• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.371-374
• /
• 2004

저온동시 소성용(low temperature co-fired ceramics, LTCC) 마이크로파 유전체을 만들기 위해 $Ca(Li_{1/4}Nb_{3/4})O_3$ 마이크로파 유전체 세라믹스에 zinc-borosililcate glass를 첨가하여 소결 특성과 마이크로파 유전 특성을 조사하였다. $Ca(Li_{1/4}Nb_{3/4})O_3$과 $0.7Ca(Li_{1/4}Nb_{3/4})O_3-0.3CaTiO_3$에 zinc-borosilicate를 $5{\sim}30wt%$ 첨가하여 소결한 결과 $875{\sim}925^{\circ}C$에서 동시 소성이 가능한 것으로 확인되었으며 zinc-borosilicate glass의 함량이 증가할수록 저온에서 소성이 가능하였지만 과량의 액상과 2차상이 형성되면서 유전율과 품질계수가 저하되는 경향을 나타내었다. $Ca(Li_{1/4}Nb_{3/4})O_3$에 5wt%의 zinc-borosilicate를 첨가하여 $900^{\circ}C$에서 소성한 결과 가장 우수한 유전 특성$(\epsilon_r=17.45,\;Q{\times}f_0=5487)$을 나타내었고, 유전율을 높이기 위해 $CaTiO_3$를 0.3mol% 첨가한 $0.7Ca(Li_{1/4}Nb_{3/4})O_3-0.3CaTiO_3$에 10wt%의 zinc-borosilicate를 첨가하여 $925^{\circ}C$에서 소성한 결과 가장 우수한 유전특성$(\epsilon_r=44.92,\;Q{\times}f_0=5567)$을 나타내었다.

• Korean Journal of Materials Research
• /
• 제11권5호
• /
• pp.405-412
• /
• 2001

Corrosion tests were carried out in $360^{\circ}C$ water and $360^{\circ}C$ 70ppm LiOH solution to investigate the corrosion behavior of new zirconium alloys (Zr-0.4Nb-0.8Sn-xFeCrMn, Zr-0.2Nb-1.1Sn-xFeCrMn, Zr-1.0Nb-xFeCu). Microstructures of tested alloys were analyzed by optical microscope and TEM. The cross-sectional surface and crystalline structure of the oxide layer were analyzed by SEM and XRD. From the results of corrosion test, all the alloys showed higher corrosion rates in $360^{\circ}C$ 70ppm LiOH aqueous solution thats in $360^{\circ}C$ water. Especially, high Nb-containing alloy exhibited the acceleration of corrosion rate in LiOH solution. The low Nb- and Sn-added alloys showed better corrosion resistance than the Sn- free high Nb alloy. from the effect of final annealing on the corrosion, it was observed that the partially recrystallized alloys showed better corrosion resistance than fully recrystallized alloys. This would be related to the size and distribution of the second phase particles.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제13권3호
• /
• pp.34-40
• /
• 2009

For the preparation of carbon-slurry fuel, the effects of process parameters on the carbon dispersion stability in the liquid fuel have been investigated. The dispersion stability of carbon-slurry fuels could be monitored by measurements of particle size and carbon contents in the different positions, and observation of dispersion states after centrifuging. Through the application of various additives, it was found that NB463S84 based on polyolefin succinimde showed the best dispersion and longest stability life of carbon-slurry fuel. Also, PIBSI (polyisobutenyl succimide) with the similar functional groups to NB463S84 was effectively synthesized and same dispersion stability was verified by application to carbon-slurry fuel. Finally, the possibility of practical use of carbon-slurry fuels was confirmed by application of the mixing conditions obtained from g scale to kg scale preparation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.324-325
• /
• 2011

최근에 고효율의 적색 형광체를 합성하여 형광 램프, 음극선관, X-선 검출기, 전계 발광 디스플레이에 응용하기 위하여 다양한 모체 결정과 활성체를 도핑하는 연구가 활발히 진행되고 있다. 본 연구에서는 $GdNbO_4$ 모체 결정에 $Eu^{3+}$ 이온 활성체를 주입하여 합성함으로써 새로운 적색 형광체의 발광 세기와 입자의 형상을 최적화 시키고자 한다. 형광체 분말 시료의 제조는 Eu의 함량을 0, 0.05, 0.10, 0.15, 0.20 mol로 변화시키면서 고상 반응법을 이용하여 합성하였다. 초기 물질 Gd2O3 (99.99%), $Nb_2O_5$ (99.99%), $Eu_2O_3$ (99.9%)를 화학 적량으로 측량하고 에탄올과 ZrO2 볼과 함께 플라스틱 병에 넣어 400 rpm의 속도로 24시간 볼밀 작업을 수행한 후에, 혼합된 분말의 볼을 걸러내고 60$^{\circ}C$에서 20시간 동안 건조하였다. 건조된 시료를 막자 사발에 넣고 잘게 갈아서 체로 걸러낸 다음에 세라믹 도가니에 넣고 전기로에서 분당 5$^{\circ}C$씩 승온하여 500$^{\circ}C$에서 10시간 동안 1차 하소한 후에, 계속 온도를 승온시켜 1,200$^{\circ}C$에서 3시간 동안 소결하여 합성하였다. XRD 회절 패턴의 경우에, $Eu^{3+}$의 함량에 관계없이 모든 세라믹은 JCPDS (22-1104)에 제시된 회절상과 일치하는 사방정계의 결정 구조를 가짐을 확인할 수 있었다. 주 피크는 28.4$^{\circ}$에서 최대값을 갖는 (121)면에서 발생하는 회절 신호이었다(Fig. 1). 적색 형광체 분말의 광학 및 표면 특성은 PL, PLE와 SEM으로 조사되었으며, 세라믹 분말의 형광 특성과 결정 구조, 표면 형상에 대한 자세한 논의가 제시될 것이다.

• Journal of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.302-308
• /
• 1984

X-ray spectrometric determination of $Ta_2O_54, $Nb_2O_5$ and $ZrO_2$ in tin-slag samples using the double dilution technique was conducted. Tin-slag samples and one synthesized standard sample having similar composition to the samples were diluted with anhydrous $Li_2B_4O_7$ at the level of 1.00, 2.00 and 3.00% of the sample content, respectively. The diluted samples were fused at $1,150^{\circ}C$ for 30 minutes, and these glass beads were finely ground and pelletized. With the X-ray intensities measured, analytical results were calculated by the double dilution equation. The results agreed to the reference values obtained by the standard calibration method and the simple dilution technique within allowable error range and were reproducible.

• Analytical Science and Technology
• /
• 제20권6호
• /
• pp.468-473
• /
• 2007

The chemical composition distribution of the surface samples collected from the loess plateau in China were estimated. Major elements concentration distribution difference between 10 different sampling site were not found except sample 3. This sample had higher contents of Ca, Mg, LOI and lower contents of Si, Fe, P, Na, Ti. And also, minor element contents such as Ba, Cr, Nb, Pb, Rb, Zr, V were lower than other samples. UCC-normalized abundances of the most elements were within $0.5-1.5{\times}UCC$ and Cr showed enrichment aspect. Rare-earth element (REE) analysis results showed light REE enriched pattern compared to heavy REE with negative Eu anomaly in condrite-normalized REE pattern.

• Korean journal of food and cookery science
• /
• 제32권1호
• /
• pp.50-57
• /
• 2016

In this study, kim (dried laver) bugak ("KB"), Aster yomena bugak ("SB"), and namul (vegetables)-kim bugak (combination of Aster yomena and kim) ("NB") were prepared and their quality characteristics were investigated. NB was made by slicing Aster yomena, seasoning it with perilla seeds, attaching it to kim and applying glutinous rice paste, followed by freeze-drying. SB had a higher oil absorption rate than KB, reflecting the high oil absorption rate of namul (here, Aster yomena). DPPH radical scavenging activity was highest for SB; whereas, NB had higher DPPH radical scavenging activity than KB, indicative of the higher antioxidant capacity of namul, as compared to kim. With longer storage period, moisture content tended to be increased, while maximum load, yield stress and hardness tended to be decreased. Overall preference was in the order of NB>KB>SB, without statistical significance. Acid value and peroxide value of NB, stored at $25^{\circ}C$ for 40 days, tended to be increased gradually but did not meet the criteria for rancidity. Therefore, NB could be stored at $<25^{\circ}C$ for > 40 days. Furthermore, it would be possible to make functional bugak using a variety of namul, as well as Aster yomena.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권7호
• /
• pp.890-899
• /
• 2014

Austenitic stainless steel is widely used in various industries due to its excellent corrosion resistance. However, Cr carbides precipitation along the grain boundaries after heat treatment or welding may develop Cr depleted zone, which acts as a preferential site for intergranular corrosion attack. To resolve this, carbon stabilizing element such as Ti or Nb are added to suppress formation of Cr carbides. However, there are few reports on corrosion characteristics under seawater environment of the stabilized stainless steel. This study investigated the effects of alloying contents on the electrochemical characteristics in seawater of stainless steel containing stabilizing element(Ti and Nb). To achieve this, the changes on the microstructure due to alloying were observed with microscope, and the electrochemical characteristics were determined by measurement of natural potential and potentiodynamic polarization experiments. The microscopic observation revealed that all specimens had inclusions other than the austenite matrix phase due to the addition of alloying elements. Such inclusions are considered to have different electrochemical characteristics from those of the matrix, and thus a clear distinction was found according to the type of stabilizers and the contents. The results of this study suggest that it is important to consider the effects of alloying contents on the electrochemical characteristics in seawater with the addition of Ti or Nb into austenitic stainless steel.

• Korean Journal of Microbiology
• /
• 제37권2호
• /
• pp.114-119
• /
• 2001

Many isolates from different forest soil layers did not show appreciable growth on full strength of the conventional nutrient broth (NB medium) but grow on its 100-fold dilution (DNB medium). These isolates were divided into four types according to organic nutrient concentration in the growth medium from $1^{-1}\;to\;10^{-4}$dilution of normal NB medium. Oligotrophic bacteria were type II and type IV which grew in $10^{-4}$ dilution of NB (1 mg C/l) medium. Sixty strains were isolated for obligate oligotrophic bacteria. Chemotaxonomic and phylogenetic characteristics of eleven isolates of acetylene-reducing (nitrogen-fixing) oligotrophic bacteria from forest soil were investigated. They showed similar characteristics: the cellular fatty acid mainly consisted of straight-chain unsaturated $C_{18:1}$ (60-84% of total fatty acids). Ubiquinone Q-10 and a high guanine plus-cytosine content(61-64 mol%) were found. Eleven isolates of nitrogen-fixing oligotrophic bacteria were found to be closely related by full 16S rDNA sequence simility and many common taxonomic traits. Analysis of full 16S rDNA sequences of eleven isolates indicated that they were more closely related to Bradyrhizobium (similarity values: 98.1-98.8%), Agromonas, Nitrobacter, and Afipia.

• Journal of Korea Foundry Society
• /
• 제41권5호
• /
• pp.445-453
• /
• 2021

Computational thermodynamics for various alloy systems is well known as the CALPHAD technique. Gibbs energy model parameters for each phase are obtained from experimentally measured thermodynamic properties and are mainly used to predict areas not experimentally measured and to analyze experimental results thermodynamically. In this study, the thermodynamic modeling of the Ni-Cr-Nb-C quaternary system is conducted for a thermodynamic analysis of the phenomena by which heat-resistant cast alloys (IN-657) are destroyed in certain areas after long-term use. The stable phases in the system according to the Cr content, phase fraction depending on the temperature, and long-range ordering parameters for the Ni₂Cr phase are calculated and compared to results obtained experimentally. The calculated thermodynamic properties suitably explain the experimentally reported fracture temperature range and the results of stable phases formed in the fractured areas. Thermodynamic modeling through the CALPHD method is expected to be useful for analyzing and predicting the thermodynamic behaviors of various cast alloys.