• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.151-157
• /
• 2013

The law for indicating the address based on the street name has taken effect in 1997. The address based on land-lot number will be changed to the address based on the street name giving odd numbers to the buildings situated on the left side and even numbers to the buildings situated on the right side per street. Searching locations by street name addresses is possible for residential areas, on the other hand, the system of finding locations is insufficient for farmlands, mountains and others, so it is unable to cope with crimes and emergency rescue. In order to make up for the weak points of street name address, the national point number, grid reference system was introduced for finding location of non-residential areas. Therefore, the purpose of this paper is to help the introduction the national point number. In this paper, we proposed a territory-oriented control point and grid range for the national point number. Numbering scheme of grid zone shall be alphanumeric, a two-letter pair Hangul and the grid coordinates in terms of Easting and Northing. We also proposed the notice area for the national point number and location of signs, application about the public and private sector.

• Journal of ILASS-Korea
• /
• v.4 no.1
• /
• pp.55-61
• /
• 1999

The first maximum point in the stability curve of liquid jet, i.e., the critical point is associated with the critical Reynolds number. This critical Reynolds number should be predicted by simple means. In this work, the critical Reynolds number in the stability curve of liquid jet are predicted using the empirical correlations and the experimental data reported in the literatures. The critical Reynolds number was found to be a function of the Ohnesorge number, nozzle lengh-to-diameter ratio, ambient Weber number and nozzle inlet type. An empirical correlation for the critical Reynolds number as a function of the Ohnesorge number and nozzle length-to-diameter ratio is newly proposed here. Although an empirical correlation proposed in this work may not be universal because of excluding the effects of ambient pressure and nozzle inlet type, it has reasonably agrees with the measured critical Reynolds number.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3093-3099
• /
• 2014

Modern graphic processors, multimedia processors and audio processors mostly use floating-point number. Meanwhile, high-level language such as C and Java uses both single-precision and double precision floating-point number. In this paper, an algorithm which computes the reciprocal of double precision floating-point number using a 32 bit multiplier is proposed. It divides the mantissa of double precision floating-point number to upper part and lower part, and calculates the reciprocal of the upper part with Goldschmidt's algorithm, and computes the reciprocal of double precision floating-point number with calculated upper part reciprocal as the initial value is proposed. Since the number of multiplications performed by the proposed algorithm is dependent on the mantissa of floating-point number, the average number of multiplications per an operation is derived from some reciprocal tables with varying sizes.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.16-22
• /
• 2021

We present the Shannon entropy as an indicator of the spatial resolutions of the morphologies of the resonance mode patterns in an optical resonator. We obtain each optimized number of mesh points, one of minimum size and the other of maximum one. The optimized mesh-point number of minimum size is determined by the identifiable quantum number through a chi-squared test, whereas the saturation of the difference between Shannon entropies corresponds to the other mesh-point number of maximum size. We also show that the optimized minimum mesh-point increases as the (real) wave number increases and approximates the proportionality constant between them.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.11
• /
• pp.754-761
• /
• 2011

The present study numerically investigates two-dimensional flow and heat transfer in the multiple confined impinging slot jet. Numerical simulations are performed for the different Reynolds numbers(Re=100 and 200) in the range of nozzles from 1 to 9 and height ratios(H/D) from 2 to 5, where H/D is the ratio of the channel height to the slot width. The vector plots of velocity profile, stagnation and averaged Nusselt number distributions are presented in this paper. The dependency of thermal fields on the Reynolds number, nozzle number and height ratio can be clarified by observing the Nusselt number as heat transfer characteristic at the stagnation point and impingement surface. The Nusselt number at the stagnation point of the central slot shows unsteadiness at H/D=3 and Re=200. The value of Nusselt number at the stagnation point of the central slot decreases with higher Reynolds number and number of nozzle although overall area averaged Nusselt number increases. Hence careful selection of geometrical parameters and number of nozzle are necessary for optimization of the heat transfer performance of multiple slot impinging jet.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.5
• /
• pp.285-292
• /
• 2014

The commonly used Newton-Raphson's floating-point number divider algorithm performs two multiplications in one iteration. In this paper, a tentative K'th Newton-Raphson's floating-point number divider algorithm which performs K times multiplications in one iteration is proposed. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications per an operation in single precision and double precision divider is derived from many reciprocal tables with varying sizes. In addition, an error correction algorithm, which consists of one multiplication and a decision, to get exact result in divider is proposed. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a floating point number divider unit. Also, it can be used to construct optimized approximate reciprocal tables.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.2
• /
• pp.84-90
• /
• 2014

This paper presents the results of three-dimensional face point cloud smoothing based on a modified anisotropic diffusion method. The focus of this research was to obtain a 3D face point cloud with a smooth texture and number of vertices equal to the number of vertices input during the smoothing process. Different from other methods, such as using a template D face model, modified anisotropic diffusion only uses basic concepts of convolution and filtering which do not require a complex process. In this research, we used 6D point cloud face data where the first 3D point cloud contained data pertaining to noisy x-, y-, and z-coordinate information, and the other 3D point cloud contained data regarding the red, green, and blue pixel layers as an input system. We used vertex selection to modify the original anisotropic diffusion. The results show that our method has improved performance relative to the original anisotropic diffusion method.

• Communications of the Korean Mathematical Society
• /
• v.10 no.3
• /
• pp.681-688
• /
• 1995

Fixed-point theory has an extension to coincidences. For a pair of maps $f,g:X_1 \to X_2$, a coincidence of f and g is a point $x \in X_1$ such that $f(x) = g(x)$, and $Coin(f,g) = {x \in X_1 $\mid$ f(x) = g(x)}$ is the coincidence set of f and g. The Nielsen coincidence number N(f,g) and the Lefschetz coincidence number L(f,g) are used to estimate the cardinality of Coin(f,g). The aspherical manifolds whose fundamental group has a normal solvable subgroup of finite index is called infrasolvmanifolds. We show that if $M_1,M_2$ are compact connected orientable infrasolvmanifolds, then $N(f,g) \geq $\mid$L(f,g)$\mid$$ for every $f,g : M_1 \to M_2$.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2018

In this paper, a tentative Kth order Newton-Raphson's floating point number Nth root algorithm for K order convergence rate in one iteration is proposed by applying Taylor series to the Newton-Raphson root algorithm. Using the proposed algorithm, $F^{-1/N}$ and $F^{-(N-1)/N}$ can be computed from iterative multiplications without division. It also predicts the error of the algorithm iteration and iterates only until the predicted error becomes smaller than the specified value. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a floating point number Nth root unit.

• Journal of Korea Multimedia Society
• /
• v.22 no.9
• /
• pp.1029-1035
• /
• 2019

In this paper, a tentative Kth order Goldschmidt floating point number Nth root algorithm for K order convergence rate in one iteration is proposed by applying Taylor series to the Goldschmidt square root algorithm. Using the proposed algorithm, Nth root and Nth inverse root can be computed from iterative multiplications without division. It also predicts the error of the algorithm iteration. It iterates until the predicted error becomes smaller than the specified value. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a floating point number Nth root unit.