• 한국광학회지
• /
• 제4권1호
• /
• pp.108-113
• /
• 1993

본 논문에서는 Fe를 내부확산하여 도우핑한 $Fe:LiNbO_3$ 광도파로의 광굴절 특성을 연구하였다. 먼저 $Fe:LiNbO_3$의 광굴절 특성을 Fe를 도우핑하지 않은 $LiNbO_3$ 와 비교하여 Fe를 도우핑하였을 때 회절효율과 감도가 향상되는 것을 확인하였다. 또한 분위기 가스를 달리하여 내부확산한 시료의 경우, 순수 아르곤 가스에서 내부확산한 $Fe:LiNbO_3$ 광도파로의 회절효율 및 감도가 가장 크며, 감쇠시간은 가장 짧은 결과를 얻었다. 따라서 Fe 내부확산시 아르곤 가스를 분위기 가스로 사용하는 것이 광굴절 효과를 이용한 광스위치의 좋은 특성을 얻을 수 있다.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.435-438
• /
• 2012

As lead-free piezoelectric materials, $Ag_2O$ doped $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3+x$ mol% (where x = 0, 0.5, 1, 1.5, 2, 2.5 and 3, respectively) ceramics were fabricated by a conventional sintering process. The doping effects on the microstructure and electrical properties of the $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3$ ceramics were systematically investigated. When the 3 mol % $Ag_2O$ doped $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3$ samples were sintered at $1,080^{\circ}C$ for 5 hrs in air, these ceramics showed excellent values of density=4.20 $g/cm^3$, piezoelectric constant ($d_{33}$)=174 pC/N and phase transition temperature$(T_c)=421.6^{\circ}C$, respectively.

• 센서학회지
• /
• 제13권2호
• /
• pp.152-156
• /
• 2004

The dielectric and piezoelectric properties of 0.36Pb($Sc_{1/2}Nb_{1/2}$)$O_{3}$-0.25Pb($Ni_{1/3}Nb_{2/3}$)$O_{3}$-0.39Pb$TiO_{3}$ (hereafter PSNNT) at the morphotropic phase boundary (MPB) composition were investigated with $0{\sim}2.5$ mot% $MnO_{2}$ doping. Bulk density, dielectric loss and tetragonality of crystal structure were all improved with increasing $MnO_{2}$ additive content. With increasing $MnO_{2}$ additive content, the electromechanical coupling factor and quality factor were also increased: Electromechanical coupling $k_{p}$ and quality factor $Q_{m}$ at 2.0 mol% $MnO_{2}$ doping with were showed highest values of 55.6 % and 252, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.245-251
• /
• 2017

Niobium doped zirconium oxide (Nb-Zr-O:NZO) thin films were fabricated on Si substrates by a sol-gel technique with an annealing temperatures of $500{\sim}1000^{\circ}C$ in air ($N_2:O_2=3:1$) for 20 minutes. It was found that the NZO film is based on tetragonal $ZrO_2$ polycrystalline structure with the Nb 5+ ion state and there is almost no diffusion of Nb or Zr to Si substrate. The relative dielectric constant for the NZO film with the Nb composition of 30 mol% and annealed at $800^{\circ}C$ was around 40. The root mean roughness was 1.02 nm. In addition, the leakage current of NZO films was as low as $10^{-6}A/cm^2$ at 4.4 V.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1335-1341
• /
• 1999

The electrical conductivity ($\sigma$) of TiO2 doped with 0.05-4.0mol% Nb2O5 was measured in the oxygen partial pressure range of 10-17 to 100 atm and temperature range of 1100 to 130$0^{\circ}C$ to investigate the electrical properties and defect types. The oxygen partial pressure dependence of the electrical conductivity (log$\sigma$/logPo2) above 110$0^{\circ}C$ was divided into the four regions. From these experimental results the following defect regions were proposed ; 1) Magneli phase(extended defect) 2) reduced rutile region where intrinsic defect predominates 3) nearly stoichiometric region which is independent on the oxygen partical pressure and 4) overstoichiometric region which is not observed in pure TiO2 The electrical conductivity of Nb-doped TiO2 depended on the doping content the oxygen partial pressure and the measuring tem-perature.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.156-156
• /
• 2000

The piezoelectric properties and the doping effect for $0.95Pb(Zr_xTi_{l-x})O_3+0.O5Pb(Mn_{1/3}Nb_{2/3})O_3$compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the value of $k_p$ and ${\varepsilon}_{33}^T$ were maximized, but $Q_m$ was minimized $(k_p=0.57, Q_m=1550)$ in the composition of x=0.51. In order to increase the values of $Q_m$, $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of $k_p$ decreased, and the values of $Q_m$ increased with doping concentration of $Nb_2O_5$ . As a experiment results under high electric field driving, when vibration velocity was ower than 0.6[m/s], the temperature increase was 20[℃], and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.132.1-132.1
• /
• 2000

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.235-239
• /
• 2006

Micro-pulling down$({\mu}-PD)$법을 이용하여 직경 $0.8{\sim}1.0mm$, 길이 $30{\sim}35mm$의 ZnO가 첨가된 near-stoichiometric $LiNbO_3$, 단결정을 성장하였다. 성장된 결정의 결정구조를 powder x-tay diffraction(XRD) patterns으로 확인하였고, electron probe micro analysis(EPMA)를 이용하여 결정내 Zn 이온들이 균일하게 분포되었음을 확인하였다. 또한 2 mol% 이상의 ZnO 첨가시 $OH^-$ 흡수밴드의 특성이 크게 변화함을 관찰함으로써 ZnO 첨가량에 일치한 역치(threshold)가 존재함을 확인하였다.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.150-154
• /
• 2019

This study investigates the effect of MnO2 and CuO as acceptor additives on the microstructure and piezoelectric properties of $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$, which has a rhombohedral-tetragonal phase boundary composition. $MnO_2$ and CuO-added $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$ ceramics sintered at a relatively low temperature of $1020^{\circ}C$ show a pure perovskite phase with no secondary phase. As the addition of $MnO_2$ and CuO increases, the sintered density and grain size of the resulting ceramics increases. Due to the difference in the amount of oxygen vacancies produced by B-site substitution, Cu ion doping is more effective for uniform grain growth than Mn ion doping. The formation of oxygen vacancies due to B-site substitution of Cu or Mn ions results in a hardening effect via ferroelectric domain pinning, leading to a reduction in the piezoelectric charge coefficient and improvement of the mechanical quality factor. For the same amount of additive, the addition of CuO is more advantageous for obtaining a high mechanical quality factor than the addition of $MnO_2$.

• The Korean Journal of Ceramics
• /
• 제6권1호
• /
• pp.43-46
• /
• 2000

$H_4Nb_6/O_{17}$/CdS nanocomposites which intercalated CdS particles, less than 0.8nm thickness, in the interlayer of $H_4Nb_6/O_{17}$ were prepared by the successive ion exchange reactions of $H_4Nb_6/O_{17}$ with $Cd^{2+}$ and $C_3H_7NH_3_+$, followed by the reaction with $H_2S$ gas. $H_4Nb_6/O_{17}$/CdS photocatalytically reduced $NO_3$￣ to $NO_2$￣ and $NH_3$in the presence of sacrificial hole acceptor such as methanol under visible light irradiation (wavelength>400nm), although unsupported CdS showed no noticeable photocatalytic activity for $NO_3$￣ reduction. The catalytic activity of $H_4Nb_6/O_{17}$/CdS greatly enhanced with co-doping of Pt particles in the interlayer.