• Journal of the Mineralogical Society of Korea
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2016

We studied the heavy minerals in 46 surface sediments collected from the Central Yellow Sea Mud (CYSM) to characterize the type, abundance, mineralogical properties and distribution pattern using the stereo-microscopy, field-Emission scanning electron microscopy (FE SEM) and chemical analysis through the energy dispersive spectrometer (EDS). Heavy mineral assemblages are primarily composed of epidote group, amphibole group, garnet group, zircon, rutile and sphene in descending order. Epidote group and amphibole group minerals account for more than 50% of total heavy minerals. The minerals in epidote group, amphibole group and garnet group in studied area are epidote, edenite and almandine, respectively. When we divided the CYSM into two regions by $124^{\circ}E$, the eastern region contain higher contents of epidote and (zircon + rutile), which are more resistant to weathering but lower of amphibole, which is less resistant to weathering than the western region. Based on this results, it is possible to estimate that the eastern region sediments are transported for a long distance while western region sediments are transported for a short distance from the source area. In the future, the additional study on the heavy minerals in river sediments flowing into the Yellow Sea and much more samples for marine sediments must be carried out to interpret exactly the provenance and sedimentation process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.52-56
• /
• 1996

In this study, when natural mineral with Silica components(Zeolite & Mudstone) abundant in Korea used as an admixture for concrete, it is investigated that the properties of strength increase and economic effect compared with Silica Fume, the general admixture of high strength concrete.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.1
• /
• pp.75-78
• /
• 2003

This study was carried out to investigate the mineral content of the feces of the $5^th$ instar larvae in a few silkworm species such as a parent domestic silkworm (Jam134), a hybrid (Kumok-jam), the Japanese oak silkworm, and the Chinese oak silkworm. The major minerals of all silkworms throughout all $5^th$ instar larval period are K, P, Mg and Ca, and the result is consistent with the previous study of the mineral content in the mulberry leaves. Although the calcium content decreased sharply at $7^th$ day of the $5^th$ instar, the crude protein content significantly increased at the same age in both domestic silkworms, suggesting a direct relationship between feeding behavior of the silkworms at the larval period and mineral/protein contents. However, this trend was not observed in both oak silkworms. In the comparison of the mineral content among silkworm species, two domestic silkworms were significantly higher in the calcium content compared with two oak silkworms, and the hybrid Kumok-jam was further higher significantly than the feces of parental Jam 143. Excluding the calcium content, overall no significant content variation in other minerals was observed among four silkworm species studied in this study.

• Korean Journal of Plant Resources
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2017

Persimmon seeds contain considerable amounts of minerals, amino and organic acids, natural antioxidants and phenolic compounds. The objective of this study was to investigate quality characteristics and antioxidant potential of Korean persimmon seeds. The pH (4.88-4.94), color values, contents of minerals, free amino acids, organic acids, and phenolic compounds and DPPH free radical scavenging potentials of persimmon seed extracts significantly (p < 0.05) varied with the genotypes. This study showed that the seeds could be used as a source of different mineral elements (47.14-85.07 mg/kg) without any measureable amount of heavy metals such as arsenic, cadmium, lead and mercury. Similarly, considerable amounts of organic (1550.13-2413.08 mg/kg) and essential amino (50.85-54.03 mg/kg) acids and total phenolic compounds ($1227.91-1307.78{\mu}g$ gallic acid equivalent/g) were also found in the seed extracts, indicating their potential food value as a natural antioxidant. Results of the present study imply that prethanol-A, a food preservative, can be used as an effective extraction to obtain the minerals, organic and free amino acids, and phenolic compounds from the persimmon seeds, which possess a big potential to be commercially used in food, cosmetic and pharmaceutical industries.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.502-522
• /
• 2022

Clay minerals are natural materials that show widespread applications in various branches of science, including environmental sciences, in particular the remediation of water contaminated with various water pollutants. Modified clays and minerals have attracted the attention of researchers in the recent past since the modified materials are seemingly more useful and efficient for removing emerging water contaminants. Therefore, modified engineered materials having multi-functionalities have received greater interest from researchers. The advanced clay-based materials are highly effective in the remediation of water contaminated with organic and inorganic contaminants, and these materials show enhanced selectivity towards the specific pollutants. The review inherently discusses various methods employed in the modification of clays and addresses the challenges in synthesizing the advanced engineered materials precursor to natural clay minerals. The changes in physical and chemical properties, as investigated by various characterization techniques before and after the modifications, are broadly explained. Further, the implications of these materials for the decontamination of waterbodies as contaminated with potential water pollutants are extensively discussed. Additionally, the insights involved in the removal of organic and inorganic pollutants are discussed in the review. Furthermore, the future perspectives and specific challenges in the scaling up of the treatment methods in technology development are included in this communication.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2009

Arsenic and heavy metals leached out as a result of oxidation of tailings exposed to the surface pose a serious environmental contamination of mine areas. This study investigated how arsenic behavior is controlled by a variety of processes, such as oxidation of sulfides and formation or alteration of secondary minerals, based on mineralogical methods. The study was carried out using the tailing samples obtained from Nakdong mine located in Jeongseongun, Gangwondo. After separating magnetic and non-magnetic minerals using pretreated tailing samples, each mineral sample was classified according to their colors and metallic lusters observed by the stereoscopic microscope. Subsequently, the mineralogical properties were determined using various instrumental analyses, such as x-ray diffractometer (XRD), energy dispersive spectroscopy (EDS), and electron probe micro analyzer (EPMA). The literature review confirmed that various ore minerals were identified in the Nakdong ore deposits. In this study, however, there were observed a few original ore minerals as well as secondary and/or tertiary minerals newly formed as a result of weathering including oxidation. In particular, we did not recognize pyrrhotite which has been known to originally exist in a large abundance, but peculiarly colloform-type iron (oxy)hydroxides were identified, which indicates most of pyrrhotite has been altered by rapid weathering due to its large reactivity. In addition, a secondary scorodites filling the fissure of weathered primary arsenopyrites were identified, and it is speculated that arsenic is immobilized through such a alteration reaction. Also, we observed tertiary iron (oxy)hydroxides were formed as a result of re-alteration of secondary jarosites, and it suggests that the environment of tailing has been changed to high pH from low pH condition which was initiated and developed by oxidation reactions of diverse primary ore minerals. The environmental change is mainly attributed to interactions between secondary minerals and parental rocks around the mine. As a result, not only was the stability of secondary minerals declined, but tertiary minerals were newly formed. As such a process goes through, arsenic which was immobilized is likely to re-dissolve and disperse into surrounding environments.

• Geophysics and Geophysical Exploration
• /
• v.8 no.3
• /
• pp.218-223
• /
• 2005

This study considers to electrical resistivity characteristics for clay minerals types and contents in fractured and fault zone. The electrical resistivity is measured for an artificial agar specimen with clay minerals instead of a natural rock. The artificial agar specimen with clay minerals was special worked in study. The clay minerals used are Kaolinite and Montmorillonite in test, the clay mineral contents increases until $0\~40\%$ to the same specimen. As results, the electrical resistivity of the specimen decreased gradually as the clay mineral contents increases for all types of clay minerals. Montmorillonite shows remarkably lower resistivity than Kaolinite, although its clay content is fewer than that of Kaolinite. Also, a proposed experimental expression shows a good correlation coefficient as high as 0.89 or more in all clay minerals.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.1
• /
• pp.27-35
• /
• 2001

This study was carried out to investigate the mineral content in the regional, varietal and seasonal mulberry leaves. On average, mulberry leaf samples contained minerals in the order of potassiumi phosphorus, calcium, magnesium, iron and so on (2.494 g/100 g, 2.255 g/100 g, 1.835 g/100 g, 0.627 g/100 g, 0.0245 g/100 g DW, respectively). Calcium content was 19-fold and 4-fold higher than that of green tea and spinach, respectively, suggesting that mulberry loaves appear to be a calcium-rich food source. In the comparison of geographic samples of Cheongilppong variety, calcium bevel was highest in Youngchun sample (2.477 g/100 g) and highest potassium level in Suwon sample (2.962 g/100 g). In the geographic samples of YK209 variety, Jinju-City sample was highest in calcium content (1.509 g/100 g). Among wild mulberry loaves collected from Cheju Island and Tsushima, potassium level was highest in Bongge-dong, Cheiu City (3.865 g/100 g) and calcium level in Mitshshima Town, Tsushima (2.948 g/100 g). In the comparison of varietal samples collected in Suwon at the mulberry field of Dept. of Sericulture & entomology, Shinkwangppong variety was highest in the potassium levels although Keryangppong and Shinkwangppong were higher in calcium revel. In the comparison of seasonal samples of Cheongilppong, there was a rough trend of increase in some minerals up to July (e.g., calcium rind )potassium). Finding of the highest calcium and potassium contents in the wild mulberry (3.865 g/100 g and 2.948 g/100 g, respectively) rather than in the cultivated ones warrant that more focus should be paid to wild mulberry leaves to utilize their minerals effciently.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.217-227
• /
• 2023

Crystalline calcium carbonate (CaCO₃) occurs in various geological and aqueous environments as calcite, aragonite, and vaterite. These minerals also have practical applications in engineered settings. Synthetic methods of calcium carbonate have been developed for scientific research and technical applications. For example, these methods have become widely adopted for studying the formation of CaCO₃ minerals and (geo-)chemical processes involving these minerals in natural and engineered systems. Furthermore, these methods have the potential to be applied in various technical and biomedical fields. Water-based synthesis is particularly important for simulating the formation of calcium carbonate minerals in natural aqueous environments. This review paper describes the procedures and experimental conditions for water-based synthetic methods of each calcium carbonate polymorph, compares the morphological and structural features of the resulting crystals, and analyzes the crystallization mechanisms.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.4
• /
• pp.561-573
• /
• 2000

Knowledge concerning the nutritional requirements and nutritional problems of fanned deer is limited. Nutritional recommendations must be based on data from domestic ruminants and fanned deer. An understanding of the biology and adaptative characteristics of wild deer is essential for sensible application of sheep and cattle nutritional principles. Nutritional requirements of deer are generally separated into five categories: energy, protein, minerals, vitamins and water. Research on deer nutrition has primarily focused on energy, protein and minerals (phosphorus and calcium). Changes in the nutritional requirements that occur with gestation, lactation, breeding and antler growth should be coordinated with seasonal changes in nutrient availability from forage plants. This paper describes aspects of current knowledge of energy, protein, minerals, vitamins and water requirements. Nutritional problems of. fanned deer are described with recommendations for prevention or control. A comparison of production efficiency of deer, lamb, beef cattle and dairy cattle is included.