• Korean Journal of Metals and Materials
• /
• v.50 no.6
• /
• pp.469-475
• /
• 2012

A high-energy mechanical milling (HEMM) process was introduced to improve sinter-ability, and rapid sintering of spark plasma sintering (SPS) under pressure was used to make ultra fine grain (UFG) of Ti-Nb-Mo-CPP composites, which have bio-attractive elements, for increasing mechanical properties. Ti-Nb-Mo-CPP composites were successfully fabricated by SPS at $1000^{\circ}C$ within 5 minutes under 70 MPa using HEMMed powders. The Vickers hardness of the composites increased with increased milling time and addition of CPP contents. Biocompatibility and corrosion resistance of the Ti-Nb-Mo alloys were improved by addition of CPP, and the Ti-35%Nb-10%Mo-10%CPP alloy had better biocompatibility and corrosion resistance than the Ti-6Al-4V ELI alloy.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.336-338
• /
• 1991

Effects of $Nb_2O_5$ addition ranged from 0.0 to 0.75(wt%) on the microstructure and electrical porperties of PZT ceramics have been investigated. The Pb vacancy concentration increases with increasing NbO content. However, the experimental results show the resistivity increases with increasing $Nb^{5+}$ content. This behavior can be explained as a compensation effect and $Nb^{5+}$ can serve as a donar and contribute electrons to the conduction process. According to the law of mass action, this result may reduce the total charge carrier:thus the resistivity increase with NbO content in PZT.

• Tribology and Lubricants
• /
• v.16 no.3
• /
• pp.194-200
• /
• 2000

In order to evaluate the effect of Nb on wear properties of high speed steel(HSS) by powder metallurgy, niobium-alloyed HSS have been prepared by adding 0%, 1%, 3% and 5%Nb to HSS of 6%W-5%Mo-4 %Cr-5%V-5%Co. Sliding wear tests were conducted at various sliding speed conditions under the constant pressure using a pin-on-disc type machine. The results of this study show that the wear resistance of HSS by powder metallurgy was increased by the addition of Nb within the range of sliding speed used in this experimental study. However, the amount of Nb did not improve the wear resistance. It may be due to the thermal stability of carbide and high temperature properties of the matrix containing Nb comparing to that without Nb.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.333-336
• /
• 2005

The reduction behavior of $Nb_2O_5$ in aluminum containing self-reducing briquettes(SRNB) was investigated. The time required for slag/metal equilibrium was estimated as about 20 minutes from the addition of SRNB on to the surface of molten steel. The maximum yield of Nb was expected with the slag composition of $60\%CaO-40\%Al_2O_3$. When $CaCO_3$ was used as a flux, the oxidation loss of Al by $CO_2$ should be compensated, and the chemical equivalent ratio of Al to $Nb_2O_5$ of about 1.43 was required to maximize the yield of Nb.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.140-140
• /
• 2000

The initial growth mode of Nb on Ag(11) in sub-monolayer regime and the influence of subsequent 520K annealing are studied using UHV Scanning Tunneling Microscopy. E-beam evaporated Nb is deposited onto the substrate at RT, and STM measurements are carried out at RT and 78 K. With Nb being immiscible in bulk Ag, 3D islands formation begins at early stage and no particular ordered structure is found. After annealing to 520K, most of islands are disappeared from terrace. There exist 2 possibilities. : (1) Diffusion of Nb into the 2nd or 3rd layer of Ag substrate or (2) agglomeration of Nb on Ag at higher temperature. A model will be given to explain the evidence. In addition, we investigated the change of STM image according to bias voltage depending on island size. Possible physical mechanism responsible for such behavior together with interaction between Nb islands and reactive gases will be also discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.256-259
• /
• 1996

$(Sr_{1-x}{\cdot}Ca_x)TiO_3+yNb_2O_5$($0.05{\leq}x{\leq}0.2$, 0.004$1350[^{\circ}C]$ in a reducing atmosphere($N_2$ gas). Dielectric propertries were investigated with contents of $Nb_2O_5$. The grain size and dielectric constant increase with increase $Nb_2O_5$, but decrease in $Nb_2O_5$ exceed($Nb_2O_5=0.6[mol%]$). Also, the temperature characteristics of the dielectric loss factor exhibited a stable value within 0.5[%]. The capacitance characteristics appeals a stab]e value in ${\pm}10[%]$.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.452-459
• /
• 1999

To develop advanced cladding materials, the effect of Nb addition on the microstructure and corrosion characteristics of Zr-0.8Sn-xNb alloys was investigated. As the Nb content increased, the grain size decreased and the volume fraction of precipitates increased. It was observed from the corrosion test at $360^{\circ}C$ that the corrosion resistance increased with decreasing Nb content. The best corrosion resistance was obtained in Zr-0.8Sn-0.2Nb alloy with high volume fraction of tetra-$ZrO_2$in the oxide. Therefore, it is suggested that Nb in theZr-0.85Sn-xNb system should be added within the solubility limit of Nb from the viewpoint of alloy design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.305-305
• /
• 2010

In this study, in order to develop excellent lead free piezoelectric ceramics for piezoelectric transformer application (Na,K)(Nb,Sb)$O_3$ ceramics were fabricated using conventional oxides mixed method and their piezoelectric and dielectric characteristics were investigated according to the amount of $Bi_2O_3$ addition.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.249-257
• /
• 1989

Dielectric properties and the stability of the perovskite phase in the Pb(Mg1/3Nb2/3)O3 system have been investigated as a function of amount of BaTiO3 and firing temperature. In the specimens fired at 120$0^{\circ}C$, the pyrochlore phase was eliminated by the addition of 10-15m/o BaTiO3 and also the dielectric constant increased. However, the dielectric constant decreased with further addition of BaTiO3 even though no pyrochlore phase was found to be present. The reducing tendency of the pyrochlore phase decreased with lowering the firing temperature in the system of Pb(Mg1/3Nb2/3)O3 with BaTiO3. Dielectric properties in PMN ceramics were affected by the character of the BaTiO3 rather than the pyrochlore phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.232-235
• /
• 1999

In this paper, We described the effect of $MoO_3$ Addition and firing temperature on the microwave dielectric properties of $BiNb0_4$ ceramics. The specimens prepared by conventional mixed method was addicted by 0 - 0.03 wt% $MoO_3$ and fired at 860 - $950^{\circ}$ for 3hr. Density increased when $MoO_3$ is below O.Olwt% but decreased when over O.Olwt%. $BiNb0_4$ ceramics addicted with CuO 0.03wt % and $MoO_3$ 0.01 wt% showed microwave dielectric properties, Dielectric constant 37.5, Quality factor[Qx$f_0$]5500, Temperature coefficient of resonance frequency 15ppm/$^{\circ}$