• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.260-260
• /
• 2007

강유전성 세라믹스 재료로써는 PZT계열의 세라믹재료가 널리 쓰이고 있다. 이는 우수한 유전 및 압전특성을 가지고 있으나, PbO을 다량 함유하고 있어 $1000^{\circ}C$이상에서 PbO가 급격하게 휘발되는 성질에 따라서 조성의 변동이 생겨 재현성이 어려우며 이를 방지하기 위하여 과잉 PbO를 첨가시키기 때문에 PbO휘발로 인한 강한 독성이 인체에 유해하다. 최근에는 Pb의 환경문제가 대두됨에 따라 이를 대체할 다른 물질의 개발이 활발하게 연구되고 있다. 대표적인 비납계 강유전 세라믹스인 $(Na_{0.5}K_{0.5})NbO_3$ ($d_{33}$ = 120 pC/N, Kp = 39%, Qm = 210, 이하 NKN라 표기) 조성은 $KNbO_3,\;NaNbO_3$ 상태도에 따라 순수한 NKN 세라믹스는 $1140^{\circ}C$에서 안정상을 가지나, 높은 온도로 인하여$Na_2O$와 $K_2O$가 쉽게 휘발됨에 따라 화학량 비의 변화가 생겨 이차 상을 형성하기도 한다. 따라서 본 연구에서는 $LiNbO_3$의 새로운 고용체를 추가시켜 기본 NKN조성에 압전성 및 고온에서의 상안정성을 향상시키고자 하였다. 최적 조성을 설계하기 위하여 (1-x)$(Na_{0.5}K_{0.5})NbO_3-xLiNbO_3$, x=(0,0.02,0.04,0.06,0.08)의 범위에서 조성을 변화시키면서 실험하였다. 시편 제작은 일반적인 세라믹스 소결 공정을 적용하였는데, $850^{\circ}C$에서 5시간 하소 후 $1080^{\circ}C$에서 2시간 소결하였다. 하소 및 소결 후에는 XRD분석을 통해 perovskite구조를 확인하였고, 미세구조 확인을 위해 주사전자현미경 (SEM)으로 관찰하였다. 압전특성을 평가하기 위해 압전 $d_{33}$-meter를 사용하였으며, impedance analyzer (HP 4194A)를 이용하여 전기적 특성을 측정하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1053-1055
• /
• 2002

Recently CRT is getting large-sized, Flatness and High Fine Pitched in the meantime the raw material for shadow mask is in rapid progress of thinness, Low Thermal Expansion and high strength.Until now we have used AK(Aluminum Killed) & Invar(Fe-Ni alloy) materials for main raw material of shadow mask component. However recently Nb and Co addition and Nb+Co addition, which has advantage of Low Thermal Expansion and High Strength. has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. Among of them, Co addition has been mass production as forming type (Flat CRT) with the beneficial effect of low thermal expansion & high strength for the first time. Since then Nb+Co addition has been used in mass production by the request of much higher strength of shadow mask component. In case of Nb addition, It's thermal expansion coefficient is a little lower than normal Invar and a little higher than Co addition, meanwhile Its Mechanical property is almost similar to Co Addition. The used samples of this experiment are 36%Ni + Fe, 32%Ni + 5%Co + Fe, 32%Ni + 5%Co + 0.3%Nb + Fe, 32%Ni + 0.3%Nb + Fe with heat treatment temperature of 600$^{\circ}C$, 650$^{\circ}C$, 700$^{\circ}C$, 750$^{\circ}C$, 800$^{\circ}C$, 850$^{\circ}C$, 900$^{\circ}C$ respectively under the condition of 15min holding time. After heat treatment, we have observed the change of mechanical property with addition of small elements through mechanical property investigation and metal structure observation as well as transition of thermal expansion coefficient by measuring of thermal expansion coefficient at 850$^{\circ}C$. In conclusion, 5%Co addition indicates that its thermal expansion coefficient is very similar under the condition of at 850$^{\circ}C$ for 15min 's heat treatment. From the experimental result it is suggested that Co addition is mostly suitable for Doming property and Nb addition is mostly suitable for Drop property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.402-405
• /
• 2001

The BaTiO$_3$+10wt%Nb$_2$O$_{5}$ ceramics were prepared by conventional mixed oxide method. The structural and dielectric properties of the BaTiO$_3$+10wt%Nb$_2$O$_{5}$ ceramics with the sintering temperature were investigated. Increasing the sintering temperature, the 2$\theta$ value of BaTiO$_3$peaks were shifted to the higher degree and intensity of the BaTiO$_3$and BaNbO$_3$peaks were increased. In the BaTiO$_3$+10wt%Nb$_2$O$_{5}$ ceramics sintered at 135$0^{\circ}C$ and 1375$^{\circ}C$, the grain was fine and uniform. Increasing the sintering temperature, the pore was decreased and the dielectric constant was increased. In the BaTiO$_3$+10wt%Nb$_2$O$_{5}$ ceramics sintered at 1375$^{\circ}C$, the dielectric constant and dielectric loss were 5424, 0.02 respectively.ctively.

• Applied Science and Convergence Technology
• /
• v.26 no.5
• /
• pp.143-147
• /
• 2017

Structural studies on the addition characteristics of Nb ions to $BaTiO_3$ solid solutions were performed by XRD and SEM/EDS technique. The X-ray diffraction peaks of the (111), (200) and (002) planes of Nb-doped $BaTiO_3$ solid solutions with different mole% of Nb were analyzed. We also investigated the relationship between the dielectric and structural properties of Nb-doped $BaTiO_3$. The transition temperatures of $BaTiO_3$ solid solution doped with 0.5mole%Nb and 1.0 mole%Nb were ${\sim}116^{\circ}C$ and ${\sim}87^{\circ}C$, respectively, which were found to be shifted to very low temperature from the transition temperature of pure $BaTiO_3$ (about $125^{\circ}C$). As a result of analysis of 1/K versus T and ln[$(1/K)-(1/K_m)$ versus ($T-T_m$)] of the two compositions used in this experiment, the diffusivity slightly differs from that of pure $BaTiO_3$ at temperatures above Curie temperature. And this characteristic was analyzed by applying the modified Curie-Weiss law.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.2
• /
• pp.106-110
• /
• 1998

The $LiNbO_3$ thin films were prepared directly on Si(100) substrates by conventional RF magnetron spurttering system for nonvolatile memory applications. RTA(Rapid Thermal Annealing) treatment was performed for as-deposited films in an oxygen atmosphere at 600 $^{\circ}C$ for 60 s. The rapid thermal annealed films were changed to poly-crystalline ferroelectric nature from amorphous of as-deposition. The resistivity of the ferroelectric $LiNbO_3$ film was increased from a typical value of $1{\sim}2{\times}10^8{\Omega}{\cdot}cm$ before the annealing to about $1{\times}10^{13}{\Omega}{\cdot}cm$ at 500 kV/cm and reduced the interface state density of the $LiNbO_3/Si$ (100) interface to about $1{\times}10^{11}/cm^2{\cdot}eV$. Ferroelectric hysteresis measurements using a Sawyer-Tower circuit yielded remanent polarization ($P_r$) and coercive field ($E_c$) values of about 1.2 ${\mu}C/cm^2$ and 120 kV/cm, respectively.

• Korean Journal of Materials Research
• /
• v.7 no.7
• /
• pp.587-591
• /
• 1997

RBS와 XRD를 이용하여 C o-Nb이중층 실리사이드와 구리 배선층간의 열적안정성에 관하여 조사하였다. Cu$_{3}$Si등의 구리 실리사이드는 열처리시 40$0^{\circ}C$정도에서 처음 형성되기 시작하였는데, 이 때 형성되는 구리 실리사이드는 기판의 상부에 존재하던 준안정한 CoSi의 분해시에 발생한 Si원자와의 반응에 의한 것이다. 한편, $600^{\circ}C$에서의 열처리 후에는 CoSi$_{2}$층을 확산.통과한 Cu원자와 기판 Si와의 반응에 의하여 CoSi$_{2}$/Si계면에도 구리 실리사이드가 성장하였는데, 이렇게 구리 실리사이드가 CoSi$_{2}$/Si 계면에 형성되는 것은 Cu원자의 확산속도가 여러 중간층에서 Si 원자의 확산속도 보다 더 빠르기 때문이다. 열처리 결과 최종적으로 얻어진 층구조는 CuNbO$_{3}$/Cu$_{3}$Si/Co-Nb합금층/Nb$_{2}$O$_{5}$CoSi$_{2}$/Cu$_{3}$Si/Si이었다. 여기서 상부에 형성된 CuNbO$_{3}$는 Cu원자가 Nb$_{2}$O$_{5}$및 Co-Nb합금층과 반응하여 기지조직의 입계에 석출되어 형성된 것이다.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.185-217
• /
• 1996

Pb(Mg1/3Nb2/3)O3은 높은 유전율과 전기저항 및 유전율의 온도변화율이 적은 Pb계 relaxor의 대표적인 재료로서 적층 세라믹 콘덴서 재료에의 응용이 크게 기대되고 있다. 그러나 산화물 분말을 이용하는 일반적인 세라믹스 합성방법으로는 Pb(Mg1/3Nb2/3)O3의 단일상의 합성이 어렵고, 합성과정에서 저유전율상인 pyrochlore상이 합성이 어렵고, 합성과정에서 저유전율상인 pyrochlore상이 공존하여 Pb(Mg1/3Nb2/3)O3의 전기적 특성을 저하시킨다. 본연구에서는 용액을 이용하여 Pb(Mg1/3Nb2/3)O3의 단일상을 합성하고자 하였다. 출발물질로는 값싼 금속염인 Niobium Oxalate, magnesium Nitrate 및 Lead Nitrate를 선정하고 증류수에 용해하여 혼합용액을 제좋고, 합성방법으로는 초음파 분무 열분해법과 에멀젼법을 이용하였다. 초음파 분무 열분해법에서는 75$0^{\circ}C$에서 합성한 분말을 다시 75$0^{\circ}C$에서 하소하여 Pb(Mg1/3Nb2/3)O3 단일상을 합성할 수 있었으며, 에멀젼법에서는 80$0^{\circ}C$에서 Pb(Mg1/3Nb2/3)O3 단일상을 합성할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.390-390
• /
• 2010

Superconducting proximity effects of Nb/Si(111) were investigated with scanning tunneling microscopy(STM) and scanning tunneling spectroscopy(STS). A highly-doped($0.002\;{\omega}{\diamondsuit}cm$) Si wafer pieces were used as substrate and Nb source was thermally evaporated onto the atomically clean silicon substrate. The temperature of the silicon sample was held at $600^{\circ}C$ during the niobium deposition. And the sample was annealed at $600^{\circ}C$ for 30 minutes additionally. Volmer-Weber growth mode is preferred in Nb/Si(111) at the sample temperature of $600^{\circ}C$. With proper temperature and annealing time, we can obtain Nb islands of lateral size larger than Nb coherence length(~38nm). And outside of the islands, bare Si($7{\times}7$) reconstructed surface is exposed due to the Volmer-Weber Growth mode. STS measurement at 5.6K showed that Nb island have BCS-like superconducting gap of about 2mV around the Fermi level and the critical temperature is calculated to be as low as 6.1K, which is lower than that of bulk niobium, 9.5K. This reduced value of superconducting energy gap indicates suppression of superconductivity in nanostructures. Moreover, the superconducting state is extended out of the Nb island, over to bare Si surface, due to the superconducting proximity effect. Spatially-resolved scanning tunneling spectroscopy(SR-STS) data taken over the inside and outside of the niobium island shows gradually reduced superconducting gap.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.295-304
• /
• 1995

Stabilization of the perovskite phase and sequence of reactions occuring during calcination were studied with solid solutions formed between Pb(Zn1/3Nb2/3)O3 and Pb(Fe1/2Nb1/2)O3. In the PZN-PFN composition of equal molar ratio, rhombohedral type pyrochlore phase (Pb2Nb2O7) and PbO-rich distorted cubic type pyrochlore phase (Pb3Nb2O8) were coexisted as intermediate phases at temperatures below 85$0^{\circ}C$, and these phases transformed to a stable cubic type pyrochlore phase, Pb3Nb4O13 solid solution and a perovskite solid solution at temperatures above 85$0^{\circ}C$. The major stable phase as increasing sintering temperatures was a perovskite phase in this binary system and prominent suppression of the pyrochlore phase was achieved by substituting Zn2+ with Fe3+ or by increasing sintering temperature. The composition containing 20mol% PZN possessed the best dielectric properties, and the dissipation factor was lower than 5% in all compositions.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.10-12
• /
• 2002

Single Josephson junctions of 50 $\mu$m $\times$ 50 $\mu$m were fabricated for several oxidation conditions to investigate controllabilities of critical current density ($J_{c}$) with the standard KRISS processes. Considering the self-field effect suppressing the observed critical current ($I_{c}$) at high $J_{c}$ region, we could reasonably estimate $J_{c}$ values from I-V observations. The dependence of the estimated $J_{c}$ as a function of exposure, which is equal to pressure(P) times time(t), was well fitted to a curve of $J_{c}$ ~ $(Pt)^{-0.36}$. The maximum $J_{c}$ value at the controllability margin was found to be 4 kA/$cm^{2}$ with the current equipment set up.