• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.59.1-59.1
• /
• 2013

HBC722 (also known as LkHa 188-G4 and PTF 10qpf; A. Miller et al., 2011) is one of the FU Orionis-like young stellar objects which outbursted in August 2010 (Semkov et al., 2010). We have been monitoring the post-outburst phase of this object since November 2010 with Korean Astronomy and Space Science Institute Near Infrared Camera System (KASINICS), at Bohyunsan Optical Astronomy Observatory (BOAO). Four filters, J, H, Ks, and H2 band, were used for this observation. We did aperture photometry to find photometric variation. The light curve shows a long period brightness change. After decrease of the brightness, which was reported at the KAS 2011 fall meeting, HBC722 brightens up slowly now. However we cannot confirm any short period variations, previously reported by Green et al (2013), due to large scatters in the obtained light curve.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.43.1-43.1
• /
• 2013

We present here the preliminary results of the fast variability of AGN radio light curves. The shortest time scale of minute in AGN light curves is needed to probe the AGN activity for a few reasons; First, to check if there is any kind of shortest time scale activity. Secondly, to find out what high frequency end of AGN spectra look like. For the last, to see the time delay at several wavelength bands and the change of the spectral index with time. The observation was conducted with three KVN(Korea VLBI Network) antennas with single dish cross scan mode. In order not to lose the target at any given time, whenever one station needs to observe the calibrator, the other station is on the target. Though the detailed data reduction is still going on, there might exist varying feature in the radio light curve. The more fine calibration will be done in near future and another good data set is ready for the reduction.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.37.2-37.2
• /
• 2014

Gas in disk galaxies interacts nonlinearly with a underlying stellar spiral potential to form galactic spiral shocks. Numerical simulations typically show that these shocks are unstable to the wiggle instability, forming non-axisymmetric structures with high vorticity. While previous studies suggested that the wiggle instability may arise from the Kelvin-Helmholtz instability or orbit crowding of gas elements near the shock, its physical nature remains uncertain. It was even argued that the wiggle instability is of numerical origin, caused by the inability of a numerical code to resolve a shock that is inclined to numerical grids. In this work, we perform a normal-mode linear stability analysis of galactic spiral shocks as a boundary-value problem. We find that the wiggle instability originates physically from the potential vorticity generation at a distorted shock front. As the gas follows galaxy rotation, it periodically passes through multiple shocks, successively increasing its potential vorticity. This sets up a normal-mode that grows exponentially, with a growth rate comparable to the orbital angular frequency. We show that the results of our linear stability analysis are in good agreement with the those of local hydrodynamic simulations of the wiggle instability.

• Journal of architectural history
• /
• v.23 no.2
• /
• pp.65-80
• /
• 2014

This study was aimed at analyzing the location and the characteristics of the Urban hanok tissues that were formed in the downtown since 1920s. Focusing on the relationship between roads and lots, the developing process and the typological characteristics are examined. Through dividing the large and medium lots of the aristocratic families and on the hilly area near the Seoul City Wall, various shapes of urban hanok tissue were evolved. The urban hanok tissues developed before 1936 locate on the downtown sites, while those developed after 1936 locate on the hilly sites. The location of the tissues were identified in the upper area of Jong-no street. The former is composed of small size lots divided into average area $104.4m^2$ with the narrow alleys of about 2.0m width, while the latter is composed of medium size lots divided into average area $131.54m^2$ with the alleys of about 4.0m width. Moreover the structures of the tissues were evolved based on the developing period and the site condition. Moreover the structures of the tissues were evolved based on the developing period and the site condition. The typological characteristics were defined as the four patterns categorized with the bilateral concepts of alley's form and of alley's spacial feature.

• Journal of Hydrospace Technology
• /
• v.2 no.2
• /
• pp.44-56
• /
• 1996

The effects of the air on the reductions in resistance when supplied under the bottom of a semi-planing ship with a step are investigated in the present study. A 1.275m long FRP model is constructed and the pressure and viscous tangential stresses over the planing surface of the hull with and without air supply are measured through measuring holes carefully selected at the towing tank of Seoul National University. Locations of holes most suitable for air injection are surveyed in front of the planing surface of the model with careful examinations of the limiting streamlines and pressure distributions measured without air supply. At those locations, found to be just front of the step, air has been supplied into a wake region to form an air filled cavity of fixed type. Flow rates and pressure of the supplied air as well as the local pressure and shear stress distributions on the hull surface are measured to understand the physics involved as well as to determine the conditions most effective in resistance reduction at the design speed. It has been found that total resistance of the stepped semi-planing hull can be considerably reduced if an air cavity generated by an adequate air injection at the bottom of the hull near the step. After the cavity optimized at the given speed, air bubbles also have been generated right behind the point where dividing streamlines re-attach to further reduce the frictional resistance but found to be not so effective as the air cavity in resistance reductions.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.165-170
• /
• 2015

We employed the high-pressure high temperature (HPHT) process to enhance the colors of natural sapphires to obtain a vivid blue. First, we analyze the content of the coloring agent $Fe_2O_3$ using the wavelength dispersive X-ray fluorescence (WD-XRF) method. The HPHT procedure operates under 1 GPa at various temperatures of 1700, 1750, and $1800^{\circ}C$ for 5 minutes using a cubic press. We determine the color changes using the optical microscopic images, UV-VIS near-infrared (NIR) spectra, micro-Raman spectra, and Fourier transform-infrared (FT-IR) spectra for all sapphire samples before and after the treatment. The optical microscopic results indicate that the HPHT process can enhance the sapphire color to a vivid blue at temperatures above $1750^{\circ}C$. The UV-VIS-NIR spectra identify the color changes explicitly and quantitatively through providing the Lab color scales and color differences. Both results demonstrate that the colors of natural sapphires can be enhanced to a vivid blue using the HPHT process above $1750^{\circ}C$ under 1 GPa for 5 minutes.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.4
• /
• pp.226-247
• /
• 2009

The competitiveness of the service sector is driven by its productivity. Services innovation is essential to enhancing service productivity. This paper first presents a framework for services innovation. The framework consists of three main phases of a service lifecycle (namely, service development, service operation, and service improvement), which are supported by IT infrastructure and service R&D management functions. This paper then identifies major research issues that should be investigated in the near future. The current issues of three representative service industries (namely, healthcare service, telecommunications service, and financial service) are also discussed.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.141-150
• /
• 2012

The present study examines an efficient congestion management system compatible with the evolving environment. The key is to build an information model shared and exchanged for marketbased solutions to alleviate congestion. Traditional methods for congestion management can be classified into two categories, i.e., the centralized scheme and the decentralized scheme, depending on the extent to which the independent system operator (ISO) is involved in market participants' (MPs) activities. Although the centralized scheme is more appropriate for providing reliable system operation and relieving congestion in near real-time, the decentralized scheme is preferred for supporting efficient market operation. The minimum set of information between the ISO and MPs for decentralized scheme is identified: i) congestion-based zone, ii) Power Transfer Distribution Factors, and iii) transmission congestion cost. The mathematical modeling of the proposed information is expressed, considering its process of making effective use of information. Numerical analysis is conducted to demonstrate both cost minimization from the MP perspective and the reliability enhancement from the ISO perspective based on the proposed information exchange scheme.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.820-828
• /
• 2016

The sizable electrical load of plug-in electric vehicles may cause a severe low-voltage problem in a distribution network. The voltage drop in a distribution network can be mitigated by limiting the power consumption of a charging station. Then, the charging station operator needs a method for appropriately distributing the restricted power to all plug-in electric vehicles. The existing approaches have practical limitation in terms of the availability of future information and the execution time. Therefore, this study suggests a heuristic method based on priority indexes for fairly distributing the constrained power to all plug-in electric vehicles. In the proposed method, PEVs are ranked using the priority index, which is determined in real time, such that a near-optimal solution can be obtained within a short computation time. Simulations demonstrate that the proposed method is effective in implementation, although its performance is slightly worse than that of the optimal case.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.2 no.1
• /
• pp.22-36
• /
• 2016

$^{68}Ga$ is a promising radionuclide for positron emission tomography (PET). It is a generator-produced ($^{68}Ge/^{68}Ga$-generator) radionuclide with a half-life of 68 min. The employment of $^{68}Ga$ for basic research and clinical applications is growing exponentially. Bifunctional chelators (BFCs) that can be efficiently radiolabeled with $^{68}Ga$ to yield complexes with good in vivo stability are needed. Given the practical advantages of $^{68}Ga$ in PET applications, gallium complexes are gaining increasing attention in biomedical imaging. However, new $^{68}Ga$-labeled radiopharmaceuticals that can replace $^{18}F$-labeled agents like [$^{18}F$]fluorodeoxyglucose (FDG) are needed. The majority of $^{68}Ga$-labeled derivatives currently in use consist of peptide agents, but the development of other agents, such as amino acid or nitroimidazole derivatives and glycosylated human serum albumin, is being actively pursued in many laboratories. Thus, the availability of new $^{68}Ga$-labeled radiopharmaceuticals with high impact is expected in the near future. Here, we present an overview of the different new classes of chelators for application in molecular imaging using $^{68}Ga$ PET.