• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.987-990
• /
• 1999

본 연구에서는 $BaTiO_3$를 기본 조성으로 하여 PTC 써미스터를 제조하였으며 여기에 첨가제로서 Ca, Mn, Nb의 양을 순차적으로 변화시켜 미세구조 및 전기적 특성을 연구하였다. 또한 복소 임피던스 측정을 통해서 PTC 효과에 미치는 주 저항 성분에 대해서 고찰하였다. Ca 첨가 실험에서는 5[mol%] 첨가된 시편에서 $2.3{\times}10^7[\Omega{\cdot}cm]$의 높은 peak 비저항이 나왔으며 Mn과 Nb에서는 각각 0.1[mol%], 0.2[mol%]에서 $1.5{\times}10^8[\Omega{\cdot}cm]$와 $3.71{\times}10^9[\Omega{\cdot}cm]$의 수치가 측정되었다. 또한 Nb 첨가 실험에서는 첨가량이 증가할수록 결정립의 크기가 조밀해지는 현상을 보였다. PTC 효과에 미치는 주 저항 요소에 대해서 관찰한 복소 임피던스 측정에서는 결정립계 저항 성분이 주가 됨을 확인 하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.158-164
• /
• 1995

Solid solutions Sr$_{2}$(Ta$_{1-x}$ Nb$_{x}$)$_{2}$O$_{7}$, (x=0.0-1.0), composed of strontium tantalate(Tc=-107.deg. C) and strontium-niobate(Tc=1342.deg. C) were prepared by the conventional mixed oxide method and the flux method(molten salt synthesis method). Phase relation, sintering temperature, grain-orientation and dielectric properties for sintered ceramic samples were investigated with different compositions. Both Curie temperature and dielectric constant at Curie temperature were increased, and sintering behavior and the degree of grain-orientation were improved with the increase of Nb content. The single phase Sr$_{2}$(Ta/sib 1-x/Nb$_{x}$)$_{2}$O$_{7}$ powder was synthesized by using the flux method at lower temperatures, and sintering temperature was also reduced by using the flux method-derived powder than using the mixed oxide-derived powder. Sintering characteristics and dielectric properties of the specimens prepared by the flux method were better than those derived through the conventional mixed oxide method.thod.hod.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.98-102
• /
• 2003

$Ba_2NaNb_5O_{15}$, hereafter BNN, thin films are attractive candidates for nonvolatile memory and electro-optic devices. In the present work, thin films that have different contents of Ba, Na and Nb have been prepared by H-MOD technique on silicon and Pt substrates. XRD and SEM were used to investigate the phase evolution behavior and the microstructure of the films. It was found that the films of about 450nm thick were crack-free and uniform in microstructure. Nb content strongly influenced the phase formation of the films, where low temperature phase was always formed at the stoichiometric BNN composition. However, the amount of low temperature phase decreased with the increase of excess Nb content, and the single phase (orthorhombic tungsten bronze structure) BNN thin film was obtained at the temperature as low as $750^{\circ}C$ for samples with excess niobium. From this study, the sub-solidus phase diagram below $850^{\circ}C$ for $BaO-Na_2O-Nb_2O_5$ ternary system is proposed.

• 한국결정학회지
• /
• 제13권3_4호
• /
• pp.172-176
• /
• 2002

Pb(Mg /sub 1/3/Nb/sub 2/3/)O₃-PbTiO₃ 계 완화형 강유전체에서 PbTiO₃ 첨가량 변화 및 온도 변화에 따른 상전이 거동을 초전특성 및 유전완화현상 고찰을 통해 고찰하였다. -40∼200℃의 상전이 온도범위에 걸쳐 초전 및 유전특성을 살펴보았으며 특히 Vogel-Fulcher 관계식에 의한 freezing temperature를 도출하였다. 이러한 모든 실험적 결과들로부터 기존에 제안되었던 Pb(Mg /sub 1/3/Nb/sub 2/3/)O₃-PbTiO₃ 고용체 시스템에 대한 상평형도를 다소 수정하여 제안하였다.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.903-910
• /
• 1998

Ti:LiNbO$_3$ optical waveguides have been fabricated by Ti-diffusion in wet oxygen atmosphere. The fabrication conditions of furnace temperature, diffusion time and bubbler temperature were 105$0^{\circ}C$, 8 hours and 9$0^{\circ}C$, respectively and Ti thickness was varied from 700$\AA$ to 1500$\AA$. In this paper, the nearfield patterns, mode sizes (hirizontal/vertical) and insertion loss of waveguides were discussed at wavelength 1550 nm ad function of Ti thickness. With the planar waveguide, the effective index change and diffusion depth were calculated at 632.8nm using the prism coupling method. From these results, the best Ti thickness in our conditions seems like to by 1200$\AA$~1300$\AA$.

• 한국전기전자재료학회논문지
• /
• 제21권11호
• /
• pp.1000-1004
• /
• 2008

In this paper, the influences of poling electric field on piezoelectric properties of $0.95(K_{0.5}Na_{0.5})NbO_3$-$0.05Li(Sb_{0.8}Nb_{0.2})O_3$ (abbreviated as KNN-LSN) ceramics were investigated. The specimens was sintered at sintering temperature of $1050^{\circ}C$. They showed orthorhombic phase structure without secondary phase. Electromechanical coupling factor (kp), dielectric and piezoelectric constant($d_{33}$) increased with poling electric field. However, mechanical quality factor (Qm) decreased. Take into account of poling conditions and piezoelectric properties of KNN-LSN ceramics, the optimum poling condition for KNN-LSN ceramics was poling electric field of 4.5 kV/mm. At the time, kp of 0.458, Qm of 43.97, $d_{33}$ of 278 pC/N, and dielectric constant of 1079 were shown, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.21-24
• /
• 1997

Ferroeletric LiNbO$_3$ thin films hale been prepared directly on Si(100) substrates by conventional RF magnetron spurttering system for nonvolatile memory applications. As-deposited films were performed RTA(Rapid Thermal Annealing) treatment in an oxygen atmosphere at 600 $^{\circ}C$ for 60 s. The rapid thermal annealed films were changed to poly-crystalline ferroelectric nature from amorphous of as-deposition. The resistivity of the ferroelectric LiNbO$_3$ film was increased from a typical vague of 1~2$\times$10$^{8}$ $\Omega$.cm before the annealing to about 1$\times$10$^{13}$ $\Omega$.cm at 500 kV/cm and reduce the interface state density of the LiNbO$_3$/Si(100) interface to about 1$\times$10$^{11}$ cm$^2$ . eV. Ferroelectric hysteresis measurements using a Sawyer-Tower circuit yielded remanent polarization (Pr) and coercive field (Ec) values of about 1.2 $\mu$C/cm$^2$ and 120 kV/cm, respectively.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.112-112
• /
• 2015

The purposed of this work was to determine nanotube shape variation on the Ti-xNb alloys with alloying elements and applied potentials. Samples were prepared by arc melting, followed by followed by homogenization for 12 hr at $1000^{\circ}C$ in argon atmosphere. This study was evaluated the phase and microstructure of Ti-xNb alloys using an X-ray diffraction (XRD) and optical microscopy (OM). The morphology of the samples was investigated with a field-emission scanning electron microscope (FE-SEM) and energy dispersive X-ray spectroscopy (EDS). The nanotube on the alloy surface was formed in 1 M $H_3PO_4$ with small additions of NaF 0.8 wt.%. All anodization treatments were carried out using a scanning potentiostat (Model 362, EG&G, USA) at constant voltage 30 V for 120 min, respectively. The morphology of the samples was investigated with a field-emission scanning electron microscope (FE-SEM) and energy dispersive X-ray spectroscopy (EDS). Surface characteristics of nanotbue formed on Ti-xNb alloys was investigated by potentiodynamic test and potentiostatic in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. It was observed that the changed ${\alpha}$ phase to ${\beta}$ phase with Nb content.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.333-333
• /
• 2012

In this study, we investigated morphology of nanotube and micropore on the Ti-25Nb-xHf alloys with Hf contents after anodization. Ti-25Nb-xHf ternary alloys contained from (0~15) wt.% Hf contents were manufactured by vacuum arc-melting furnace. The obtained ingots were homogenized in an argon atmosphere at $1000^{\circ}C$ for 12h and then water quenching. The specimens were cut from ingots to 3mm thickness and first ground and polished using SiC paper (grades from 100 to 2000). 2steps anodization treatments on Ti-25Nb-xHf alloys were carried out at room temperature for experiments. Micro-pore formation was performed in Ca+P mixed solution at 265V for 3min. After that, nanotube formation was in 1M $H_3PO_4$ electrolytes containing 0.8wt.% NaF solutionat 10V for 120min. Morphologies of micropore and nanotube depended on the Hf content in Ti-25Nb-xZr ternary system.

• 대한치과보철학회지
• /
• 제49권1호
• /
• pp.16-21
• /
• 2011

연구 목적: 높은 외력이 작용하는 부위의 임플란트 재료로서 사용되고 있는 Ti-6Al-7Nb 합금의 골유착을 개선하기 위한 방법의 하나로서 나노튜브 $TiO_2$ 층 생성하고 전석회화 처리한 다음 유사체액 중에서의 활성도를 알아보고자 하였다. 연구 재료 및 방법: 양극산화처리는 glycerol에 20 wt% $H_2O$와 1 wt% $NH_4F$를 혼합하여 준비한 전해질 수용액에 전압 20 V, 전류밀도 20 mA/$cm^2$의 조건에서 1시간동안 통전하였다. 전석회화처리는 $80^{\circ}C$의 $Na_2HPO_4$ 수용액에 30분 동안 침적하고, 이어서$100^{\circ}C$의 $Ca(OH)_2$ 포화 수용액에 30분 동안 침적하였으며, $500^{\circ}C$에서 2시간 동안 열처리하였다. 전석회화처리 후 표면층의 생체활성도를 조사하기 위해 $36.5^{\circ}C$, pH 7.4의 유사체액에 10일 동안 침적하였다. 결과: 1. 나노튜브 $TiO_2$ 층은 높은 자기정렬 형태를 갖고 큰 직경의 튜브들 사이 공간에 상대적으로 작은 직경의 튜브들이 생성되는 형태로 치밀한 구조를 이루었으며, 상부에서 하부로 갈수록 직경 감소를 보였다. 2.1 wt% $NH_4F$와 20 wt% $H_2O$를 함유하는 glycerol 전해액에서 20V의 전압을 인가하여 생성된 나노튜브들의 평균 길이는 $517.0{\pm}23.2\;nm$를 보였다. 3. 나노튜브 $TiO_2$ 층의 생체활성도는 $80^{\circ}C$의 0.5 M$Na_2HPO_4$ 수용액과 $100^{\circ}C$의 $Ca(OH)_2$ 포화 수용액에 침적하는 전석회화처리 군의 경우에 크게 개선되어, 아파타이트의 석출 과정에서 나타나는 치밀한 돌기상과 이들을 가로지르는 미세 균열상이 관찰되었다. 결론: Ti-6Al-7Nb 합금을 나노튜브 $TiO_2$ 층 생성 후 전석회화 처리한 결과 생체활성도가 개선되었다.