• 한국소음진동공학회논문집
• /
• 제13권8호
• /
• pp.598-604
• /
• 2003

In this paper a general solution method is presented to obtain the unbalance response orbit from the finite element based equations of motion of a gear-coupled two-shaft rotor-bearing system, whose shafts rotate at their different speeds from each other. Particularly, are proposed analytical solutions of the maximum and minimum radii of the orbit. The method has been applied to analyze the unbalance response of a 800 refrigeration-ton turbo-chiller rotor-bearing system having a bull-pinion speed increasing gear. Bumps in the unbalance response of the driven high speed compressor rotor system have been observed at the first torsional natural frequency due to the coupling effect of lateral and torsional dynamics. Further, the proposed analytical solutions have agreed well with those obtained by a full numerical approach. The proposed analytical solutions can be generally applied to obtain the maximum and minimum radii of the unbalance response orbits of dual-shaft rotor-bearing systems coupled by bearings as well.

• 산업공학
• /
• 제10권3호
• /
• pp.75-93
• /
• 1997

Unlike individual applications, it is extremely hard to obtain user requirements for group systems, since there exists very complicated dynamics in group. This may result in spreading a great amount of products with a broad range of contents. Thus, this study presents a comparative analysis of groupware products. As a result, these products have been categorized into three areas which include cooperation/document management systems, collaborative writing systems, and decision-making/meeting systems. While the systems reviewed here focus on the cooperation/document management systems, the other two areas will be dealt in details in part Ⅱ. The first area ends up with two large categories such as proprietary groupware products and intranet groupware products. However, it has been observed that there is a natural convergence between these two categories. Consequently, the comparative analysis has been performed in terms of functions provided on the two categories and a combined category. Each group of the functions has been divided into three parts which consist of basic functions, quasi-basic functions, and others. Such a decision has been made based on the frequency rate of the functions provided in the products. With a more strict rule, the basic functions comprise electronic mail, sanction, bulletin board, document management, scheduling, security, Web browser, and Internet connectivity. This study also provides a framework for integrated functional model of groupware systems. The basic functions are merged into the model. However, the model is so flexible that it can partially include the quasi-functions in addition to the basic functions. In the future, it is expected that a large number of products will stem from the modification of the functional model.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.375-385
• /
• 2016

Given the rapid progress made in understanding the dynamics of an offshore floating body in an ocean environment, the present study aimed to simulate ocean waves in a small-sized wave flume and to observe the motion of a cylindrical floating body placed in an offshore environment. To generate regular ocean waves in a wave flume, we combined a wave generator and a wave absorber. In addition, to precisely visualise the oscillation of the body, a set of light-emitting diode illuminators and a high-speed charge-coupled device camera were installed in the flume. This study also focuses on the spectral analysis of the movement of the floating body. The wave generator and absorbers worked well to simulate stable regular waves. In addition, the simulated waves agreed well with the plane waves predicted by shallow-water theory. As the period of the oncoming waves changed, the movement of the floating body was substantially different when tethered to a tension-leg mooring cable. In particular, when connected to the tension-leg mooring cable, the natural frequency of the floating body appeared suddenly at 0.391 Hz as the wave period increased.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1566-1577
• /
• 2018

This paper presents a stability analysis of AC-DC power system feeding a speed controlled DC motor in which this load behaves as a constant power load (CPL). A CPL can significantly degrade power system stability margin. Hence, the stability analysis is very important. The DQ and generalized state-space averaging methods are used to derive the mathematical model suitable for stability issues. The paper analyzes the stability of power systems for both speed control natural frequency and DC-link parameter variations and takes into account controlled speed motor dynamics. However, accurate DC-link filter and DC motor parameters are very important for the stability study of practical systems. According to the measurement errors and a large variation in a DC-link capacitor value, the system identification is needed to provide the accurate parameters. Therefore, the paper also presents the identification of system parameters using the adaptive Tabu search technique. The stability margins can be then predicted via the eigenvalue theorem with the resulting dynamic model. The intensive time-domain simulations and experimental results are used to support the theoretical results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권1호
• /
• pp.9-19
• /
• 2012

A set of equations of motion is derived for vibratory motions of an underwater cable connected to a moving vehicle at one end and with drogues at the other end. From the static analysis, cable configurations are obtained for different vehicle speeds and towing pretensions are determined by fluid resistance of drogues. Also the dynamic analysis is required to predict its vibratory motion. Nonlinear fluid drag forces greatly influence the dynamic tension. In this study, a numerical analysis program was developed to find out the characteristic of cable behaviour. The motion is described in terms of space and time coordinates based on Chebyshev polynomial expansions. For the spatial integration the collocation method is employed and the Newmark method is applied for the time integration. Dynamic tensions, displacements, velocities, accelerations were predicted in the time domain while natural frequencies and transfer functions were obtained in the frequency domain.

• 한국태양에너지학회 논문집
• /
• 제35권3호
• /
• pp.9-16
• /
• 2015

In order to support various studies for assessment of onshore and offshore wind turbine system including foundations, the land-based version of 2MW PMSG direct drive wind turbine has been analyzed using HAWC2 that account for the coupled dynamics of the wind inflow, elasticity, and controls of the turbine. this work presents the steady-state response of the system and natural frequency of the first thirteen structure turbine modes as a function of wind speed. Rotor, generator speeds, pitch angle, power production, thrust force, deflections of tower and blade are compared for one case below and one case above the rated wind speed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.60-68
• /
• 2012

본 연구에서는 미국 뉴욕주 로체스터시 소재 강합성 데크 트러스 보도교를 대상으로 사용성을 평가하기 위한 상시진동 실험(ambient vibration test)을 수행하였고 이를 해석적 방법에 의한 결과와 비교하였다. 교량전체에 대한 상시진동실험은 수치모델 작성 시 도입되는 여러 가정들에 대한 타당성을 평가하는데 있어서 유용한 방법이며, 교량의 고유진동수나 모드형상과 같이 구조 동력학에서 중요한 구조적인 변수를 결정하는데 있어 중요한 역할을 한다. 본 연구에서는 교량의 수직방향 및 수평방향 진동 특성과 변위를 측정하기 위하여 실제 교량에서 보행자에 의해 발생하는 진동을 입력하중으로 사용하였다. 교량 구조물에 대한 모델링을 위하여 3차원 유한 요소법을 사용하여 해석을 수행하였으며, 이를 통하여 현장실험 결과와의 유효성을 입증하였다.

• 한국자원식물학회지
• /
• 제17권3호
• /
• pp.248-256
• /
• 2004

천연도료 황칠자원을 보전하고 육성하기 위한 육종계획의 일환으로 한라산 황칠나무 천연집단의 식생구조, 공간분포 및 생육동태 등 생태적 특성을 조사한 결과, 중요치(Ⅳ)가 높은 수종은 구실잣밤나무, 서어나무, 황칠나무, 종가시나무, 가시나무, 동백나무, 당단풍 등인 것으로 조사되었으며 , 모든 조사구에서 공통적으로 출현한 수종은 구실잣밤나무와 서어나무 2종이었다. 층위별 황칠나무의 적산중요치는 상층에서 17.2%, 중층 12.9%, 하층 10.3%로 비교적 높은 우점도를 나타내고 있었으며, 분포형은 상층, 중층, 하층에서 확률분포하는 것으로 나타났다. 황칠나무 임분은 낙엽활엽수인 서어나무를 우점으로 하는 군집에서 종가시나무, 구실잣밤나무 등의 상록활엽수를 우점으로 하는 군집으로 진행되는 천이단계에 있었으며, 황칠나무는 이들 임분에서 주로 상층의 아우점종이거나 중층의 우점종으로 나타났다. Morisita's index를 통한 공간분포는 치수(seedling)와 어린개체 (sapling)들은 대체로 모수로서 추정되는 성숙목으로부터 떨어진 곳에 집중분포하는 경향을 보였으나, 성숙목(Mature tree)은 규칙 분포하는 양상이었다. 결론적으로, 황칠나무는 다른 상록활엽 수들과 동반하여 집단 확산이 일어나며 , 집단의 확산을 위한 치수의 발생과 생장에 있어서 주변의 임분구조에 큰 영향을 미치는 것으로 나타났다. 또한, 개체군의 동태를 예측한 결과, 낮은 직경급의 밀도가 높고 높은 직경 급의 밀도가 낮은 전형적인 역J자형 분포를 보였다.

• ALGAE
• /
• 제19권3호
• /
• pp.257-270
• /
• 2004

In order to clarify the structure and seasonal dynamics of warm tolerant benthic marine algal community in Korea, the species composition and biomass of marine algae at the discharge canal of Uljin nuclear power plant on the East Coast of Korea were investigated seasonally from February 1992 to October 2000. 107 species of marine algae were found at the discharge canal during the past nine years. In general, the number of species observed was abundant in spring or summer and less in autumn or winter. 27 species (4 blue-green, 5 green, 6 brown and 12 red algae) of marine algae occurred more than 1/ 6 frequency and thus can be categorized as warm tolerant species. Among these, one brown (Dictyota dichotoma) and four red algae (Gelidium amansii, Anphiroa ephedraea, Hydrolithon sargassi, Marginisporum crassissimum) are recorded as warm tolerant marine algae for the first time in Korea. Padina arborescens, Anphiroa zonata and Corallina pilulifera were common species found more than 75% frequency. Seasonal fluctuations of mean biomass were 0-1,330 g dry wt m^(-2) and dominant species in biomass were Corallina pilulifera (contribution to a total biomass proportion 34%), Anphiroa zonata (23%), Padina arborescens (18%) and Sargassum micracanthum (11%). The red algae appeared as predominant algal group at the discharge canal of Uljin nuclear power plant in the qualitative and quantitative aspects. The green algae such as Enterornorpha compressa appeared rather frequently at the discharge canal, but the biomass proportion was very low, in contrast to Kori nuclear power plant where there was definite green algal dominance. Differences in algal communities developed at the discharge canals of Uljin and Kori nuclear power plant on the East Coast of Korea, particularly biomass proportions of green algae, can probably be related to local environmental factors such as water velocity through the canal and natural seawater temperatures.

• 한국지진공학회논문집
• /
• 제7권2호
• /
• pp.1-7
• /
• 2003

모우드 중첩법은 구조 동역학 문제의 선형 거동해를 위해서 가장 일반적으로 사용되고 있다. 이러한 모우드 중첩법의 큰 장점은 보통 저차 모우드의 작은 수 만으로 구조물의 거동해석이 충분하다는 것이다. 그러나 많은 수의 자유도를 갖는 거대 구조물에서는 수렴속도가 느리고, 정확한 모우드 중첩법이 되기 위해서는 많은 수의 모우드 수가 필요하게 된다. 모우드 중첩법의 부정확성은 사용되는 모우드 수의 절삭에 의해서 발생된다. 이러한 단점들은 모우드 가속도법에 의해서 극복될 수 있다. 조화하중을 받는 단순보에 대하여 예제해석을 수행하였으며, 두 방법에 의해서 절점 변위들의 수렴성을 비교하였다. 비교적 낮은 주파수를 갖는 하중에 대하여 모우드 가속도법은 저차 모우드 1개만으로도 좋은 결과를 얻을 수 있었으며, 이 방법은 수치해석에 있어서 더 경제적이며 또한 정확한 해가 된다.