• IE interfaces
• /
• v.25 no.1
• /
• pp.96-105
• /
• 2012

Recently, the interoperability has become more important to enhance the net-centric capabilities of the warfighter. DITA (Defense Information Technical stAndard) is the set of IT standards for improving interoperability, scalability, effectiveness, and efficiency. In this paper, we analyzed the standardizing process to derive the selection criteria and structurized the derived selection criteria using the KJ (Kawakita Jiro) method. Finally, we developed an evaluation model for selecting a standard for DITA using AHP (Analytic Hierarchy Process). As a result, we present eight selection criteria (maintainability, trend, stability, portability, effect of other standard, constraint of the network, and applicability to the systems). We also applied some examples that several IT standards to our selection model for validating the model. We expect our model to help to decide objectively whether the new standard can be listed in DITA.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.788-792
• /
• 2013

A shortcoming of using transmission electron microscopy (TEM) for structural analysis via electron diffraction is the relatively large error of the measurements as compared to X-ray diffraction. To reduce these errors, various internal standard methods from earlier studies have been widely used. We developed a new device to facilitate the application of internal standard methods in preparation of TEM grids used for nanopowder analysis. Through the application of a partial mask on the TEM grid, both the internal standards and the research materials can be loaded on the same grid. Through this process, we conducted a TEM analysis that compared synthetic hydroxyapatite (HAp) nanopowder to bone apatite from a bovine femur. We determined that the accuracy of the d-spacing measurements of the HAp and bone powders could be improved to better than 1% after statistical treatments of the experimental data. By applying a quarter mask, we loaded four different nanoparticles on a single TEM grid, with one section designated for the internal standard.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.515-522
• /
• 2010

The purpose of this research was to construct an efficient management system in developing and supplying a 'management standard diagnostic table' for the improvement of chestnut cultivation farmhouse. 'Chestnut management standard diagnostic table' were based from the actual condition of chestnut management in Chungcheongnam-do, selected 'appraisal factor item and by consulting 'agricultural plant standard diagnostic table' and various kinds of data which had already been developed. This research also consulted the classification systems and degree of importance. The developed 'Chestnut management diagnostic table' consisted of 3 first classified items, 19 second classified items and 2 product indicator items.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.351-360
• /
• 2020

If various unreasonable safety standards are preemptively and effectively readjusted, the risk of accidents can be reduced. In this paper, we proposed a machine reading comprehension-based safety standard Q&A system to secure supporting technology for effective search and analysis of safety standards for integrated and systematic management of safety standards. The proposed model finds documents related to safety standard questions in the various laws and regulations, and then divides these documents into provisions. Only those provisions that are likely to contain the answer to the question are selected, and then the BERT-based machine reading comprehension model is used to find answers to questions related to safety standards. When the proposed safety standard Q&A system is applied to KorQuAD dataset, the performance of EM 40.42% and F1 55.34% are shown.

• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.297-300
• /
• 2017

Realistic media comprised of metadata of the five senses to provide enhanced experiences by stimulating our memory and sensations have had an increasingly pervading effect in our daily lives. Many researchers and companies are in the process of developing their own authoring systems running on different platforms to serve realistic media, resulting in compatibility issues among the systems. To tackle these issues, the International Organization for Standardization have standardized the interface, data format, protocol, API, etc. required to provide the realistic media. In particular, the ISO/IEC 23005 standard, which is called MPEG-V in SC29/WG 11, has defined XML schemas for olfaction interaction based on electronic nose (E-Nose), and scent display. In this paper, the MPEG-V standard for olfaction interaction is reviewed, and a data flow diagram that can be used for olfactory interaction based on the MPEG-V standard was designed. In addition, the necessary schemas related to the E-Nose sensor for olfactory interaction was provided.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.164-169
• /
• 2008

National standard system for calibrating voltage transformer(VT) up to primary voltage of 240 kV have been established in 2005. The system consists of voltage source, regulating unit, VT testing unit, standard VT, VT under test and VT burden. To verify and validate the performance for 240 kV VT calibration system, the comparison with the National Measurement Institute of Australia(NMIA) has been performed using same VTs. The comparison results of the VTs mesured at the Korea Research Institute of Stansdards and Science(KRISS) are consistent with those measured at NMIA within 0.002 % for ratio error and 0.14 min for phase displacement in the primary voltage ranges of Vp = 3300 V - 22000 V with a secondary voltage of Vs = 110 V.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.16-23
• /
• 2010

This research analyzed about inconsistence and cause of the audit result on national defense quality management system in certification company. Direction of research analyzes corelation with distribution by items at national defense quality management system standard by Investigated number and occurrence of examination report slight and critical incongruity on 2008 and 2009. Study finding slight and critical incongruity happened to first examination average 10.2 items, renewal examination average 7.0 items. By incongruity occurrence appeared high in item that there are a lot of examination item shares of standard requirement, it was studied by correlative thing between the examination with standard. Factor of incongruity occurrence was proved to comprehension insufficiency for quality management system, quality procedure insufficiency, didn't fulfil proceedings, business was unripe. In this papers, we contribute to propose direction for improvement of national defense quality management system comprehensive faculty elevation and national defense quality certification in this treatise.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.205-206
• /
• 2019

National Competency Standard(NCS) is a national organization that organizes the knowledge, skills, and quality required to perform duties at industrial sites by industry sector and level. As NCS was developed and adopted as part of the government's implementation of capability-oriented society, the construction industry is also fully applying NCS to the curriculum and training. This study investigated and analyzed the problems of NCS development in construction work field through prior research analysis and experts interview and derived problems such as discrepancies in classification system, lack of connectivity with curriculum, and lack of effectiveness in revising NCS in construction work field. Further research is thought to be necessary for the establishment of the development system reflecting the construction characteristics in the future and for the presentation of practical improvement directions.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.121-127
• /
• 2018

This paper develops and builds an Integrated Assessment System for National Competency Standard Professional Basic. The integrated evaluation system for basic job competency in the National Competency Standards is developed to conduct examination by means of computers, smartphones and tablet PCs. The system can be used for the basic job competency test, examination for online cyber universities, job competency examination for enterprises, and the listening, reading, and speaking test in the foreign language proficiency examination and is even better in terms of facility investment and saved operating costs as well as efficient use of spaces in comparison with conventional evaluation schemes. Even greater synergy effects can be achieved by providing support for the integrated evaluation system for basic job competency in connection with the NCS qualification system. The evaluation system has been tested and practiced at a specialized high school and can be applied to the NCS education evaluation of the college and four-year college and to the selection examination of new employees of the company.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.4
• /
• pp.379-384
• /
• 2016

Objective : Mechanical thrombectomy (MT) for acute intracranial internal carotid artery (ICA) occlusion is often complicated by difficult revascularization and non-involved territory embolization possibly related with larger clot-burden. This study aims to evaluate the efficacy of proximal aspiration thrombectomy (PAT) using a balloon-tipped guide catheter for clot-burden reduction in such cases with period-to-period analysis (period 1 : standard MT without PAT; period 2 : PAT first, then standard MT for the remaining occlusion). Methods : Eighty-six patients who underwent MT for acute intracranial ICA occlusion were included in this analysis from the prospectively maintained stroke registry (33 patients in period 1 and 53 in period 2). In period 2, 'responder' was defined as a case where some amount of clot was retrieved by PAT and the following angiography showed partial or full recanalization. Results : Fifteen of fifty-three patients in period 2 (28.3%) were 'responders' to PAT. There was a significantly higher incidence of atrial fibrillation in the 'responder' subgroup. Period 2 showed a significantly shorter puncture-to-reperfusion time (94.5 minutes vs. 56.0 minutes; p=0.002), a significantly higher Thrombolysis in Cerebral Infarction of 2b-3 reperfusion (45.5% vs. 73.6%; p=0.009), but only a trend for better 3-month favorable outcome (mRS 0-2; 36.4% vs. 54.7%; p=0.097). There was no increase in the incidence of procedure-related complications or intracranial hemorrhage in period 2. Conclusion : A strategy of PAT before standard MT may result in shorter puncture-to-reperfusion time and better angiographic outcome than a strategy of standard MT for acute intracranial ICA occlusion.