• 한국주조공학회지
• /
• 제20권5호
• /
• pp.323-329
• /
• 2000

The HSS consists of hard carbide and matrix of martensite, and so its characteristics of wear resistance, fracture resistance, and surface roughness are good. This study was undertaken to investigate the influence of Nb and V and manufacturing conditions on microstructural behaviors and characteristics in the HSS cylindrical specimens(90 $mm^{O.D.}$ ${\times}$ 60 $mm^{I.D.}$ ${\times}$ 50 $mm^H$) manufactured using VCC(Vertical Centrifugal Casting). In the specimen of Fe-2C-6Cr-1.5W-3Mo-4V alloy, the amount of MC carbide was increased and $M_7C_3$ carbide was decreased with the increase of V and Nb contents. The primary VC carbide was formed and followed by the rod-type eutectic MC carbide was formed in the cell boundary in 9%V added specimen. MC carbide was increased, and $M_7C_3$ carbide was decreased with the addition of Nb content. In the specimen containing more than 3%Nb, primary NbC carbide was formed within the cell of matrix. With increase in rpm, cell and carbides became fine, and amount of carbide $M_7C_3$ was decreased due to increase in cooling rate.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.555-560
• /
• 2014

In this paper, in order to develop outstanding Pb-free composition ceramics, the $Fe_2O_3$-doped ($Na_{0.525}K_{0.443}Li_{0.037}$)($Nb_{0.883}Sb_{0.08}Ta_{0.037}$)$O_3$ + 0.3 wt% $Bi_2O_3$ + x wt% $Fe_2O_3$ (x= 0~1.0 wt%)(abbreviated as NKL-NST) lead-free piezoelectric ceramics have been synthesized using the ordinary solid state reaction method. The effect of $Fe_2O_3$-doping on their microstructure and electrical properties were investigated. XRD diffraction pattern studies confirm that $Fe_2O_3$ completely diffused into the NKL-NST lattice to form a new stable soild solution with $Fe^{3+}$ entering the $Nb^{5+}$, $Sb^{5+}$ and $Ta^{5+}$ of B-site. And, phase structure of all the ceramics exhibited pure perovskite phase and no secondary phase was found in the ceramics. The ceramics doped with 0.6 wt% $Fe_2O_3$ have the optimum values of piezoelectric constant($d_{33}$), planar piezoelectric coupling coefficient($k_p$) and mechanical quality factor($Q_m$) : $d_{33}$ = 233 [pC/N], $k_p$= 0.44, $Q_m$= 95. These results indicate that the ($Na_{0.525}K_{0.443}Li_{0.037}$)($Nb_{0.883}Sb_{0.08}Ta_{0.037}$)$O_3$ +0.3 wt% $Bi_2O_3$ + 0.6 wt% $Fe_2O_3$ ceramic is a promising candidate for lead-free piezoelectric ceramics.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.55-61
• /
• 2006

The microwave dielectric properties and low temperature sintering of $Ca[Ti_{1-x}(Ni_{1/3}Nb_{2/3})_x]O_3$ system were investigated at the sintering temperature $1,200\~1,350^{\circ}C$. The density and quality factors $(Q{\times}f)$ increased while dielectric constants slightly decreased with the decrease of Ti. The dielectric constant, quality factor, and temperature coefficient of resonance frequency $(\tau_f)$ were 64, 17,000 GHz, and $-9.1\;ppm/^{\circ}C$ respectively, when $CaTi_{1/2}(Ni_{1/3}Nb_{2/3})_{1/2}O_3$ ceramics were sintered at $1,300^{\circ}C$ for 4 h. $2Li_2O-B_2O_3$ was added to $CaTi_{1/2}(Ni_{1/3}Nb_{2/3})_{1/2}O_3$ to decrease the sintering temperature for LTCC application. The microwave dielectric properties of the samples sintered at $925^{\circ}C$ for 2 h with the addition of $6\;wt\%\;2Li_2O-B_2O_3$ were $\varepsilon_r=48.7,\;Q{\times}f=8,460\;GHz$, and $\tau_f=+5.6ppm/^{\circ}C$. Compatibility test of the composition with silver electrode shows no reaction with silver electrode, implying the feasibility as a high-K LTCC material.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.126-129
• /
• 2010

(1-X) $(Na_{0.5}K_{0.5})NbO_3-X$ $K_4CuNb_8O_{23}$ (NKN-X KCN) ceramics were produced using the conventional solid state sintering method, and their sinterability and electric properties were investigated. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCN content and the sintering temperature. In particular, the KCN addition to the NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 2.0 mol% sintered at $1,150^{\circ}C$ possesses the optimum properties (${\varepsilon}_r=241$, $d_{33}=78$, $k_p=0.34$ and $Q_m=1,121$). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.297-303
• /
• 1998

The effect of aliovalent dopants, $ Nb_2O_5$ and MnO, on the phase stability of 12 mol% ceria partially-stabilized zirconia (Ce-TZP) polycrystals was studied. Both dopants (MnO and $ Nb_2O_5$) significantly increased the stability of the tetragonal zirconia phase (Mb temperature lower than liquid nitrogen temperature). The enhancement of the stability of the tetragonal phase in Ce-TZP doped with 1 mol% of Mno(Ce-TZP/MnO) andCe-TZP doped with 1 mol% of $ Nb_2O_5$(Ce-TZP/$ Nb_2O_5$) were explained by the significant reduction of the driving force, -${\Delta}$Gchem, for the tetragonal-to-mono-clinic phase transformation caused by the addition of MnO and $ Nb_2O_5$. The enhanced stability of the tetragonal phase in the Ce-TZP and Al2O3 composite (Ce-TZP/$Al_2O_3$) is believed to be caused by smaller grain size, moderate reduction in the chemical driving force and increase in the strain energy barrier to the transformation. Mechanical properties of the Ce-TZP and the Ce-TZP/$Al_2O_3$ with (i) the same grain size and (ii) the same Mb temperature were examined by measuring stress-strain behavior in 3 point bending. The Ce-TZP/$Al_2O_3$ composite doped with 1.3w% MnO (Ce-TZP/$Al_2O_3$/MnO), which had the same grain size as the Ce-TZP and De-TZP/$Al_2O_3$ showed more transformation plasticity than either the Ce-TZP or the Ce-TZP/$Al_2O_3$ composite. The Ce-TZP wihch had the same Mb temperature as that of the Ce-TZP/$Al_2O_3$/MnO did not show any transformation plasticity.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.135-142
• /
• 2013

The Ti-6Al-4V extra low interstitial (ELI) alloy has been widely used as an orthopedic implant material because of its excellent mechanical properties and biocompatibility. However, it still has many problems, including a high elastic modulus and toxicity of the Al and V elements. Therefore, non-toxic biomaterials with a low elastic modulus need to be developed. A high energy mechanical milling (HEMM) process is introduced to improve the effect of sintering. Rapid sintering of spark plasma sintering (SPS) under pressure was used to make an ultra fine grain of Ti-25 wt.%Nb-7 wt.%Zr-10 wt.%Mo-(10 wt.%CPP) composites with bio-attractive elements for increasing strength. These composites were fabricated by SPS at $1000^{\circ}C$ at 60 MPa using HEMM powders. During the sintering process, $CaTiO_3$, TixOy, and CaO were formed because of the reaction between Ti and CPP. The effects of CPP content on the physical and mechanical properties of the sintered Ti-Nb-Zr-Mo-CPP composites were investigated. The biocompatibility and corrosion resistance of the Ti-Nb-Zr-Mo alloys were improved by the addition of CPP.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.285-292
• /
• 2012

Hot ductility behavior of precipitation-hardened low-carbon iron alloys containing 0.02 wt% Ti and 0.05 wt% Nb was characterized by a hot tensile stress test. Carbon (0.05, 0.1, 0.25 wt%) and boron (0.002 wt%) contents were varied to study the effect of precipitates on the high-temperature embrittlement of the alloys in the temperature range of $600{\sim}800^{\circ}C$. Ductility loss was observed at $700^{\circ}C$ for the tested alloys. The cause of the ductility loss was mainly attributed to the carbides and ferrite films formed at the grain boundaries during deformation. Although the carbon content tended to raise the total fraction of Nb (C, N), the precipitates were formed mostly in the grain interior as the precipitation temperature was raised above the deformation temperature by the high carbon content. Hence, carbon in excess suppressed the hot ductility loss. Meanwhile, boron addition improved the hot ductility of the alloys. The improvement is likely due to the boron atoms capturing carbon atoms and thus retarding the carbide formation.

• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.253-258
• /
• 1997

반도체화 첨가제인 $Y_2O_3$와 $Nb_2O_5$ 첨가랑 변화에 따른 PTCR $BaTiO_3$ 세라믹스의 결정구조 해석과 상전이 특성을 연구하기 위하여 ($Ba_{0.85}Ca_{0.15})TiO_3$ ＋ X m/o $Nb_2O_5$(Y m/o $Y_2O_3$) ＋ 0.08 w/o $Mn(NO_3)_2$ㆍ$6H_2O$ ＋ 0.25 w/o $SiO_2$ 계에서 X는 0.1 ~ 0.4로 Y는 0.2 ~ 0.4로 각각 변화시켜 실험을 수행하였다. $Nb_2O_5$의 첨가시 B-site 치환에 따라서 격자상수가 선형적으로 변화하다가 0.3 mol% 이상 치환할 경우 c 축의 격자상수가 급격히 감소함을 알 수 있었다. 이는 octahedron distortion둥의 원인으로 판단되며, 이러한 격자상수 변화는 상전이 온도 결과와도 잘 일치함을 확인할 수 있었다. 또한 $Y_2O_3$ 첨가의 경우 0.3 mol%가지는 A, B-site를 각각 치환하며 그 이상부터는 A-site 이온을 주로 치환하는 것을 격자상수 변화와 상전이 온도결과를 통해 알 수 있었으며, Rietveld 해석결과 $Y^{3+}$가 A-site 치환시 $Ba^{2＋}$와 $Ca^{2＋}$를 같은 비율로 치환한다는 것을 알 수 있었다.

• 한국가축번식학회지
• /
• 제25권3호
• /
• pp.251-257
• /
• 2001

본 연구는 품종, 산차, 산자수, 포유기 간 및 발정재귀일수가 차기 산차의 번식능력에 미치는 영향을 규명하기 위하여 수행되었으며, 자료는 연암축산원예대학 부속농장에서 1998년 3월부터 2000년 7월까지 사육된 Landrace종, Yorkshire종 및 이들의 교잡으로 생산된 교잡종 모돈 429두에 대한 기록으로부터 얻었다. 품종의 효과에 있어서 교잡종은 총산자수, 생존산자수 및 포유개시두수가 순종보다 많았다. 산차의 효과에 있어서 총산자수와 생존산자수는 3∼7산까지는 다른 산차에 비해 많았고, 8산차에서 가장 적었다. 또 사산수는 산차가 증가함에 따라 증가하였다(P＜0.05). 그리고 산차의 모든 번식형질들은 처리간에 유의성이 있었다. 산자수의 효과에 있어서 현재의 산자수는 차기 산차의 산자수, 생존산자수 및 포유개시두수에 영향을 미쳤으며, 현재의 산자수가 증가함에 따라 차기 산차의 산자수, 생존산자수 및 포유개시두수도 유의하게(P＜0.05) 증가하였다. 포유기간의 효과에 있어서는 현재의 포유기간이 20~21일인 경우에 차기 산차의 산자수, 생존산자수 및 포유개시두수가 가장 많았다(P＜0.05). 모돈의 발정재귀일령의 효과에 있어서 발정재귀일수 7∼13일이 차기 산차의 복당 산자수, 생존 산자수 및 사산 자돈수가 각각 10.00, 9.63 및 0.37두로 모든 발정재귀일수 그룹 중에서 가장 적었다(P＜0.05).

• 한국자원식물학회지
• /
• 제32권4호
• /
• pp.318-324
• /
• 2019

본 연구는 참당귀 재배 시에 발생하는 추대 참당귀를 부산물로 활용가능성이 있는지 평가하기 위해 수행하였다. 추대 참당귀의 지상부와 지하부의 총무게는 수확기 비추대 참당귀의 지하부 무게 대비 약 98.5%로 높게 나타났다. 또한 추대 당귀의 decursin과 decursinol angelate의 총 함량은 주 생산품인 참당귀 신(身)의 지표성분 총 함량인 4.24%와 대비해 부위별로 0.64%~2.39%로 나타났으며, 이는 추출물로 이용 시 생산품 대비 15~56%에 해당하는 것으로 나타났다. 또한, 항상화 활성의 경우 추대 참당귀는 전반적으로 비추대 참당귀에 비해 우수한 것으로 나타났다. 추대 참당귀의 생산량, 지표성분 함량 그리고 항산화 활성 결과를 고려해 봤을 때, 추대 참당귀의 부산물은 사료 첨가제 및 화장품 용도의 추출물로 이용 가능성이 높은 것으로 생각된다.