• 복식문화연구
• /
• 제9권2호
• /
• pp.188-206
• /
• 2001

In 1990's, many collections, showing trends of restoration, took the hippie fashion as their main theme. Therefore, this study investigates the aspects of the hippie trend focusing on style, materials, colors shown in Mlan Collection, New York Collection, London Collection, Paris Collection, Tokyo Woman's Collection, and street fashions. 1. In style, the collections and street fashions exhibited layered look. 2. In materials, natural fibers were preferred s in 1960's . 3. In colors, natural hues such as black, white, and brown were primarily used, whereas vivid colors were used as accent. 4. In patterns, floral patterns were most extensively used as the flower is the symbol of Hippie. Animal patterns were also used. 5. In accessories, the Indian bred, a symbolic accessory of Hippie, was used with various materials. The hippie fashion in 1990's appeared not s a total fashion, but as an ancillary associate has the role of accentuation like hair-style, make-up, acessaries, etc.

• 한국소음진동공학회논문집
• /
• 제16권3호
• /
• pp.247-254
• /
• 2006

This paper (Part II) provides the application results of the method presented in a companion paper (Part I) where the dynamic equation for rotating polar orthotropic disk is formulated and its solution method is considered. The natural frequencies and critical speed of polycarbonate CD are calculated to validate the present method and are shown to by very accurate. The critical speeds of typical GFRP and CFRP CD's are computed by aligning the fibers in radial and circumferential directions. The radially reinforced CFRP CD is shown to have the five times higher critical speed than that of the polycarbonate CD. The natural frequencies and critical speeds of disks with various elastic modulus ratios are obtained. The results show that the radially reinforced disk is more effective in increasing critical speed than the circumferentially reinforced disk.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• Carbon letters
• /
• 제7권4호
• /
• pp.245-248
• /
• 2006

Thin films of carbon-nano materials (CNMs) of different morphology have been successfully deposited on ceramic substrate by CVD at temperatures $800^{\circ}C$, $850^{\circ}C$ and $900^{\circ}C$ using plant based oils in the presence of transition metal catalysts (Ni, Co and Ni/Co alloys). Based on the return and insertion loss, microwave absorption properties of thin film of nanocarbon material are measured using passive micro-Strip line components. The result indicates that amongst CNMs synthesized from oil of natural precursors (mustered oil - Brassica napus, Karanja oil - Pongamia glabra, Cotton oil - Gossipium hirsuta and Neem oil - Azadirachta indica) carbon nano fibers obtained from neem's seed oil showed better microwave absorption (~20dB) in the range of 8.0 GHz to 17.90 GHz.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.29-30
• /
• 2010

Cotton fabric is usually dyed with anionic dyes such as direct and reactive dyes. Naturally, there is no affinity for basic dyes to cotton fiber. In this study, to improve the dyeability of cotton fiber with cationic dyes, the fabric was pretreated with air plasma and grafted with acrylic acid to create acidic groups on the surface of cotton fibers. The grafted samples were dyed with natural cationic dye extracted from roots of berberis vulgaris. The effect of plasma treatment and grafting of acrylic acid on the color strength of cotton fabric was studied.

• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1211-1226
• /
• 2016

In this study, free vibration and damping characteristics of composite beams with holes are investigated, experimentally and numerically. Two types of samples with different fabrics are used: unidirectional and woven. The effects of diameter, number and location of circular holes on the vibration characteristics of composite beams are examined. The effects of rotation angle and minor to major diameter ratio of the elliptical hole are also investigated numerically. Moreover, the mode shapes of all types of beams are obtained numerically. According to the results, the natural frequency decreases with increasing hole diameter but increases very little with increasing the distance between the hole center and the clamped end. Damping ratio decreases by increasing the diameter of hole. But it fluctuates by increasing the diameters of holes of beam having three holes. Furthermore it decreases by increasing the distance between hole center and clamped end except for the range 50 mm to 100 mm.

• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.789-798
• /
• 2020

The effect of Chitosan (CS), Carbon Nanotube (CNT) and hybrid (CS-CNT) fillers on the natural frequency of drilled composite plate is investigated by experimentally in this study. The numerical validation is also made with a program based on Finite Element Method (SolidWorks). Nine types filled and one neat composite plates are used in the study. The fillers ratios are 1% CS, 2% CS, 3% CS, 0.1% CNT, 0.2% CNT, 0.3% CNT, 1% CS+0.3% CNT, 2% CS+0.3% CNT, 3% CS+0.3% CNT. The specimens cut to certain sizes by water jet from the plates 400 mm × 400 mm in dimensions. Some of them are drilled in certain dimensions with drill. The natural frequency of each specimen is measured by the vibration test set up to determine the vibration characteristic. The vibration test set up includes an accelerometer, a current source power unit, a data acquisition card and a computer. A code is written in Matlab^® program for the signal processing. The study are investigated and discussed in four main points to understand the effect of the fillers on the natural frequency of the composite plate. These are the effect of fillers contents and amounts, orientation angles of fibers, holes numbers and holes sizes. As results, the natural frequency of the plate with 1% CS and 0.1% CNT hybrid filler is lower than those of the plates with other fillers ratios for 45° orientation angle. Besides, in the composite plate with 0° orientation angle, the natural frequency increases with increasing the filler ratio. Moreover, the natural frequency increases until a certain hole number and then it decreases. Furthermore, the natural frequency is not affected until a certain hole diameter but then it decreases.

• Animal cells and systems
• /
• 제1권2호
• /
• pp.371-379
• /
• 1997

To investigate the movement of sperm head and the role of sperm neck in forward sperm motility in the Korean striped field mouse, Apodemus agrarius coreae, the morphological characteristics of the cauda epididymal spermatozoa were examined by light microscopy and scanning and transmission electron microscopy. Spermatozoa of A. agrarius coreae were characterized by the conspicuous shape of the acrosome and the long tail compared with those of other rodents. Total length of the sperm was $133\mu{m}$. The sperm head had a curved falciform shape. The head was 8.0${\mu}$m in length, and about 4.0 ${\mu}$m in width. The shape of acrosome had an openerlike form. The sperm tail (125 ${\mu}$m) consisted of four major segments: neck (0.5 ${\mu}$m), middle piece (29.5 ${\mu}$m), and principal piece plus the end piece (95 ${\mu}$m). The outer dense fibers were arranged in a horseshoe fashion, and No. 1, 5, 6, and 9 of the outer dense fibers were larger than the others. The mitochondrial bundles of middle piece were composed of a pair of arms, which surrounded the axone of the middle piece by the 45 0 angled helical structure. The total number of mitochondrial gyres was 188. In particular, the microfilament structures existed in plasma membrane of the sperm, which was adjacent to the acrosomal region on the nuclear membrane. The segmented columns were surrounded by microfilament structures, and the microfilament bundles were adjacent to the outer membrane of the first mitochondria of middle piece. This study presents for the first time the existence of microfilament structures within the plasma membrane of sperm which is located from the adjacent acrosome region to the connecting piece in sperm neck of Korean striped field mouse, Apodemus agrarius coreae. The present result suggests that the constriction and extension of microfilament in sperm neck as well as the wave-movement of sperm tail may play a role in the movement of sperm head.

• 패션비즈니스
• /
• 제14권3호
• /
• pp.128-145
• /
• 2010

Nowadays people are turning to have a more intimate environment-friendly lifestyles. In the clothing industry they are focusing on making products that are more human-friendly and not harmful to the environment. In the midst of the spread of consumption research is being done to develop manufacturing textiles that do not induce pollution. For instance, advantages of the natural textile fibers, cotton, silk, and ramie, have been newly recognized in terms of environment-friendliness, Together with these fibers, the natural high molecular materials, such as chitosan and hyaluronic acid, have found new roles in the application sectors of human-friendliness and environment-friendliness. Products using these substances and processing methods can make the products more wearable, have high sensitivity, make people feel aesthetic appreciation for the products, and make them appreciate the value of a more healthier environment. In a survey according to subjects in their 20s and 30s, their preferences towards their consciousness and awareness of the development of materials as well as their attitude towards environment-friendly products were determined as a conclusion. It was shown that consumers that are more conscious about the interest of the environment as well as the problems concerning the environment were more intent on buying products that were environmentally-friendly. Women have shown more active and positive attitudes towards the importance of the awareness of the environment in comparison with men. Generally, consumers in their 20s and 30s preferred the feel of materials that were less than 1% concentration process than those of materials that were 1% concentration process. To increase the "rustly" feeling of the materials, it was found that 1% concentration process was suitable for manufacturing.

• 한국의류학회지
• /
• 제1권1호
• /
• pp.25-29
• /
• 1977

The warmth retentivity of natural and syntheic waddings as bedding stuff, and further, the machanism of heat transmission through conduction, radiation and convection were analysed. The materials used were cotton, silk, and wool as natural waddings, and polyamide, polyester, regular acrylic, conjugate acrylic, regular polyprepylene and conjugate polypropylene as synthetic waddings. The results of this study are as follow: 1. The warmth retentivity is highest in silk. Following silk in descending order is cotton, conjugate acrylic, polyester, regular acrylic, wool, polyamide, conjugate polypropylene and regular polypropylene. There is not any significant relationship between warmth retentivity and the conductivity of the fibers. 2. Transmission by radiation through the fiber waddings is highest in conjugate polypropylene. Following conjugate polypropylene in descending order is regular polypropylene. polyester. polyamide, conjugate acrylic, regular acrylic, wool, cotton, and silk. This is seen to be in nearly reversed order to the abovementioned order of warmth retentivity. In this respect, warmth retentivity with loose fibreous material as in the case of bedding stuff is primarily affected by the interceptive function of the fibers in heat radiation. 3. Warmth retentivity becomes lower with increasing air content of the waddings. This is because heat transmission by radiation incrases as air content increases. The air content increase is due to the fact that the air is unable to intercept heat radiation. In addition, heat transmission accelates in proportion to the increase in convection as the air gap enlarges.