산화아연 나노선을 효율적인 단일 파장 자외선 발광체에 적용될 수 있도록 NBE 발광을 극대화함과 동시에 DL 발광을 억제시키기 위하여 본 실험에서는 합성된 산화아연 나노선에 수소 플라즈마 처리를 하였다. 플라즈마 처리시간이 길어짐에 따라(120초 이상) 발광특성의 향상정도는 점차로 감소하였지만, 수소 플라즈마 처리를 통해 나노선 내부에 존재하는 불순물 제어 등으로 다소 짧은 시간의 플라즈마 처리로(90초 이내) DL발광대비 NBE발광의 세기가 약 4배로 향상됨을 확인 하였다($I_{NBE}/I_{DL}$ ~4).