• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.110-116
• /
• 1981

Soil surface charge which manipulates some important soil physico-chemical properties such as nutrient and water holding abilities, colloidal stability and soil erosion was investigated in wide range of soil pH, using soils developed originally from same volcanic ash deposit but under different rainfall condition in Hawaii. The results can be summarized as follows : 1. Ustollic Camorthid (Kawaihae soil) which was developed under the lowest rainfall (less than 500 mm/yr) revealed low Z.P.C. (4.5-5.0) and less dependence of net charge on concentration of indifferent electrolytes. 2. Typic Hydrandepts (Akaka and Hilo soils) which were developed under the high rainfall (3050-7600 mm/yr) showed the Z.P.C. in between 5.5-7.0 and high dependence of net charge on concentration of indifferent electroytes. 3. It was found by X-ray diffraction together with total chemical analysis that amorphous materials were dominant (above 6.0%) in Typic Hydrandepts while dehydrated halloy-site (1 : 1 clay minerals) was dominant (45-50%) in Ustollic Camorthid. 4. In spite of little difference in particle size distribution of the soils, the difference of specific surface area was remarkable showing the order of Akaka (289) > Hilo (268) > Kawaihae (93). 5. It was evident, taking account of apparent field pH values, 5.2 of Akaka, 5.5 of Hilo and 7.0 of Kawaihae soil, respectively, that Akaka, and Hilo soils would show either positive or near zero (+ or 0) of ${\Delta}pH$ while Kawaihae soil would exhibit negative (-) of ${\Delta}pH$ at natural field condition.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.3
• /
• pp.192-196
• /
• 2003

Objective of this study was to investigate the influences of harvest index and percolation water quality as irrigated the discharge waters from an industrial and a municipal wastewater treatment plants and seawater (1:5 seawater: tap water) as alternative water resources during tillering stage for drought stress. There were four different treatments such as the discharge water from an industrial (textile dyeing manufacture plant) wastewater treatment plant (DIWT), discharge water from the municipal wastewater treatment plant (DMWT), seawater (1:5) and groundwater as a control. For the initial chemical compositions of alternative waters, it appeared that higher concentrations of COD, $Mn^{2+}$, and $Ni^+$ in DIWT were observed than reused criteria of other country for irrigation, and concentrations of $EC_i$, Cl, and $SO_4$ in seawater were higher than that for irrigation. Harvest index was not significantly different between DIWT and DMWT with different irrigation periods in two soil types, but that of seawater (1:5) is decreased with irrigation periods in clay loam soil and not different between 10 days and 20 days of irrigation periods in sandy loam soil. For percolation water qualities, values of sodium adsorption ratio (SAR) are increased with prolonging the irrigation periods of seawater (1:5) and DIWT, but those of DMWT were almost constant through the cultivation periods regardless of the irrigation period in both soil types. EG of percolation waters is eventually increased with prolonging days after irrigation regardless of irrigation periods in both soil types. Therefore, it might be concluded that there was potentially safe to irrigate the discharge water from municipal wastewater treatment plant relative to harvest index, SAR and $EC_i$ values of the ground water through the rice cultivation period at tillering stage for drought period.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.39-44
• /
• 2005

A sheet type of green body was made with the mixture of 60 wt% red clay, 20 wt% fly ash, and 20 wt% stone sludge. Indentations were made on the surfaces of sheets to investigate fracture rate of 1 to 5 mm artificial light-weight aggregates by various drying, breaking, and forming methods. Drying methods of green bodies were natural, electric oven, microwave, and fast drying by torch. Breaking methods of green bodies were ballmill Ⅰ, ballmill Ⅱ, free dropping in the box, and mechanical breaking with roller mill. The depth and width of indent on the surface of the sheet were varied and the thickness of green bodies was also changed to investigate effects of indentation on fracture rates. The highest fracture rate of 42 % among the various drying methods was obtained by microwave drying for 210 sec and the highest fracture rate of 65 % among the various breaking method was obtained by ballmill Ⅱ method. In forming method, an yield of larger aggregates than Ф = 5 mm decreased and that of smaller aggregates than Ф = 5 mm in creased with increasing depth of indentation (only in 3 mm thick green body)and with increasing thickness of green body. The size of aggregates was most homogeneous (by judging from the measurement of aspect ratio of 1 to 5 mm aggregates.) when 3 mm thick green body was rapidly dried by torch and was broken by ballmill Ⅱ method.

• Journal of the Korean earth science society
• /
• v.27 no.2
• /
• pp.198-208
• /
• 2006

To investigate the provenance of outer-shelf mud patch in the East China Sea, the geochemical compositions were analyzed and compared with those of Chinese rivers sediments. The mud sedimentary facies are distributed in the central region and sandy mud facies are also widely distributed around the study area. The major elements (Fe, Mg, K, Ti, and Mn) show strong positive correlation with Al, and trace elements also indicate the same characteristics; hence, clay minerals are likely to be the promising host for those elements. The high concentration of Fe, Ti, and Mn elements are found in the western middle part near the Changjiang estuary, indicating that it seems to result from the influence of the Changjiang River. Elemental ratios including Sc/Al, Ti/Nb, Th/Sc, Cr/Th, Nb/Co, and Th/U were thus used as provenance indicators to identify the sediment origins of the East China Sea. The discrimination diagrams clearly show that most of the sediment in the northern part are originated from the Huanghe River, while the muddy sediments in the western part near the Changjiang estuary might come from the Changjiang River, suggesting that the outer-shelf muddy sediments of East China Sea are originated from diverse sources.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.315-320
• /
• 2002

In order to improve some problems such as contamination of undesirable mold, mycotoxin production and excessive drying on the surface of traditional meju. Control meju without koji and capsule type meju(CM) coated with soybean mixture containing 0.5%, 1% and 2%(w/w) R. oligosporus koji were dried at room temperature (10∼15$^{\circ}C$) for 3 days. Control meju I was fermented in outdoor for 27 days. Control meju IIand CMs were fermented in Korean yellow clay room at 25$^{\circ}C$ for 7 days under 80% relative humidity as first step, and then fermented in outdoor (average temp. 2.7$^{\circ}C$, December) for 20 days as second step. The moisture content of CMs were higher than that of control meju I to the range of 2.88∼7.55%(w/w). pH and titratable acidity in CMs were similar to control group. Amino type nitrogen content in CMs(800.80, 816.0, 901.60 mg%) were 2.2∼2.6 times higher than that in control meju I (347.2 mg%). Reducing sugar content in CMs(2.78∼3.13%) was similar to control meiu I (2.10%) and control meju H(2.31%). Lightness(L) value of control meju I was higher than that of control meju IIand CMs.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.1
• /
• pp.44-50
• /
• 2008

The cultivation boundary areas and biological activator efficacies of Vitex rotundifolia, Tetragonia tetragonoides and Glehnia littoralis were investigated. Investigation of coastal areas revealed the East and West cultivation boundary areas of Vitex rotundifolia and Gelhnia littoralis to be the Taean Peninsula, Taean-gun and Gangwon-do, Donghae-City. The East and West coastal cultivation boundary areas of Tetragonia tetrragonoides are Jeollanam-do and Kyeongsangbuk-do, Ulleung-gun. The natural habitat is less than 200 m from the coastal area. Most of the Vitex rotundifolia, Tetragonia tetragonoides and Glehnia littoralis grow naturally in a region of mixed sand, clay and loam, in direct sunlight. No dominant vegetation was located. To analyze anti-inflammatory efficacy, RAW 264.7 cells were used. Vitex rotundifolia, Tetragonia tetragonoides and Glehnia littoralis inhibited inflammation by 37%, 12% and 10% in $100{\mu}g/m{\ell}$, respectively. However, the anti-inflammatory efficacy of Glehnia littoralis was invalid. Analysis of anti-cancer activity was accomplished using HL-60 cells. Glehnia littoralis revealed 60% and 72% inhibition activity in $100{\mu}g/m{\ell},\;and\;200{\mu}g/m{\ell}$ respectively. No cytotoxicity inhibition activity was investigated in Vitex rotundifolia and Tetragonia tetragonoides.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.2
• /
• pp.80-85
• /
• 2005

This study, Using Pusan clay, examined a relationship between Dynamic and Static Liquid Tests. The Static Liquid Tests were carried out based on BS and JIS. The results of the study are summarized as follows. (1) The result of the Dynamic Liquid Limit Test showed that the liquid limit values of Natural condition soil were greater than those of oven-dried soil by $4\%\~15\%$. (2) The liquid limit value of the Static Liquid Limit Test was greater than that of the Dynamic Liquid Limit Test by $2\%\~9\%$. The following equations show the relationship between tile two values. WL, Fall(JIS)=0.961$\cdot$WL, Cas+4.209, WL, Fall(BS)=0.969$\cdot$WL, Cas+5.024, (3) The liquid limit value of BS was greater than that of JIS by $1\%\~6\%$. The following equation shows the relationship between the two values. WL, Fall(BS)=0.976WL, Fall(JIS)+2.638.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.113-121
• /
• 2012

The mechanical characteristics of a fault gouge from near Mt. Kumjung in Kumjung-Gu, Busan, were estimated from laboratory tests on different joint models. Fault gouge samples and joint samples in biotite granite were obtained from boreholes in the study area that had penetrated small faults associated with the Dongnae and Yangsan faults. XRD and SEM analyses revealed that for the fault gouge consists of several clay minerals with tabular structure (kaolinite, montmorillonite, illite, sericite), which could cause the considerable reduction of shear strength when wet. The shear strength of the fault gouge was obtained from direct shear tests of the fault gouge itself and from direct shear tests of several natural/artificial joint surfaces coated with fault gouge. The results indicate that the reduction of shear strength is more abrupt for the joint surfaces coated with fault gouge compared with uncoated joint surfaces, and that the friction angle of the fault gouge between joint surfaces is much lower than the internal friction angle of the fault gouge itself. Fault gouges in contact with rock, therefore, could have a stronger negative effect on the stability of structures in rock masses than the fault gouge itself.

• The Korean Journal of Pesticide Science
• /
• v.2 no.2
• /
• pp.113-118
• /
• 1998

The efficacy of conidia of Beauveria bassiana (Balsamo) Vuillemin strain CS-1 that showed high mortality in laboratory and net house was examined against diamondback moth larvae in the field. Conidia ($4{\times}10^{7}$ conidia/ml) were applied to larvae on chinese cabbage in a 1.5% emulsifiable oil-emulsion amended with 4% clay at a volume of 0.55 L/3.3 $m^{2}$. There were no significant differences among plants and replicates in the deposition of spray droplets on water-sensitive papers or of conidia on leaves and larvae. Weather conditions were rainy and cool during first few days, and then hot and dry. Persistence of conidia was equally short on both leaves and larvae. Nevertheless, treatment of B. bassiana potentially reduced larval populations. But the field efficacy was lower than the laboratory efficacy. This reduced efficacy was ascribed to unfavorable environmental conditions.

• Conservation Science in Museum
• /
• v.17
• /
• pp.101-116
• /
• 2016

Ceramic cultural artifacts restored with gypsum-based materials are prone to decay over time due to gypsum's natural absorption and release of atmospheric moisture, often leading to distortion and peeling of painted layers. This study proposes a new restoration material which utilizes extra hard stone, significantly superior in strength to regular gypsum. In order to enhance its physical properties and make it suitable for restoration of ceramics, extra hard stone is mixed with metakaolin. This mixture far surpasses regular gypsum in compressive strength(119MPa vs. 26MPa) while also maintaining a much lower wear rate(0.88% vs. 2.53%). Furthermore, the water absorption rate(2.9%) of the mixed material is over five times lower than that of regular gypsum(17.2%). When examined using a SEM(Scanning Electron Microscope), this mixture also proved superior to extra hard stone in terms of hardened density. The addition of metakaolin increases the mixture's strength and water resistance over that of extra hard stone and also improves its surface density, making it ideal for the restoration of ceramics. It has already been used to repair ceramic objects in the Museum's collection: Clay basin(sinan 18892), Buncheong ware bottle with incised peony design(jubsu 2034), Buncheong ware bowl with chrysanthemum(jubsu 1730). Results thus far have shown the mixture to be easy to inject and layer as well as harden into an even surface, which allows for smooth application of paint for color matching.