• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.2
• /
• pp.9-18
• /
• 1986

For identification and apportionment of sources emitting particulate matters in environment, the multi-elemental characterization of size-density fractionated particulate matters was carried out. Eight types of samples were tested; soil, flyash released from burning of bunker-Coil, diesel oil, coal, and soft coal, urban road-way dust, urban dust fall, and airborne particulate matter. The fractions of particulate matters obtained by heavy liquid separation methos with a series of dichloromethane-bromoform were then analyzed using atomic absorption spectrophotometry for Ni, Cr, Cu, An, Fe, Al, and Mg. Each sample showed a different concentration profile as a function of density, and a number of useful conclusions concerning characterization of elemental distribution were obtained. From the density distributions of elements in soil, the maximum value was found for all elements in the density range of 2.2 $\sim 2.9g.cm^{-3}$, including the density of $SiO_2$. However, the distribution of metallic compounds with the density lower than $2.2g.cm^{-3}$ was prevalent in urban roadway dust, urban dust fall, and airborne particulate matter. And the density distribution curves of these urban dusts also have the higher distribution at the density of 2.2 - 2.9g.cm^{-3}$, including the density of wind-blown silica. This tendency generally was prevalent in the natural source elements, such as Al, Fe, Mn, and Mg. The maximum values were found in the density ranges of 1.3 $\sim 2.2g.cm^{-3}$ from the density distribution of elements in oil fired flyash. These distributions of anthropogenic source elements, such as Zn, Ni, Cu, and Cr were higher predominately than those of natural source elements. And the higher distribution was found in the density range of $2.2 \sim 2.9g.cm^{-3}$ from the density distribution of elements in coal and soft-coal fired flyash. These distributions showed similar patterns to soil. But anthropogenic source elements somewhat predominated at the density ranges of $1.3 \sim 2.2g.cm{-3} and 2.9g.cm^{-3}$ to soil. Therefore the higher distribution of anthropogenic source elements in the density ranges of $1.3 \sim 2.2g.cm^{-3} and 2.9g.cm^{-3}$ was considered as anthropogenic origin.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.5-16
• /
• 2013

As rapid aging society comes and people have growing interest in health, health issue has become an important value in modern society. The demand for healthy and comfortable residential environment has also increased and people themselves have made effort to build healthy residential environments. Therefore, the purpose of this study is to identify the characteristics of health housings planned and built by ordinary people. The study analyzed the contents of healthy houses that were broadcasted on TV with the title of healthy houses. Analyzed items were the planning elements and motives of building such healthy houses reflected in the samples of respective healthy houses. The result of the study revealed there were many examples of housings for healing purpose and the planning elements were in the order of architecture elements, natural elements, decoration elements, other elements and technical elements. While the experts usually put priority on technical elements for developing of healthy houses, ordinary people put priority on natural elements. This study comprehensively presents the overall characteristics of healthy houses which ordinary people pursue, on empirical basis. It is expected that this study will inspire to think about the desirable direction of healthy houses for the residents by comparing with or along with the concepts of housings that experts pursue.

• Nuclear Engineering and Technology
• /
• v.37 no.5
• /
• pp.503-510
• /
• 2005

An instrumental neutron activation analysis was used to measure the concentrations of about 24 elements associated with airborne particulates (PM10) that were collected in the most polluted urban region of Daejeon city, Korea from 2000 to 2002. Using the measurement data for various elements, both the extent of elemental pollution in the study area and the seasonality in their distribution characteristics were examined. Examinations of their distribution patterns indicated that most elements with crustal origin tend to exhibit seasonal peaks during spring, while most elements with anthropogenic origin tend to exhibit seasonal peaks during fall or winter. In order to explain the factors regulating their mobilization properties, the data were processed by a factor analysis. Results of the factor analysis suggested competing roles of both industrial and natural source processes, despite that the study site is located at a downwind position of the industrial complex. Based on the overall results of this study, it is concluded that the site may be strongly impacted by man-made sources but the general patterns of elemental distributions in the study area inspected over a seasonal scale are quite consistent with those typically observed from natural environment.

• Computers and Concrete
• /
• v.23 no.4
• /
• pp.235-243
• /
• 2019

The discontinuous Galerkin method (DGM) has become widely used as it possesses several qualities, such as a natural ability to dealing with discontinuities. DGM has its major success related to fluid mechanics. Its major importance is the ability to deal with discontinuities and still provide high order of approximation. That is an important advantage when simulating cracking propagation. No remeshing is necessary during the propagation, since the crack path follows the interface of elements. However, DGM comes with the drawback of an increased number of degrees of freedom when compared to the classical continuous finite element method. Thus, it seems a natural approach to combine them in the same simulation obtaining the advantages of both methods. This paper proposes the application of the combined continuous-discontinuous Galerkin method (CDGM) to crack propagation. An important engineering problem is the simulation of crack propagation in concrete structures. The problem is characterized by discontinuities that evolve throughout the domain. Crack propagation is simulated using CDGM. Discontinuous elements are placed in regions with discontinuities and continuous elements elsewhere. The cohesive zone model describes the fracture process zone where softening effects are expressed by cohesive zones in the interface of elements. Two numerical examples demonstrate the capacities of CDGM. In the first example, a plain concrete beam is submitted to a three-point bending test. Numerical results are compared to experimental data from the literature. The second example deals with a full-scale ground slab, comparing the CDGM results to numerical and experimental data from the literature.

• Structural Engineering and Mechanics
• /
• v.4 no.5
• /
• pp.513-527
• /
• 1996

In this paper, both an approximate expression and an exact expression for the contribution factor of an element to the natural frequency of the finite element discretized system of a structure in general and a membrane in particular have been derived from the energy conservation principle and the finite element formulation of structural eigenvalue problems. The approximate expression for the contribution factor of an element is used to predict and determine the elements to be removed in an iteration since it depends only on the quantities associated with the old system in the iteration. The exact expression for the contribution factor of an element makes it possible to check whether the element is correctly removed at the end of an iteration because it depends on both the old system and the new system in the iteration. Thus, the combined use of the approximate expression and the exact expression allows a considerable number of elements to be removed in a single iteration so that the efficiency of the evolutionary structural optimization method can be greatly improved for solving the natural frequency optimization problem of a structure. A square membrane with different boundary supports has been chosen to investigate the general evolutionary path for the fundamental natural frequency of the structure. The related results indicated that if the objective of a structural optimization is to raise the fundamental natural frequency of the structure to an optimal value, the general evolutionary path during its optimization is that the elements are gradually removed along the direction from the area surrounded by the contour of the highest value to that surrounded by the contour of the lowest value.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.1
• /
• pp.113-127
• /
• 2018

This study comprehends that the landscape of Ipsan Village is the accumulated output of the landscape management and social behavior by the historic personages through the reference research and field surveys. And the study sorted out the over-layered landscape characteristics of Ipsan Village by analyzing the dispersed landscape elements as follows. First, right before the start of Japanese invasions to Korea(1592-98), Tamjin(耽津) An(安) Family moved into Ipsan and started establishing the a single clan village. At a site with mountain background and facing the water(背山臨水), the village used to be a typical farming one with an organically planned road-system and housing area following the traditional order. However, the landscape has changed drastically since the 20th century with the construction of banks, roads and readjustment of arable land etc. Second, the original landscape, which can be figured out through the 'Gosanjaesibyukgyeong(高山齋十六景)' in the 18th century, shows its harmony with natural landscape: mountain & valley, stream & field, traditional trees, etc, cultural landscape: village, well, spring, etc, and momentary landscape: seasons, time, weather phenomena, sound, behavior, etc. Third, based on the second, 16 natural landscape elements: mountain & stream, planting, etc. and 25 cultural landscape elements: housing spaces, self-cultivation & ceremony spaces, community spaces and modern education & enlightenment spaces were selected and interpreted as landscaping meanings. Fourth, the over-layered landscape which stems from the compositive functions and inter-connectivity of landscape elements which consists Ipsan Village is regarded as 'Natural geographical and Fungsu landscape', 'Rural production and livelihood landscape', 'Confucian ceremony and symbolic landscape' and 'Modern education and enlightenment landscape.'

• Economic and Environmental Geology
• /
• v.36 no.4
• /
• pp.275-284
• /
• 2003

We collected the samples of stream sediments from primary channels in order to establish natural background of major and minor elements for geologic units in the Gurye area. Stream sediments samples having no possibility of contamination effect and representing drainage basins composed of uniform geology, were collected from April to May in 1999, the chemical analysis of which was carried out. The tolerable level was used to investigate the enrichment degree of harmful elements. The contents of Ni and Cr exceeded the tolerance level in some sections. The tolerance level excess of those elements was regarded as the effect of the metamorphic rock which constituted the bed rock of the area. In order to identify the comprehensive enrichment pattern, the tolerable level was used in calculating the enrichment index. The enrichment index of harmful heavy metals showed that Granite gneiss area is 0.39, Porphyroblastic granite gneiss area 0.32, Biotite gneiss area 0.42, Migmatitic gneiss area 0.41, Tuff area 0.30, Andesite area 0.46, Conglomerate area 0.42, and Granite area 0.26. Those results showed that natural background of Gurye area had not been exposed to harmful heavy metal elements.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.105-109
• /
• 2004

In this study, we analyzed the influences of appraising elements such as weight, color and clarity of natural diamonds on their value in the round brilliant cut diamonds. To analyze the influences of these elements on the value of diamonds, data were made from a Rapaport Diamond Report which is the most reliable source of diamond prices. As the result of this study, it is clearly understood that color and clarity equally influenced the value of diamonds as a whole, but there were some partial variations according to grades of both elements. That is, value of clarity was higher than that of color in higher-quality diamonds but value of clarity was lower than that of color in lower-quality diamonds. Also, value of diamonds were closely co-related by three main elements which were weight, color and clarity, but weight was the most influencing element on the value of natural diamonds.

• Korean Institute of Interior Design Journal
• /
• v.26 no.2
• /
• pp.101-109
• /
• 2017

The food and beverage spaces of modern industrial society have transformed from a simple space for meals into a space of culture, communication and experience as society becomes more complex and diverse along side economic growth. An interior designer who is rapidly rising on this flow of change is Yukio Hashimoto. While working for interior design firm Super Potato, which highlights food and beverage spaces, he was much affected by the expression methods of representative designer Takashi Sugimoto, who makes use of natural elements. By using these expression methods that make use of natural elements in his own creation of spatial ambience and elements of experience and by adding his own differentiated expression methods, he emphasizes an effective spatial expression for food and beverage spaces. The design characteristics of Yukio Hashimoto's food and beverage spaces are as follows. First natural elements like light and water are recreated as memories of nature after being established through a methodology that allows these elements to penetrate his own thoughts. Second, he pursues a hybrid design through the harmony between past tradition and current expressive techniques. Third, he expresses objets of light through a formative sense of shape expressed with light.. Fourth, he establishes an axis in the interior space by light and structure and endows a strong directionality that induces symmetric characteristics, gaze, and movement.. Fifth, he installs lights at the bottom of weighty materials and expresses a sense of floating by light. Sixth, he uses an illusion technique that makes use of the ambiguity and depth of space resulting from reflecting materials like mirrors. The study hopes that such design expression characteristics of food and beverage spaces can be used as data for interior designers to apply and develop a new design vocabulary.

• Proceedings of the Zoological Society Korea Conference
• /
• 2003.08a
• /
• pp.209.3-209
• /
• 2003

No Abstract, See Full Text