• 제목/요약/키워드: Natural clay

검색결과 411건 처리시간 0.025초

Behaviour of geocell reinforced soft clay bed subjected to incremental cyclic loading

  • Hegde, A.;Sitharam, T.G.
    • Geomechanics and Engineering
    • /
    • 제10권4호
    • /
    • pp.405-422
    • /
    • 2016
  • The paper deals with the results of the laboratory cyclic plate load tests performed on the reinforced soft clay beds. The performances of the clay bed reinforced with geocells and geocells with additional basal geogrid cases are compared with the performance of the unreinforced clay beds. From the cyclic plate load test results, the coefficient of elastic uniform compression ($C_u$) was calculated for the different cases. The $C_u$ value was found to increase in the presence of geocell reinforcement. The maximum increase in the $C_u$ value was observed in the case of the clay bed reinforced with the combination of geocell and geogrid. In addition, 3 times increase in the strain modulus, 10 times increase in the bearing capacity, 8 times increase in the stiffness and 90% reduction in the settlement was observed in the presence of the geocell and geogrid. Based on the laboratory test results, a hypothetical case of a prototype foundation subjected to cyclic load was analyzed. The results revealed that the natural frequency of the foundation-soil system increases by 4 times and the amplitude of the vibration reduces by 92% in the presence of the geocells and the geogrids.

산활성 점토를 이용한 수중의 방사성 핵종 Cs+ 흡착 제거 (Adsorptive Removal of Radionuclide Cs+ in Water using Acid Active Clay)

  • 이재성;김수진;김예은;김성윤;김은;유건상
    • 대한화학회지
    • /
    • 제66권2호
    • /
    • pp.78-85
    • /
    • 2022
  • 천연 백토를 6M의 황산에 넣어 80 ℃의 온도로 기계적 교반하에서 6시간 동안 가열하여 처리 한 산활성 점토를 수중의 세슘 이온(Cs+)의 제거를 위한 흡착제로서 사용하였다. 천연 백토와 산활성 점토의 물리·화학적 변화를 X-선 형광분광기, 비표면적 분석기, 그리고 에너지 분산형 X-선 분광기를 이용하여 관찰하였다. 천연 백토를 산으로 처리 하는 동안, 천연 백토를 구성하고 있는 결정 격자로부터 Al2O3, CaO, MgO, SO3 and Fe2O3가 일부분 용해되고 결과적으로 활성 부위와 더불어 기공의 부피와 비표면적의 증가를 초래하였다. 산활성 점토는 천연 백토에 비해 비표면적과 기공의 부피가 2배 정도 높았다. 산활성 점토에 의한 Cs+ 흡착은 1 분 내에 가파르게 증가하였고 60 분에 이르렀을 때 평형에 도달하였다. 25 mg L-1의 Cs+ 농도에서, 96.88%의 흡착 효율이 산활성 점토에 의해 성취되었다. Cs+의 흡착 데이터를 흡착 등온선과 반응속도 모델에 도입하였다. 산활성 점토에 의한 Cs+ 흡착 거동은 Langmuir 등온선에 잘 적용되었고 Langmuir의 등온선 계수인 Q는 10.52 mg g-1이 되는 것으로 밝혀졌다. 산활성 점토/물 계에서 Cs+ 흡착은 더 높은 상관계수 R2과 실험값 qe,exp과 계산값 qe,cal 의 근접으로 인해서 유사 일차 반응속도보다는 유사 이차 반응속도에 적합하였다. 연구의 전체적인 결과들은 산활성 점토가 수중으로부터 Cs+을 제거하는데 효율적인 흡착제로 사용될 수 있다는 보였다.

열수변질 점토맥과 산사태

  • 조환주;정경문;조호영
    • 광물과산업
    • /
    • 제29권
    • /
    • pp.56-66
    • /
    • 2016
  • 열수변질대가 폭넓게 분포하고 있는 우리나라에서 자연사면이나 인공사면에서 열수변질대 내에 산출되는 점토맥이 산사태 발생에 중요한 역할을 할 수 있다. 점토맥이 존재하는 지반에 지표수가 침투되면 점토광물의 팽윤성 때문에 국지적으로 간극수압이 급격히 상승할 수 있다. 간극수압의 상승으로 세립의 점토광물이 침식될 수 있다. 침식된 점토광물은 수두가 큰 곳에서 작은 곳으로 유동하면서 동수경사가 작은 부분에서 유속이 느려져 퇴적된다. 점토광물이 퇴적된 곳에서 국지적인 간극수압의 증가로 인한 지하수의 유출이 사면파괴를 일으킬 수 있다. 이에 본고에서는 열수변질 점토맥과 산사태와 관련한 국내외 자료를 소개하고자 한다.

  • PDF

재성형점토의 압축특성을 이용한 자연점토의 압축지수 추정 (Evaluation of Compression Index for Natural Clay Using the Compression Characteristic of Reconstituted Clay)

  • 홍성진;김동휘;이문주;지홍근;이우진
    • 한국지반공학회논문집
    • /
    • 제29권3호
    • /
    • pp.5-13
    • /
    • 2013
  • 압축지수는 점토의 압축특성을 나타내는 대표적인 물성치로 압밀시험으로 직접 결정하거나, 점토의 기본 물성으로부터 경험적 방법으로 추정한다. 그러나 자연점토의 압축지수는 지반 물성치뿐 아니라 퇴적상태에 영향을 받으므로 경험적 추정방법은 지역적 한계를 지닌다. 본 연구에서는 재성형점토의 압축특성을 이용하여 지반 물성치로부터 자연 점토의 압축지수를 추정하는 새로운 방법을 제안하였다. 부산점토의 압밀시험 결과를 통해 제안방법의 적합성을 검증하였으며, 오차원인을 분석하였다. 분석결과 제안된 방법은 경험적 추정방법보다 압축지수를 정확하게 추정하였다. 제안방법의 오차는 가정사항에 의해 발생하며, 추정오차는 $e_{cross}/e_0$와 명확한 반비례 관계를 나타냈다.

KINKING DEFORMATION OF PVD UNDER CONSOLIDATION OF NATURAL CLAY LAYER

  • Aboshi, Hisao;Inoue, Toshiyuki;Yamada, Yoshimitsu
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.349-356
    • /
    • 2003
  • Almost every material of PVD (Prefabricated Vertical Drain) has the fatal problem on the condition - the length must shorten with the settlement of the surrounding grounds - which all PVDs must satisfy. Kinking deformation by buckling of PVD due to consolidation settlement Is discussed in this paper. A new testing device to clarify the deformation of PVD under consolidation of surrounding clay was developed and the fiber drain and a PVD made of plastics were compared under the same condition of consolidation using natural clay specimens. The results are also shown in this paper.

  • PDF

Clay mineral distribution and provenance in surface sediments of Central Yellow Sea Mud

  • Koo, HyoJin;Lee, YunJi;Kim, SoonOh;Cho, HyenGoo
    • Geosciences Journal
    • /
    • 제22권6호
    • /
    • pp.989-1000
    • /
    • 2018
  • The provenance of the Central Yellow Sea Mud (CYSM) in the Yellow Sea has been attracted a great deal of attention over the last three decades, but a consensus is not yet reached. In this study, 101 surface sediment samples collected from the CYSM were investigated to determine provenance and transport mechanisms in the area using the clay minerals and major element components. The Huanghe sediments are characterized by higher smectite, but the Changjiang sediments are more abundant illite contents. Western Korean rivers contain more kaolinite and chlorite than do Chinese rivers. The Chinese rivers have higher $Fe_2O_3$, MgO, and CaO than the Korean rivers at the same $Al_2O_3$ concentration. Therefore, the clay minerals and major element concentrations can be useful indicator for the source. Based on our results, we suggest that the surface sediments in CYSM were composed mainly of Changjiang sediments, mixed a partly with sediments from the Huanghe and the western Korean rivers. Although the northwestern part of CYSM is proximate to the Huanghe, the contents of smectite and CaO were extremely low. It could be evidence that the Huanghe materials do not enter directly into the CYSM due to the Shandong Peninsula Front. Considering the oceanic circulation in the Yellow Sea, the Changjiang sediments could be transported eastward with the Changjiang Diluted Water and then mixed in CYSM via the Yellow Sea Warm Current (YSWC). Huanghe sediments could be provided by coastal currents (Shandong Coastal Current and Yellow Sea Coastal Current) and the YSWC. In addition, sediments from western Korean rivers might be supplied into the CYSM deposit via the Korean Coastal Current, Transversal Current, and YSWC.

Arsenic Contamination of Groundwater a Grave Concern: Novel Clay-based Materials for Decontamination of Arsenic (V)

  • Amrita Dwivedi;Diwakar Tiwari;Seung Mok Lee
    • 공업화학
    • /
    • 제34권2호
    • /
    • pp.199-205
    • /
    • 2023
  • Arsenic is a highly toxic element, and its contamination is widespread around the world. The natural materials with high selectivity and efficiency toward pollutants are important in wastewater treatment technology. In this study, the mesoporous synthetic hectorite was synthesized by facile hydrothermal crystallization of gels comprising silica, magnesium hydroxide, and lithium fluoride. Additionally, the naturally available clay was modified using zirconium at room temperature. Both synthetic and modified natural clays were employed in the removal of arsenate from aquatic environments. The materials were fully characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transform-infrared (FT-IR) analyses. The synthesized materials were used to remove arsenic (V) under varied physicochemical conditions. Both materials, i.e., Zr-bentonite and Zr-hectorite, showed high percentage removal of arsenic (V) at lower pH, and the efficiency decreased in an alkaline medium. The equilibrium-state sorption data agrees well with the Langmuir and Freundlich adsorption isotherms, and the maximum sorption capacity is found to be 4.608 and 2.207 mg/g for Zr-bentonite and Zr-hectorite, respectively. The kinetic data fits well with the pseudo-second order kinetic model. Furthermore, the effect of the background electrolytes study indicated that arsenic (V) is specifically sorbed at the surface of these two nanocomposites. This study demonstrated that zirconium intercalated synthetic hectorite as well as zirconium modified natural clays are effective and efficient materials for the selective removal of arsenic (V) from aqueous medium.

Geomechanical properties of synthesised clayey rocks in process of high-pressure compression and consolidation

  • Liu, Taogen;Li, Ling;Liu, Zaobao;Xie, Shouyi;Shao, Jianfu
    • Geomechanics and Engineering
    • /
    • 제20권6호
    • /
    • pp.537-546
    • /
    • 2020
  • Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.

입상점토광물에 대한 염료폐수의 흡착 (Adsorption Behavior of Organic Dye on Granular Clay)

  • 이택혁;윤국중;김선태
    • 자연과학논문집
    • /
    • 제13권1호
    • /
    • pp.35-50
    • /
    • 2003
  • 점토광물은 첨단소재용 원료로서 석유, 펄프, 비료, 점결제와 페인트 등 사용분야가 다양한 광물이며, 이러한 천연 점토광물을 비교적 간단하게 처리하여 체내에 농축되면 독성과 피해를 일으키는 염료 폐수의 흡착처리 및 흡착 메커니즘에 대해서 조사하였다. 그 결과 유기염료를 흡착처리하기 위한 입상 점토광물제조의 최적조선은 굽기온도 $700^{\circ}C$이며, 점결제인 polyvinyl alcohol 의 량은 25% 이었다. 제조된 입상 점토광물의 pH는 중성이었고 산성 메디움에서의 안정한 pH의 범위는 3~9 사이였고, 비표면적은 $83m^2/g$ 이였다. 제조된 입상점토광물에 대한 유기염료의 흡착량은 산성 메디움에서 좋은 흡착결과를 보였고, 이때 흡착엔탈피는 -3.36~ -0.84 kcal/mol 로 전형적인 물리흡착임을 나타내었다.

  • PDF

Effects of Dietary Addition of Bentonite on Manure Gas Emission, Health, Production, and Meat Characteristics of Hanwoo (Bos taurus coreanae) Steers

  • Lee, Sang-Moo;Kim, Young-Il;Kwak, Wan-Sup
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제23권12호
    • /
    • pp.1594-1600
    • /
    • 2010
  • A study was conducted to determine the dietary effects of a clay mineral (sodium bentonite, NaB) on manure gas emission, health, production, and meat characteristics of Hanwoo steers. Two diets fed to steers included a control diet (concentrate mix and rice straw) and a treatment diet (control diet+1.0% clay mineral/concentrate mix). Dietary NaB addition considerably reduced concentrations of gases ($H_2S$, $SO_2$ and $NH_3$) in the manure of Hanwoo steers. Growing steers fed NaB had similar blood profiles with the exception of lower (p<0.05) concentrations of blood alkaline phosphatase and lactate dehydrogenase. Dietary NaB addition tended to increase (p = 0.10) live weight by 30 kg at slaughtering and did not affect carcass yield and quality traits. Dietary NaB addition increased concentrations of P (p<0.01), Mg (p<0.01), Na (p<0.01), Zn (p<0.005), K (p = 0.08), Fe (p = 0.08) and Cu (p = 0.07) in the longissimus muscle compared to the control but did not affect (p>0.05) fatty acid composition. The study demonstrated that the dietary addition of a clay mineral could be effective in improving mineral bioavailability to Hanwoo steers, which could be one of the reasons for their improved performance.