• Journal of Korean Society on Water Environment
• /
• v.31 no.1
• /
• pp.55-66
• /
• 2015

It has been well known that it is not easy to quantify pollutant loads driven by non-point source pollution due to various factors affecting generation and transport mechanism of it. Especially pollutant loads through baseflow have been investigated by limited number of researchers. Thus in this study, the Web-based WAPLE (WHAT-Pollutant Load Estimation) system was developed and applied at study watersheds to quantify baseflow contribution of pollutant. In YbB watershed, baseflow contribution with WWTP discharge is responsible for 49.5% of total pollutant loads at the watershed. Among these, pollutant loads through baseflow (excluding any WWTP discharge) is responsible for 61.7% of it. In GbA watershed, it was found that 58.4% is contributed by baseflow with WWTP discharge 2.9% and 97.1% is by baseflow. For NbB watershed (without WWTP discharge), 52.3% of pollutant load is transported through baseflow. As shown in this study, it was found that over 50.0% of TN (Total Nitrogen) pollutant loads are contributed by non-direct runoff. Thus pollutant loads contributed by baseflow and WWTP discharge as well as direct runoff contribution should be quantified to develop and implement watershed-specific Best Management Practices during dry period.

• Korean Journal of Agricultural Science
• /
• v.44 no.4
• /
• pp.604-612
• /
• 2017

In this study, the effects of planting density on the growth of chrysanthemum in a greenhouse were evaluated on two popular varieties (i.e., Sinma and Moonlight). Planting density treatments were as follows: 1) $12cm{\times}12cm$, 2) $6cm{\times}12cm$, 3) $6cm{\times}12cm$ with one-cell vacant, and 4) $6cm{\times}12cm$ with two-cell vacant. Size of each treatments indicate one chrysanthemum was planted in that sized cell that was rectangular shaped field and these treatments were located in a line. Moreover, "one and two-cell vacant" means that it makes middle point of the field empty, offers beside chrysanthemum larger spaces to grow. For the Sinma variety, the results of growth and flowering characteristics at the harvesting stage showed that leaf number, leaf length, flower length, and leaf area were highest when the crop was planted at the $12cm{\times}12cm$ density, and the next preferable density was $6cm{\times}12cm$ with one-cell vacant. For the Moonlight variety, the results showed that stalk height and diameter, leaf number and length, flower length, leaf area, and flower number were highest at the $12cm{\times}12cm$ planting density. For Sinma, ratios of marketable production were 87.5% and 83.3% for the $12cm{\times}12cm$ and $6cm{\times}12cm$ with two-cell vacant, respectively. For Moonlight, ratios were 88.0% and 84.3% for the $12cm{\times}12cm$ and $6cm{\times}12cm$ with two-cell vacant.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.7
• /
• pp.67-75
• /
• 2005

It has been well-known that the Nonpoint Source (NPS) pollutions are the primary contributors to water quality degradation in the receiving water bodies as well as the Point Source (PS) pollutions. To develop an effective management practice for water quality improvement, pollutant loads must be first estimated. In many studies, the Numeric Integration (NI) method has been used because of its ease of application, irrespective of the total number of samples collected for each storm event. Thus, there have been needs for more accurate pollutant load estimation with a limited number of water quality samples. In this study, NI method and regression method using the USGS ESTIMATOR model were comparatively used to calculate the pollutant loads for the Wolgokri watershed, Gangwon Province. The $NO_{3}$-N, T-N, and T-P loads using NI method and ESTIMATOR model were 13.85 kg/ha, 45.92 kg/ha, and 1.887 kg/ha, and 11.93 kg/ha,43.20 kg/ha, and 1.650 kg/ha, respectively. The estimated loads using ESTIMATOR model were lower than those using NI method by $86\%$, $94\%$, and $87\%$. These discrepancies in the estimated loads using a different load estimation method could be explained in that the total number of samples were not sufficient enough for NI method. Thus, ESTIMATOR model is recommended for the frequently stream discharge and less frequently measured water quality data.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.99-105
• /
• 2011

In this paper, we proposed a method for estimating an accurate gamut based on segment maxima method. According to the number of segments in the segment maxima, a local concavity is generated in the vicinity of lightness axis or a gamut is reduced in high chroma region. It induces artifacts or deterioration of the image quality. To remove these artifacts, the number of segment is determined according to the number of samples. and a local concavity is modified by extending a detected concave point to the line connecting two adjacent boundary points. Experimental results show that the contours in a uniform color region and speckle artifacts from the conventional segment maxima algorithm are removed.

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.383-392
• /
• 2014

In this study, we investigated the Fukiage sand dunes of southern Kyushu, Japan. We surveyed the status of recovery of coastal Japanese black pine forests damaged by pine wilt disease and their disaster prevention capability. We placed two transects: Transect 1, in an area that was severely damaged (80-90% damage rate) by pine wilt disease, and Transect 2, in an area that was mostly undamaged (<10% damage rate). Then, we installed survey lines, carried out vegetation surveys, and measured the depth and pH of humus soil. The survey lines were placed perpendicular to the coastline from the top of the fore-dune to the inland area, and divided into five 50 m sections. Before the point 100 m inland from the top of the fore-dune, the number of invasive hardwoods and of Japanese black pines were small because of the poor growth environment in both transects. Past the 100 m point, the species and number of Japanese black pines and broad-leaved trees increased further inland because the growth environment improved. In addition, the recovery metrics of tree height, diameter at breast height, age, and number in Transect 1 were much lower than those in Transect 2, and the basal area of broad-leaved trees and the depth of humus soil in Transect 1 were lower than in Transect 2, and the soil pH of humus soil in Transect 1 was higher than that of Transect 2. The shape ratio of the Japanese black pine forests indicated that they were insufficient for disaster prevention. Therefore, in order to fully promote the disaster prevention capability of coastal Japanese black pine forests, we should not only focus on prevention of pine wilt disease but also undertake continuous control efforts taking into consideration the sound growth environment such as appropriate density and soil management and removal of invasive broad-leaved trees.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.373-385
• /
• 2004

Statement of problem: The microbial adhesion on the surface of materials used in prosthodontics and restorative dentistry significantly influences microbial infection. Purpose: The purpose of this study was to evaluate the effect of how the degree of surface roughness of acrlyic resin affect the adhesion of bacteria. Material and methods: Resins were finished with $50{\mu}m$ and $250{\mu}m$ aluminium oxide particles by using sandblaster, by using stone point, and high polished with $Opa^{(R)}$ and Lace $motor^{(R)}$. The surface of acrylic resin attached by bacteria was directly touched on the surface of BHI agar, which was incubated. Bacteria colonies formed on BHI agar were counted in accordance with the degree of the surface roughness. Results: 1. The viable cell number of Streptococcus mutans increased on the acrylic resins incubated in BHI broth than in PBS. 2. The viable cell number of Streptococcus mutans increased on the acrylic resins incubated without agitation than with agitation, washed three times than six times, and incubated in broth added with 5% sucrose than without sucrose. 3. When Streptococcus mutans incubated in BHI broth, the number of Streptococcus mutans colonies formed on BHI agar was the largest on the acrylic resins finished with $250{\mu}m$ aluminium oxide particle using sandblaster. But when incubated in BHI broth containing sucrose, the number of colonies formed on that was the largest on the acrylic resins high polished using $Opal^{(R)}$ and Lace $motor^{(R)}$. 4. When Streptococcus sanguis was incubated in BHI broth with or without sucrose, the number of Streptococcus mutans colonies formed on BHI agar was the largest on the acrylic resins finished with $250{\mu}m$ aluminium oxide particle using sandblaster. 5. When Actinomyces viscosus was incubated in BHI broth with or without sucrose, the number of Streptococcus mutans colonies formed on BHI agar was the largest on the acrylic resins high polished using $Opal^{(R)}$ and Lace $motor^{(R)}$. Conclusion: These results indicated that when acrylic resins attached by bacteria were touched on the surface of BHI agar, the number of bacterial colonies formed on the agar was dependent on the bacterial species. Also, the result of this study was showed that increase in the surface roughness and the addition of sucrose increased retention of microbial cells.

• Honam Mathematical Journal
• /
• v.36 no.1
• /
• pp.103-112
• /
• 2014

There are several theories to say that 'Mathematics is beautiful', but the typical one of them is a theory about the golden ratio. Often the golden ratio apt to be considered only as the geometric shapes or the simple number of ratio used in buildings and arts. However in this paper, we studied to consider the mathematical theories which are contained in their inside. In particular, we investigate the various expressions of the continued fraction which are represented by the golden ratio.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.3-5
• /
• 2003

This paper deals with the characteristics of a capacitor-run single-phase induction motor by changing of conductor bar numbers. The Finite Element Method (FEM) is used to analyze the starting characteristics according to the rotor initial starting point about conduction bar and the characteristic analysis at the rated condition is calculated by equivalent circuit based on symmetry coordinate theory Finally, the analysis results of the analysis models have different conductor bars in their rotor are compared.

• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1719-1724
• /
• 2002

A previously designed capillary viscometer with measuring differential pressure was modified to measure the viscosity of non-Newtonian fluids including unadulterated blood continuously over numerous shear rates in a single measurement. Because of unavoidable experimental noise and a limited number of data, the previous capillary viscometer experienced an inaccuracy and could not directly determine a viscosity without an iterative calculation. However, in the present measurement there are numerous data available near the point of interest so that the numeric value of the derivative, d(In Q)/d(In Q$\sub$w/), is no longer sensitive to the method of differentiation. In addition, relatively low and wide shear rate viscosity measurements were possible because of the present precision pressure-scanning method with respect to time. For aqueous polymer solutions, excellent agreement was found between the results from the pressure-scanning capillary viscometer and those from a commercially available rotating viscometer. In addition, the pressure-scanning capillary viscometer measured the viscosity of unadulterated whole blood without adding any anticoagulants.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.160-165
• /
• 2002

A study on digital processes of injection mold in reverse engineering are presented. Reverse engineering is useful fur several cases, where user has no geometry information of object. Laser scanner is used to obtaining 3D coordinates of object. Sequences to process cloud data are described; sampling to reduce number of points, sorting to adjust the point order, and fitting to curve and surface, and so on. Split slide structure of mold is used fur undercut part and high viscosity material. Flow of injection molding are analysed to correct cooling channel and simulate molding conditions. NC tool paths are generated to carve core and cavity. The processes are performed in digital data for reduction of lead time and consecutive geometry data.