• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3091-3097
• /
• 1994

An expert system for NC part programming of NC lathe (ESPP-1) is developed as a part of Computer-Adied Manufacturing system. Conventional computer-assisted part programming system essentially requires an NC part programmer who is an expert in NC part programming. But the developed ESSP-1 can allow an inexperienced person to make an excellent NC data for the NC Lathe without any problem, since the system has a knowledge base composed of EIA and ISO NC code, feed rate, spindle speed, machining coordinates selection, and tool selection etc., which were directly evoked from some skilled NC part programmers, and referenced some machining handbooks. This paper discusses the algorithm of the expert system for NC part programming of the NC lathe (ESPP-1) and the performance comparisons between the developed expert system and the conventional system.

• Journal of Animal Science and Technology
• /
• v.66 no.1
• /
• pp.93-102
• /
• 2024

This study investigated the effect of dietary supplementation with phytase on growth performance, fecal excretion, and compost nutrition on broilers fed available phosphorus (avP)- and calcium (Ca)-deficient diets. A total of 750 one-day-old broiler chicks were randomly divided into five dietary groups having ten replications in a floor house. Diets of the groups were formulated with positive control (PC), negative control (NC; low avP and Ca), and NC supplemented with phytase levels; 500 (NC500), 1,000 (NC1000), and 1,500 FTU/kg (NC1500). A three-phase feeding program was used in the trial. Average daily gain (ADG) and average daily feed intake (ADFI) in the groups fed diets supplemented with phytase were significantly (p < 0.05) higher than those fed NC and the increase was equivalent to those fed PC. Serum levels of Ca and phosphorus (P) were higher (p < 0.05) in broilers fed NC1000 and NC1500 than in those fed NC. Interleukin (IL) level was the lowest in the group fed NC. Plasma myo-inositol (INS) concentrations in the NC1500 group were higher (p < 0.05) than PC, NC, and NC500 groups. Crude protein (CP) excretion was notably (p < 0.05) lower in the NC1500 group than in PC and NC groups. A lower (p < 0.05) concentration of P₂O₅ was observed in compost from the group fed NC1500 than the groups fed PC and NC. Accordingly, we suggest that phytase supplementation in lower avP and Ca levels of broiler diet can improve their productive performance and reduce environmental pollution.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.1113-1115
• /
• 2013

NC 포스트프로세서는 CAD/CAM시스템에서 생성된 공구경로데이터 파일을 입력받아 NC공작기계를 구동시킬 수 있는 공작기계 제어데이터 파일로 변환해 주는 소프트웨어이다. 본 논문에서는 범용 NC 포스트프로세서를 웹에서 실행될 수 있도록 구현한 내용을 기술하고 있다. 사용자가 웹에 접속하여 NC 콘트롤러의 사양 및 매개변수를 설정해주면 절단에 사용할 NC파일이 자동 생성된다. 개발된 본 시스템을 사용하면 고가의 전용 NC 포스트포로세서 구입에 소요되는 비용을 줄일 있어 생산성 향상에 기여할 수 있다.

• Journal of the KSME
• /
• v.32 no.6
• /
• pp.554-562
• /
• 1992

수치제어(NC : numerical control) 기술은 공장자동화를 위한 중요 기술이다. 우리 산업현장에 공장 자동화가 확장되면서 NC 공작기계, 산업용 로봇, 삼차원 좌표측정기 등의 사용이 매우 증 가되고 있다. 이러한 수치제어용 기계에서는 자동 위치제어를 위하여 길이변위와 회전각도 감 지용 센서인 NC 엔코더가 매우 중요한 부품이다. NC 엔코더에는 선형 엔코더(NC-스케일)와 회전 엔코더가 있으며, 각각 직선운동과 회전운동을 제어하기 위해서 필요한 자동화 부품이다. 그림 1에서는 CNC 위치제어 시스템에서 정확한 위치로 이동을 목표로하여 서보 제어할 때 기 계축의 위치를 감지하는 센서가 NC 엔코더임을 보여주고 있다. 선형 엔코더는 직선운동의 변 위를 감지하며 NC-스케일 이라고도 말한다. 우리나라에서는 아직 엔코더 제작기술을 개발하지 못하여 전량수입에 의존하고 있다. 이러한 NC 엔코더의 수요는 해외 시장뿐만 아니라 국내시 장에서도 급격히 증가되고 있으며 국산화 개발이 시급하다. 이 글에서는 엔코더의 종류별 작동 원리를 설명하고 또한 NC-스케일 제조기술을 개발하기 위하여 실험하였던 결과를 정리하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1542-1551
• /
• 1990

This paper shown how to measure the machining error in diameter of cylindrical workpiece and compensate the measured machining error in NC turning. Machining error is measured by the electric micrometer mounted on the tool post with the NC part program for probe location path analyzed. Correct NC part program for finish turning is automatically generated to compensate the measured machining error. These concepts have been effectively introduced to a newly developed software for error compensation. In turning experiments with the developed error compensation system, machining error was almost within the specified tolerance, which reveals the effectiveness of the developed system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.591-594
• /
• 2002

Generating NC-code from 3D part model needs a lot of effort to make many decisions, including machining area, tool change data, tool data, cutting condition, etc., by using either manual or computer aided method. This effort can be reduced by integration of automated process planning and NC-code generation. In case of generating NC code with a help of the process planning system, many data mentioned from the process planning can be used. It means that we can create NC-code about a full part. In this study, integration of FAPPS(Feature based Automatic Process Planning) with a NC-code generating module is described and additional data to adapt NC-code for machine shop is discussed.

• Genomics & Informatics
• /
• v.13 no.2
• /
• pp.26-30
• /
• 2015

nc886 (=vtRNA2-1, pre-miR-886, or CBL3) is a newly identified non-coding RNA (ncRNA) that represses the activity of protein kinase R (PKR). nc886 is transcribed by RNA polymerase III (Pol III) and is intriguingly the first case of a Pol III gene whose expression is silenced by CpG DNA hypermethylation in several types of cancer. PKR is a sensor protein that recognizes evading viruses and induces apoptosis to eliminate infected cells. Like viral infection, nc886 silencing activates PKR and induces apoptosis. Thus, the significance of the nc886:PKR pathway in cancer is to sense and eliminate pre-malignant cells, which is analogous to PKR's role in cellular innate immunity. Beyond this tumor sensing role, nc886 plays a putative tumor suppressor role as supported by experimental evidence. Collectively, nc886 provides a novel example how epigenetic silencing of a ncRNA contributes to tumorigenesis by controlling the activity of its protein ligand.

• Molecules and Cells
• /
• v.42 no.5
• /
• pp.379-385
• /
• 2019

Non-coding RNAs (ncRNAs) comprise various RNA species, including small ncRNAs and long ncRNAs (lncRNAs). ncRNAs regulate various cellular processes, including transcription and translation of target messenger RNAs. Recent studies also indicate that ncRNAs affect organismal aging and conversely aging influences ncRNA levels. In this review, we discuss our current understanding of the roles of ncRNAs in aging and longevity, focusing on recent advances using the roundworm Caenorhabditis elegans. Expression of various ncRNAs, including microRNA (miRNA), tRNA-derived small RNA (tsRNA), ribosomal RNA (rRNA), PIWI-interacting RNA (piRNA), circular RNA (circRNA), and lncRNA, is altered during aging in C. elegans. Genetic modulation of specific ncRNAs affects longevity and aging rates by modulating established aging-regulating protein factors. Because many aging-regulating mechanisms in C. elegans are evolutionarily conserved, these studies will provide key information regarding how ncRNAs modulate aging and lifespan in complex organisms, including mammals.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.99-108
• /
• 2006

Since mold industries are regarded as belonging to three types of bad business, capable young people are reluctant to work in this field. The industries are hard to employ skilled workers who have much experience and knowledge On the mold manufacturing. Thus, effective CAM systems are required for unskilled workers to create process plans and NC data for the manufacturing, and process plans play important roles in the downstream manufacturing processes, such as NC machining, polishing, and final assembly. This study proposes a decision support system that facilitates unskilled workers to easily select high quality NC-data, as well as to increase productivity. The proposed system is assumed to follow a CAM operation scenario that consists of next three steps: 1) identifying several process plans and enumerating feasible unit machining operations (UMOs) from material and part surface information, 2) creating all feasible NC-data based on UMOs using a commercial CAM system, 3) selecting the best NC data among the feasible NC data using four screening criteria, such as machining accuracy, machining allowance, cutting load, and processing time. A case study on the machining of a camera core mold is provided to demonstrate the proposed system.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.1
• /
• pp.65-69
• /
• 1989

This study was conducted to obtain the breeding Information for varietal difference of leaf breakdown of flue-cured tobacco at Taegu Experiment Station, Korea Ginseng & Tobacco Research Institute In 1988. The experiment was designed in randomized block with 3 replications. And data were analyzed as spilt plot design composed with varieties for main and growth stages for sub-plots. Among the 8 varieties (NC 95, SL 72, Sleight G-28, TC 518, NC82, NC 2326, NC 567 and TC 499), first half derived from NC 95, and 4 latter varieties were used for check Plants and not derived from NC 95. Plant seedlings were transplanted in 15 April. The number of breakdown leaf were investigated twice at peak growth stage, 5 June and at early harvest stage, 30 June. NC 95 and varieties derived from NC 95 had showed significantly different on the number of breakdown leaf compared to the latter 4 ones after heavy rainfall, but there were not significantly different at the two growth stages. It was suggested that NC95 and varieties derived from NC 95 had substance to induce leaf breakdown by conditional genes after water absorption to plant tissue. Among the varieties derived from NC 95 cultivar SC 72, Speight G-28 and TC 518 had appeared significantly different on the number of breakdown leaf, respectively. These results could appreciated analogically that character of leaf breakdown were governed by heteromeric genes In NC 95.