• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.238-239
• /
• 2019

Cyber attacks can be caused by all equipment that perform communication functions, and the link between ship and land due to the development of communication technology means that the ship sector as well as the land sector can be easily exposed to cyber threat vulnerability. In this paper, we analyze cyber threat trend changes to identify cyber security vulnerabilities in the maritime sector and propose measures to enhance cyber security through other industry case studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.214-220
• /
• 2002

If neither a map, nor geographic-information processing equipment or a micro browser was prepared in a move terminal in the case of the old system, traffic guidance processing was not able to be carried out. Even if this system was required and did not carry out above -mentioned equipment or an above-mentioned system with a move terminal or a cellular phone, it could be made to do it. Traffic information guidance processing is possible to be completed only by the general telephone or electronic mail transmission.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.141-148
• /
• 2001

This paper describe the development of narrow-band passband filter with small package and low loss, high selectivity performance. This filter is placed between power amplifier and frequency mixer of IMT-2000 mobile equipment. The elliptic-function narrow-band passband filter is designed with new architecture using the microstrip line. This package is very small by $3.2cm{\times}1.25cm$ and have the 3 % 3 dB bandwidth. Also in the passband the insertion loss is about 2.5 dB and is better than older RF SAW filter(insertion loss: 3.2 dB). In the stop-band it has the two deep notch under the -56 dB.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.69-74
• /
• 2017

These days as there are a growing vessel volume in the costal area, the marine accidents has being increased. IMO recommend that all vessels have to be equipped with the safety equipments mandatorily for the safety navigation. Almost medium and large size vessels are equipped with the safety navigational equipments, But many small size vessels are not equipped with those ones because of its owner's financial hardship or indifference. So for the safety of small size vessels in the coastal area, the marine accidents such as stranding, sinking, collision, and so on, have to be protected in advance or the occurred accidents has to be treated quickly. In this paper, the safety equipment for small size vessels having these functions has been developed. This equipment can guarantee the safety of small size vessels in defenseless state considerably by displaying these states in seamen's Smart phone or the cheap dedicated terminal and also informing the control center and nearby other vessels of these states.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.433-440
• /
• 2021

The problem of maritime accidents due to the carelessness of fishing vessels, which is affected by the aging of fishing vessel operators. And there is navigation, communication and fish finder that is installed inside the narrow bridge of a fishing vessel. Therefore these system are monitors as many as of each terminal, which is bad influence on obscuring view of front sea from a fishing vessel bridge. In addition a large problem, it is occurs to reduce of the information recognition ability due to the confusion, which is can not check the display information each of screen equipments. Therefore, there has been demand to simply integrated the equipment, and it has wanted the integrated support system of these equipment. The display must be provided on a fishing vessels such as electronic charts, communications equipments and fish detection into one case. In this paper, the integrated system will be installed the GPS plotter, AIS, VHF-DSC, V-pass, fish finder and power supply in the narrow wheelhouse on a fishing vessel, which is configured in one case and operated by multi function display (MFD). The MFD is integrated to simplify for several multi terminals and provided necessary information on a single screen. This integration fishery support system will has improved in sea safety operation and fishery environment of fishing vessels by this implementation.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.142-150
• /
• 2008

In order to ensure the individual and mutual performances among the telemetry system, tracking system, flight termination system, GPS, and inertial navigation & guidance system which are installed in the KSLV-I 2nd stage and ground equipment of the Naro space center, flight test using a light airplane is required. Since the high degree of test efficiency is fulfilled through the minute plan and analysis about selection of the equipment which are applicable to the test, harness, operation strategy, and antenna installation. KSLV-I communication environment and flight profile should be precisely taken into account during the flight test. In this document, overall aspect of the KSLV-I 2nd stage equipment specification, a rack for the installation, harness, the airplane specification, and flight route which are required for the effective flight test are presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.177-187
• /
• 2001

It is important to test and evaluate the variation degree of ship-mounted antenna radiated power with respect to all directions in order to use more effectively antennas that installed on naval ships. The naval ship has various sensors for navigation, communication and electronic warfare, etc. And the performance of these sensors extremely depends on the various characteristics of antenna system to transmit and receive electromagnetic wave. The radiated power pattern of the antenna differs from all aspect angles of the ship because of complex superstructures. It is important to know the weak point(direction) of antenna radiation for appropriate operation. Therefore, the ARP(Antenna Radiation Pattern) of shipboard antennas is measured for the all aspect angles. The results of ARP measurement are utilized as reference for antenna arrangement of newly-built same class warship. This study also describes the development results for the ARP measurement technique, software design and test procedures to measure the radiation pattern of communication equipment antennas using the fixed test site.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.300-302
• /
• 2019

The mast, which is the highest structure in warships, as well as merchant ships, is mainly equipped with radars and navigation lights. Especially, due to the nature of the naval vessels that operate many communication equipment, various kinds of antennas such as communication antennas and TACAN for aircraft guiding are installed in the naval mast. In addition to the complex structure of the mast itself, the installed antenna is a factor that greatly increases the RCS. Therefore, the mast technology for reducing the RCS is being developed and applied in the United States and Europe.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.87-95
• /
• 2003

Submarine optical fiber cable construction consists of marine survey, PLGR(Pre Lay Grapnel Run), shore-end-work, laying the submarine optical cable. This PLGR is work to ease the cable lay safely in seabed, improve the performance of Plough and ROV (Remotely-Operated Vehicle) laying work, and protect laying equipment. This paper presents the design and implementation of real-time monitoring system for PLGR work in submarine optical fiber cable construction enterprise. In this paper, we designe overall real-time monitoring system. For this purpose, the modules such as serial multiport communication module, real-time processing module, environment configuration module, real-time graph and a printout modules are designed and implemented. For the validity evaluation of this paper, serial multi port communication module, data parsing, realtime graph output are implemented and tested.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.300-305
• /
• 2017

It is necessary to establish a system suitable for the driving vehicle so that it can effectively search for and modify various data anywhere and anytime by effectively linking communication with the computer system in the running vehicle and to control the equipment properly for smooth operation on a limited platform do. Also, vehicle CAN communication is used to extract system engine information, and data is transmitted using ZigBee for this information transmission. Therefore, OBD-II protocol, which is provided by the vehicle itself, is used for vehicle CAN to obtain vehicle status information and exhaust gas using various sensor information of the vehicle and O2 sensor value, and transmits it to the ZigBee main control system. In this study, we implemented a system that can reduce the battery load damage to the maximum by reducing the power consumption to the maximum, and to monitor the internal state of the vehicle through ZigBee communication with the embedded system for low power vehicles.