• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.303-312
• /
• 2022

Bridges across waterways act as interference factors, that reduce the navigable water area from the perspective of navigation safety. To analyze the safety navigational width of ships navigating bridges across waterways, the optimal traffic distribution based on AIS data was investigated, and ships were classified according to size through k-means clustering. As a result of the goodness-of-fit analysis of the clustered data, the lognormal distribution was found to be close to the optimal distribution for Incheon Bridge and Busan Harbor Bridge. Also, the normal distributions for Mokpo Bridge and Machang Bridge were analyzed. Based on the lognormal and normal distribution, the analysis results assumed that the safe passage range of the vessel was 95% of the confidence interval, As a result, regarding the Incheon Bridge, the difference between the normal distribution and the lognormal distribution was the largest, at 64m to 98m. The minimum difference was 10m, which was revealed for Machang Bridge. Accordingly, regarding Incheon Bridge, it was analyzed that it is more appropriate to present a safety width of traffic by assuming a lognormal distribution, rather than suggesting a safety navigation width by assuming a normal distribution. Regarding other bridges, it was analyzed that similar results could be obtained using any of the two distributions, because of the similarity in width between the normal and lognormal distributions. Based on the above results, it is judged that if a safe navigational range is presented, it will contribute to the safe operation of ships as well as the prevention of accidents.

• Journal of Navigation and Port Research
• /
• v.29 no.7
• /
• pp.627-634
• /
• 2005

Gunsan-Janghang Harbor is located at the mouth of Gum River, on the central west coast of Korea The harbor and coastal boundaries are protected from the effects of the open ocean by natural coastal islands and shoals due to depositions from the river, and two breakwaters. The navigation channel commences at the gap formed by the outer breakwater and extends through a bay via a long channel formed by an isolated jetty. For better understanding and analysis of wave transformation process where a wide coastline changes appear due to on-going reclamation works, we applied the spectral wave model including wind effect to the related site, together with the energy balance models. This paper summarizes comparisons of coastal responses predicted by several numerical wave predictions obtained at the coastal waters near Gunsan-Janghang Harbor. Field and numerical model investigations were initially conducted for the original navigation channel management project. We hope to contribute from this study that coastal engineers are able to use safety the numerical models in the area of port and navigational channel design.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.61-67
• /
• 2021

With the recent development of bathemetry technology, the hydrographic surveying method has been changed from single beam depth device use to multi beam acoustic sounding technology. Also, various studies have been reported to obtain high accuracy and precision in the process of river bed topographic data. Especially south korea is geographically on three sides of the sea and the river topography is very developed. To build information about the underwater, and riverbed status, the public investigations has been continuously progressed. In this study, We investigasted the riverbed topography near Baeckma river leisure park. for this purpose, In this study, as the first preliminary survey, location of navigational dangerous objects and reefs and the dangerous areas are identified. Also, ground control points is selected for the optimal GPS surveying. Secondary, through test surveying the Gain, TVG, and pulse length are determined. In addition, the investigation of dangerous objects for navigation is also conducted. As the last step, the error analysis are conducted for the acquired data, and this process involves the removal and adjustments of errors. This section includes the analysis of tide level and navigational contributions, and finally generates a submarine topographic map.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.141-147
• /
• 2015

On July 1 2012, the carriage requirement for ECDIS became mandatory in a phased-in manner. The system has since been widely used as a core bridge navigation system and as a replacement for paper charts with a back up arrangement. However operational anomalies have been found in the system internationally. IMO and IHO have recognised these anomalies and seek for solution. This study has been conducted on a survey of seafarers on the use of ECDIS with regard to anomalies identification, level of the seafarer satisfaction and requirements for further functional improvement. From the results, the ECDIS user focused requirements suggested on strengthening the level of navigational safety and efficiency. The efficiency of using main functions of ECDIS was positively evaluated. However, there were concerns regarding its operational safety.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.89-95
• /
• 2016

S-Mode is a concept involving a standardized navigation display with accompanying standardized functionality and interfaces for navigational equipment. It was proposed by the International Federation of Shipmasters' Associations at IMO NAV $54^{th}$ session in 2008. The IMO e-Navigation Strategy Implementation Plan(SIP) addresses, S-Mode and the IMO MSC at its $95^{th}$ session in 2015 approved an output 1 to develop S-Mode guidance. In this study, it has been carried out survey of user needs for adopting S-Mode guideline on ECDIS which is core navigational equipment. It is conducted with a questionnaire survey, targeting deck officers and masters who will be the primary users of the equipment related to the e-Navigation system. In this research, users' opinion survey regarding the necessity of development, the scope of standardization, and priorities was conducted. This survey result could be contributed to development S-Mode guideline and specify the concept of S-Mode. It would be derived from standardizing component through providing elements to be considered for its development.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.437-445
• /
• 2015

The layout of facilities, in relation to information and navigational displays, has great influence on subway satisfaction, and tend to vary depending on the types of subway platform and transit station. However, until now, few studies have covered such aspects as of yet. Starting from this viewpoint, the purpose of this study was to use an IPA analysis technique to analyze that satisfaction on the importance of facilities to aid in accessibility, such as elevators and escalators, transit amenities and information and navigational displays depending on the types of platform and transit station. To do so, we've classified 15 metropolitan stations according to types of platform and transit station and analyzed differences in user importance and satisfaction as well as improvements for platforms and transit stations of similar type. By the analysis results of this study, we've concluded that the proper selection and positioning of elevator and escalator facilities and information and navigational displays was important when designing the subway station according to platform type (separate platform) and or according to the transit station type (cross, L, T types) where pedestrian flow heavily intersected. We considered that such analysis results would be helpful in the design of new stations and the enhancement of existing stations pursuant to a new direction that minimizes user inconvenience, and that improvement items should be developed first according to the platform and transit station types, which would be helpful in enhancing the efficiency of the subway improvement cost.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.201-208
• /
• 2017

The major cause of the marine accidents is the collision with a moving object such as ship as well as the fixed object such as breakwater. Therefore, the most effective way to reduce the maritime ship accidents is the prevention of collision. In order to decrease the collision, it is principle that the navigation officer promptly judges the dangerous condition and makes the quick response. The ship does not allow any object or other ships approaching its surrounded area called ship area so that it prevents the collision. Generally, the ship which has high speed or poor maneuvering capability shall be managed from the distance so that the other ship does not invade its ship domains(watching distance, blocking distance). Accordingly, this study sets the navigational risk assessment model by applying ship dynamic domain and collision judgement method considered ship length, speed and navigational capability. It also reviewed the validity of the model and evaluated the perilous water way (Maenggol Channel) and a curved route near Maenggol Channel. As a result, in case of a ship with 100m in length passing Maenggol Channel, it represented "warning" level before 1.5nm to the entry, "dangerous"level 0.75nm before to it and "very dangerous" level 0.5nm before to it and then "dangerous"level again up to the entry. Applying to the curved route also showed the same results as the Narrow Channel or Maenggol Channel. This analysis highly matched with the actual navigation results. In the future, this model will be useful for coastal navigation safety chart development and safety evaluation for route or port development. It also allows to evaluate the dangerous route or the best route by applying the result into ECDIS so that it will finally help to reduce the marine accidents. Eventually the model will be effective for the marine traffic simulation evaluation forced by Maritime Traffic Safety Act.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.3
• /
• pp.272-280
• /
• 2014

Most of the car navigation systems pzrovide 2D or 3D virtual map-based driving guidance. One of the important issues is how to reduce cognitive burden to the driver who should interpret the abstracted information to real world driving information. Recently, an augmented reality (AR)-based navigation is considered as a new way to reduce cognitive workload by superimposing guidance information into the real world scene captured by the camera. In particular, head-up display (HUD) is popular to implement AR navigation. However, HUD is too expensive to be set up in most cars so that the HUD-based AR navigation is currently unrealistic for navigational assistance. Meanwhile, smartphones with advanced computing capability and various sensors are popularized and also provide navigational assistance. This paper presents a research on cognitive effect and responsiveness of an AR navigation by a comparative study with a conventional virtual map-based navigation on the same smartphone. This paper experimented both quantitative and qualitative studies to compare cognitive workload and responsiveness, respectively. The number of eye gazing at the navigation system is used to measure the cognitive effect. In addition, questionnaires are used for qualitative analysis of the responsiveness.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.321-322
• /
• 2022

In this study, the marine environment is measured and analyzed in real time through the X-band radar installed on the rooftop of the Sokcho Beach administrative Welfare Center and Ulleungdo. Afterwards, the goal is to transmit the analysis results to the client PC. Using electronic maps and electronic navigational charts, the measurement results are overlaid on GIS (spatial information system), real-time data are shared through a website, and information is displayed through a web server. Currently, CCTV information and marine environment information are displayed on the website, but various application studies such as the use of Open AP I will be conducted in the future.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.239-245
• /
• 2016

In the midst of continuing international recession, the rate of maritime traffic and marine leisure markets are consistently growing. The Republic of Korea controls the marine traffic volume through vessel traffic centers and various other management facilities. Nevertheless, the continuous growth and complexity of marine traffic is resulting in repeated occurrences of marine accidents. Recovery is very difficult in cases of human injuries or deaths caused by marine accidents due to its nature, and the scale of marine accidents is also becoming greater with advanced ship building technologies. Passenger ships, oil tankers, and other such vessels used for specific purposes requires a more detailed navigational status surveillance and analysis, and numerous research has been conducted with an objective for monitoring such special purpose vessels. However, the data elements transmitted from the ocean to the shore station are limited to AIS and ARPA. We are implementing IoT ship sensor collection and a syncing system capable of transmitting various ship sensing data to the shore station, and also proposing a Safe Navigation Status Analysis System utilizing the collected data.