• Title/Summary/Keyword: Natural Crossing

Search Result 124, Processing Time 0.02 seconds

Effects of Head Posture on Resting EMG Activity of Craniocervical Muscles and on Occlusal Contacts (두부자세에 따른 두경부 근활성 및 교합접촉양태의 변화)

  • Chang-Kweon Song;Kyung-Soo Han;Chan Chung
    • Journal of Oral Medicine and Pain
    • /
    • v.21 no.1
    • /
    • pp.89-101
    • /
    • 1996
  • This study was performed to investigate influence of the changes of head posture on resting electromyographic (EMG) activity in anterior temporalis, masseter, sternocleidomastoid muscle and trapezius, and on status of occlusal contacts. For this study twenty-nine patients with temporomandibular disorders(TMD) and thirty dental students without any masticatory symptoms were selected as patients group and control group, respectively. EMG activity($\mu$V) at rest was observed in four kind of head postures such as natural or normal head posture(NHP), forward head posture(FHP), upward head posture(UHP), downward head posture(DHP), and in NHP and FHP, EMG activity with flat occlusal splint was also checked. BioEMG$^\textregistered$(Bioelectromyograph, Bioresearch Inc., USA) was used to record EMG activity in the above four muscles with eight locations on both sides. The author used T-Scan$^\textregistered$(Tekscan Co., USA) system to investigate the changes of oclusal contats on clenching in the four head postures about number, force, time(duration) and total left-right statistis(TLR, occlusal stability crossing left-right dental arch on clenching). For taking in upward or downward head posture, head was inclined $10^{\circ}$ upward or downward and CROM$^\textregistered$ (cervical-range-of motion, Performance attainment Inc., USA) was used to maintain same posture during the procedure. The results obtained were as follows : 1. For resting EMG activity, anterior temporalis did not show any difference by change of head posture, but masseter and sternocleidomastoid muscle showed higher value of EMG activity in FHP and UHP, and trapezius showed higher value of EMG activity in FHP and DHP. 2. EMG activity of trapezius was higher than that of any other muscles in NHP, FHP, and DHP, but in UHP, the activity was the lowest reversely. 3. Patients group showed higher EMG activity than control group did in all the muscles in NHP. And significant difference between the two groups were also observed in anterior temporalis in FHP, in sternocleidomastoid muscle in UHP, and in sterno-cleidomastoid muscle and trapezius in DHP with higher activity in patients group. 4. There was no change of EMG activity in NHp with splint, but EMG activity in anterior temporalis and masseter was decreased in FHP with splint. 5. In general, status of occlusal contacts was not changed with head posture in all subjects, and difference between patients group and control group was only noted for number and force of tooth contact in UHP and DHP with more value in control group. 6. Correlationship between EMG activity and number ad force of tooth contacts was shown negatively with regard to masseter in NHP, and trapezius in UHP and DHP.

  • PDF

Facial Feature Retraction for Face and Facial Expression Recognition (얼굴인식 및 표정 인식을 위한 얼굴 및 얼굴요소의 윤곽선 추출)

  • 이경희;변혜란;정찬섭
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 1998.11a
    • /
    • pp.25-29
    • /
    • 1998
  • 본 논문은 얼굴 인식 또는 표정 인식 분야에 있어서 중요한 특징을 나타내는 얼굴과 얼굴의 주요소인 눈과 입, 눈썹의 영역 추출 및 그의 윤곽선·추출에 관한 방법을 제시한다. 얼굴요소의 영역 추출은 엣지 정보와 이진화 영상을 병합하여 이용한 프로젝션 분석을 통하여 얼굴 및 각 얼굴요소를 포함하는 최소포함사각형(MER: Minimum Enclosing Rectangle)을 추출하였다. 얼굴 영상에 관련된 윤곽선 연구에는 가변 템플릿(Deformable Template), 스네이크(Snakes: Active Contour Model)를 이용하는 연구들이 이루어지고 있는데 가변 템플릿 방법은 수행시간이 느리고 추출된 윤곽선의 모양이 획일 된 모양을 갖는 특성이 있다. 본 논문에서는 사람마다 얼굴요소의 모양의 개인차가 반영되고 빠른 수렴을 할 수 있는 스네이크 모델을 정의하여 눈, 입, 눈썹, 얼굴의 윤곽선 추출 실험을 하였다. 또한 스네이크는 초기 윤곽선의 설정이 윤곽선의 추출 곁과에 큰 영향을 미치므로, 초기 윤곽선의 설정 과정이 매우 중요하다. 본 논문에서는 얼굴 및 각 얼굴요소를 포함하는 각각의 최소 포함 사각형(MER)을 추출하고, 이 추출된 MER 내에서 얼굴 및 각 얼굴요소의 일반적인 모양을 초기 윤곽선으로 설정하는 방법을 사용하였다. 실험결과 눈, 입, 얼굴의 MER의 추출은 모두 성공하였고, 눈썹이 흐린 사람들의 경우에만 눈썹의 MER추출이 졸지 않았다. 추출된 MER을 기반으로 하여 스네이크 모델을 적용한 결과, 눈, 입, 눈썹, 얼굴의 다양한 모양을 반영한 윤곽선 추출 결과를 보였다. 특히 눈의 경우는 1차 유도 엣지 연산자에 의한 엣지 와 2차 유도 연산자를 이용한 영점 교차점(Zero Crossing)과 병합한 에너지 함수를 설정하여 보다 더 나은 윤곽선 추출 결과를 보였다. 얼굴의 윤곽선의 경우도 엣지 값과 명도 값을 병합한 에너지 함수에 의해 비교적 정확한 결과를 얻을 수 있었다.잘 동작하였다.되는 데이타를 입력한후 마우스로 원하는 작업의 메뉴를 선택하면 된다. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol/l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol/l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso." Therefore, the purpose of this study is to look into the origin of the letter designs in the Chinese character culture

  • PDF

Characterization of Rice Mutants with Enhanced Susceptibility to Rice Blast

  • Kim, Hye-Kyung;Lee, Sang-Kyu;Cho, Jung-Il;Lee, Sichul;An, Gynheung;Jwa, Nam-Soo;Kim, Byung-Ryun;Cho, Young-Chan;Han, Seong-Sook;Bhoo, Seong-Hee;Lee, Youn-Hyung;Hong, Yeon-Kyu;Yi, Gihwan;Park, Dae-Sup;Hahn, Tae-Ryong;Jeon, Jong-Seong
    • Molecules and Cells
    • /
    • v.20 no.3
    • /
    • pp.385-391
    • /
    • 2005
  • As a first step towards identifying genes involving in the signal transduction pathways mediating rice blast resistance, we isolated 3 mutants lines that showed enhanced susceptibility to rice blast KJ105 (91-033) from a T-DNA insertion library of the japonica rice cultivar, Hwayeong. Since none of the susceptible phenotypes co-segregated with the T-DNA insertion we adapted a map-based cloning strategy to isolate the gene(s) responsible for the enhanced susceptibility of the Hwayeong mutants. A genetic mapping population was produced by crossing the resistant wild type Hwayeong with the susceptible cultivar, Nagdong. Chi-square analysis of the $F_2$ segregating population indicated that resistance in Hwayeong was controlled by a single major gene that we tentatively named Pi-hy. Randomly selected susceptible plants in the $F_2$ population were used to build an initial map of Pi-hy. The SSLP marker RM2265 on chromosome 2 was closely linked to resistance. High resolution mapping using 105 $F_2$ plants revealed that the resistance gene was tightly linked, or identical, to Pib, a resistance gene with a nucleotide binding sequence and leucine-rich repeats (NB-LRR) previously isolated. Sequence analysis of the Pib locus amplified from three susceptible mutants revealed lesions within this gene, demonstrating that the Pi-hy gene is Pib. The Pib mutations in 1D-22-10-13, 1D-54-16-8, and 1C-143-16-1 were, respectively, a missense mutation in the conserved NB domain 3, a nonsense mutation in the 5th LRR, and a nonsense mutation in the C terminus following the LRRs that causes a small deletion of the C terminus. These findings provide evidence that NB domain 3 and the C terminus are required for full activity of the plant R gene. They also suggest that alterations of the resistance gene can cause major differences in pathogen specificity by affecting interactions with an avirulence factor.

Geotechnical Engineering Progress with the Incheon Bridge Project

  • Cho, Sung-Min
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2009.09a
    • /
    • pp.133-144
    • /
    • 2009
  • Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

  • PDF

Gradation and Transport Characteristics of Bed Materials in Pool-Riffle Sequence in the Gap Stream, Korea (갑천의 웅덩이-여울 연속구조에서 하상토의 입도 및 이동 특성)

  • Choi, Sung-Uk;Bae, Hye-Deuk
    • Journal of Korea Water Resources Association
    • /
    • v.44 no.1
    • /
    • pp.65-72
    • /
    • 2011
  • Natural streams meander, forming pools at the outer part of bend and riffles at the crossing. Pools are deep at a lower flow velocity, and riffles are shallow at a higher flow velocity. Attentions are being paid to pool-riffle sequences in meandering streams because pool-riffle sequences tend to increase biodiversity of the stream ecosystem. This study investigates the characteristics of distribution of bed sediment particles in the upstream reach of the Gap Stream, which is a tributary of the Geum River in Korea. The upstream part of the Gap Stream, the study reach, is a gravel-bed stream, showing a pool and three riffles due to meandering. The reach also includes pools at the upstream and downstream parts of the weir. The characteristics of bed sediment particles sampled at the wetland and in the side channel are studied, revealing that the median particle diameter in the riffle is about four times larger than that in the pool. In addition, flow simulations are carried out for ordinary discharge and design flood, and such parameters important to sediment transport as velocity, shear stress, dimensionless shear stress (or Shields number), and dimensionless shear velocity are provided to see the mobility of sediment particles in the pool-riffle sequence.

A New Spray Chrysanthemum Cultivar, 'Magic Yellow' with Single Type and Bi-Color Petals for Cut Flower (복색 홑꽃 절화용 스프레이국화 '매직옐로우' 육성)

  • Hwang, Ju Chean;Chin, Young Don;Chung, Yong Mo;Kim, Su Kyeong;Ro, Chi Woong;Jeong, Byoung Ryong
    • FLOWER RESEARCH JOURNAL
    • /
    • v.19 no.3
    • /
    • pp.172-176
    • /
    • 2011
  • A new spray chrysanthemum (Dendranthema grandiflorum) cultivar, 'Magic Yellow' was developed from a cross between 'Artist pink' and 'S03-47' by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services (ARES) from 2003 to 2008. Its characteristics were investigated three times from 2006 to 2008 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Magic Yellow' was October 18th, and year-round production was possible by day length treatment. This cultivar has single-type flowers in good harmony with bi-color ray floret and green center. Its flower was 6.0 cm in diameter, and it had 11.4 flowers per stem in autumn. The days to flowering under the short day treatment is about 45 days in spring season, and 'Magic Yellow' showed the vase life of 22.9 days in autumn. This cultivar was registered for the protection in 2008.

A New Spray Chrysanthemum Cultivar, 'Dimple' with Single Type and Bright Yellow Color Petals for Cut Flower. (밝은 황색 절화용 홑꽃 화형의 스프레이국화 '딤플' 육성)

  • Hwang, Ju Chean;Chin, Young Don;Chung, Yong Mo;Kim, Su Kyeong;Ro, Chi Woong
    • FLOWER RESEARCH JOURNAL
    • /
    • v.19 no.4
    • /
    • pp.259-263
    • /
    • 2011
  • A new spray chrysanthemum (Dendranthema grandiflorum) cultivar, 'Dimple' was developed from a cross between 'champy' and 'SP05-135', by selection of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services (ARES) from 2005 to 2009. Its characteristics were investigated three times from 2007 to 2009 under condition of forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Dimple' was October 24th, and year-round production was possible by day-length control. This cultivar has single type flowers with bright yellow ray floret and green center. The plant is very vigorous and very stable in the color of petals when it is cultivated even under high temperature condition in summer. Its flower was 4.7 cm in diameter, and it had 20.3 flowers per stem in autumn. The days to flowering under the short day treatment is about 50 in spring season, and 'Dimple' showed the vase life of 21.3 days in autumn. This cultivar was registered for the protection in 2009.

A New Flowering, Spray Chrysanthemum Cultivar for Cut Flower, "Yellow Eye" with Single Type and Light Yellow Petals (황색 홑꽃인 조기개화성의 절화용 스프레이국화 "옐로우아이" 육성)

  • Hwang, Ju-Chean;Chin, Young-Don;Kim, Jin-Ki;Kim, Su-Gyeong
    • Korean Journal of Breeding Science
    • /
    • v.40 no.4
    • /
    • pp.541-545
    • /
    • 2008
  • A new spary chrysanthemum (Dendranthema grandiflorum) cultivar 'Yellow Eye' was developed from a cross between 'Angela' and 'Angaesoguk' followed by selections of seedlings and lines at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services (ARES) from 2003 to 2007. Its characteristics were investigated three times from 2005 to 2007 under forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Yellow Eye' was October 24th, but year-round production was possible by shading and lighting. Its flower was 3.3 cm in diameter, and had 31.7 petals and 27.9 flowers per stem in autumn. It has pollenless, single type flowers with yellow petals and green flower center. To flower in under the short day condition, for 'Yellow Eye' was about 41 days in spring, and 'Yellow Eye' showed a vase life of 23.1 days in autumn. This cultivar was registered for a commercialization in 2007. 'Yellow Eye' would be cultured under the greenhouse and rain shelter condition in Korea.

Interpretation of Physical Weathering and Deterioration Mechanism for Thermal Altered Pelitic Rocks: Ulju Cheonjeon-ri Petroglyph (열변질 이질암의 물리적 풍화작용과 손상메커니즘 해석: 울주 천전리 각석)

  • Chan Hee Lee;Yu Gun Chun
    • Economic and Environmental Geology
    • /
    • v.56 no.6
    • /
    • pp.629-646
    • /
    • 2023
  • Host rock of Cheonjeon-ri petroglyph is shale belonging to the Daegu Formation of Cretaceous Gyeongsang Supergroup. The rocks were hornfelsified by thermal alteration, and shows high density and hardness. The petroglyph forms weathered zone with certain depth, and has difference in mineral and chemical composition from the unweathered zone. As the physical deterioration evaluations, most of cracks on the surface appear parallel to the bedding, and are concentrated in the upper part with relatively low density. Breakout parts are occurred in the upper and lower parts of the petroglyph, accounting for 6.0% of the total area and occurs to have been created by the wedging action of cracks crossing. The first exfoliation parts occupying the surface were 23.8% of the total area, the second exfoliations covered with 9.3%, and the exfoliation parts with three or more times were calculated as 3.4%. It is interpreted that this is not due to natural weathering, and the thermal shock caused by the cremation custom here in the past. As the ultrasonic properties, the petroglyph indicates highly strength in the horizontal direction parallel to bedding, and the area with little physical damage recorded mean of 4,684 m/s, but the area with severe cracks and exfoliations showed difference from 2,597 to 3,382 m/s on average. Physical deterioration to the Cheonjeon-ri petroglyph occurred to influence by repeated weathering, which caused the rock surface to become more severe than the inside and the binding force of minerals to weaken. Therefore, it can be understood that when greater stress occurs in the weathered zone than in the unweathered zone, the relatively weathered surface loses its support and exfoliation occurs.

Genetic Variation and Population Specific Mitochondrial DNA Haplotype Found in the Jeju Native Pig Population (제주재래돼지 집단서 집단특이적 mtDNA Haplotype과 유전적 다양성)

  • Han, S.H.;Cho, I.C.;Lee, C.E.;Lee, S.S.;Kang, S.Y.;Choi, Y.L.;Oh, W.Y.;Sung, P.N.;Ko, S.B.;Oh, M.Y.;Ko, M.S.
    • Journal of Animal Science and Technology
    • /
    • v.46 no.6
    • /
    • pp.917-924
    • /
    • 2004
  • Using PCR-RFLP haplotyping for the mitochondrial DNA(mtDNA) fragment containing the NADH dehydrogenase 2 gene(ND2) and three tRNA genes(tRNA-Met, tRNA-Trp and tRNA-Ala), we characterized the genetic diversity of five pig breeds including Jeju native pigs. mtDNA polymorphisms showing distinct cleavage patterns were found in the pig breeds. Two digestion patterns were detected when HaeIII- and Hinfl-RFLP, and four in the Tsp5091-RFLP analyses. Combining the three restriction enzyme digestion patterns found in five different pig breeds, four mtDNA haplotypes were observed and the haplotype frequencies were significantly different by the pig breeds. A monomorphic haplotype, mtWB, was observed in both Korean wild boars and Large White pigs. Both Duroc and Landrace pigs contained two haplotypes suggesting their multiple maternal lineages. Jeju native pig has two haplotypes(mtJN and mtJD). Of these, mtJN is identified as a Jeju native pig specific haplotype. This study suggested that more than two progenitor populations have been taken part in the domestication process of the Jeju native pig population, and/or probably subsequent crossing with other pig breeds from near east Asia. Unlike with our prediction, there was no direct evidence under molecular levels on the maternal introgression of Korean wild boar in the domestication of Jeju native pigs. In conclusion, specificity of mtDNA haplotypes related to pig breeds win be useful for identifying the maternal lineage as wen as constructing the genealogical pedigree in pigs.