• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.1
• /
• pp.11-17
• /
• 2008

Typical wireless sensor networks used in structural monitoring are continuous types wherein data transmission is progressive at all time that may include irrelevant and insignificant data and information. Continuous types of wireless monitoring systems often pose problems of handling large-sized data that may deteriorate the performance of the system. The proposed method is to suggest an event-triggered monitoring system that captures and transmits relevant data only. An error signal generated by the Principal Components Analysis (PCA) is utilized as an index for event detection and selective data transmission. With this new monitoring scheme, the remote server is relieved of unwanted data by receiving only relevant information from the wireless sensor networks. The performance of the proposed scheme was verified with simulation studies.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.393-408
• /
• 2004

There exists a clear need to monitor the performance of civil structures over their operational lives. Current commercial monitoring systems suffer from various technological and economic limitations that prevent their widespread adoption. The wires used to route measurements from system sensors to the centralized data server represent one of the greatest limitations since they are physically vulnerable and expensive from an installation and maintenance standpoint. In lieu of cables, the introduction of low-cost wireless communications is proposed. The result is the design of a prototype wireless sensing unit that can serve as the fundamental building block of wireless modular monitoring systems (WiMMS). An additional feature of the wireless sensing unit is the incorporation of computational power in the form of state-of-art microcontrollers. The prototype unit is validated with a series of laboratory and field tests. The Alamosa Canyon Bridge is employed to serve as a full-scale benchmark structure to validate the performance of the wireless sensing unit in the field. A traditional cable-based monitoring system is installed in parallel with the wireless sensing units for performance comparison.

• Korean Journal of Community Nutrition
• /
• v.22 no.5
• /
• pp.401-412
• /
• 2017

Objectives: The purpose of this study was to investigate the current status of parents' monitoring of school lunch programs and to examine the relationship of parents' school lunch monitoring with their level of trust in school lunch programs. Methods: During November 2016, a web survey was conducted with 1,283 parents who had participated in monitoring of school lunch programs. A total of 621 parents completed the questionnaires (48.4% response rate) and the responses from 442 parents were analyzed (34.5% analysis rate) for elementary (n=196) and middle/high school parents (n=246), respectively. Results: Both the elementary and middle/high school parents most wanted to participate in monitoring 1~2 times per month, which was less frequent than their current practice. They showed the highest experience rate in 'food sanitation' area in both the prior training and actual practice of school lunch monitoring. They most responded 'increasing trust in school lunch programs' as a merit and 'lack of parents participating in monitoring' as a problem of school lunch monitoring. The average levels of trust did not differ between elementary and middle/high school parents. Multiple regression analyses showed that elementary school parents' level of satisfaction in the monitored school lunch programs was positively associated with the parents' level of trust in general school lunch programs. Monitoring frequency and parents' age, in addition to level of satisfaction in the monitored school lunch program, were associated with level of trust in general school lunch programs among middle/high school parents. Conclusions: There was room for change in parents' school lunch monitoring programs to meet parents' needs better. Well-managed school lunch monitoring programs contributing to parents' satisfaction with school lunch programs could increase parents' level of trust in school lunch programs.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.2
• /
• pp.114-119
• /
• 2021

To restore the Gold-spotted pond frog (Pelophylax chosenicus), a Korean endangered frog, 600 captive-reared individuals were reintroduced between August and September 2019 into an aquatic garden in the National Institute of Ecology where P. chosenicus had previously inhabited. After reintroduction, six post-release monitoring sessions were conducted from August 2019 to May 2020. Monitoring was performed using three methods (counting calls, observation, and capture) from sunset to midnight near release sites, eliminating potential threat factors. Snout-vent lengths and body weights of recaptured individuals were measured before they were released immediately. We noted that both snout-vent lengths and body weights of recaptured individuals were slightly higher than those before. The average recapture rate was 4.66%. Reintroduced frogs were recaptured at the last monitoring session conducted in May 2020, indicating that these reintroduced frogs hibernated during the winter successfully. We found that these reintroduced frogs successfully settled after release. This result will be useful for establishing management strategies for endangered frogs in Korea. Particularly, post-release monitoring could be an essential approach in the restoration program of a target species.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.31-39
• /
• 1995

Environmental Impact Assessment (EIA) is composed of various procedures, such as screening, scoping, inventory survey, prediction, assessment, alternative assessment, mitigation measures, and post management. Environmental monitoring data for air quality or water quality, etc. is applied in the EIA process, especially in prediction and post management. As an effective tool of environmental monitoring, the remote sensing method, introduced recently, was used in collecting nationwide data concerning ecosystem and land use. This article explains the current monitoring status in Korea. Monitoring factors include air quality, water quality, soil, ocean, odor, noise, and ecosystems. This report explains the organization of the environmental monitoring system managed by the Ministry of Environment in Korea. Furthermore, it shows the environmental criteria and environmental policies applied to EIA in Korea.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.76-79
• /
• 2018

In this paper, we developed a pressure monitoring system using silicon pressure sensor. The pressure monitoring system was developed on the basis of a microcontroller, and a self-developed silicon pressure sensor was applied. The pressure monitoring system outputs the current pressure value via UART communication. In addition, it includes a function of displaying by LED when the preset three-step pressure (low, medium, high pressure) is reached. The silicon pressure sensor used in the pressure monitoring system was set to 0 kPa, 10 kPa, 26 kPa, and the pressure monitoring system was evaluated because the measured maximum pressure was in the range of 100 kPa.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.92-99
• /
• 2007

As of 2007, there are 2,499 groundwater quality monitoring stations in total in Korea. Among them,478 are operated by the MOCT (Ministry of Construction and Transportation) for the National Groundwater Network Program, 781 wells by the ME (Ministry of Environment) for monitoring of the area where imminent contamination is expected, and 1240 wells by the local governments for monitoring of other areas. Even though, water quality data obtained from those wells are being provided to the public since 1999, the information for the wells has not been appropriately informed. In this study, we assessed the wells that are being used for the national groundwater quality monitoring from the points of operation, location, and well configuration to provide suggestions for the improvement of the national groundwater quality monitoring.

• Journal of Information Processing Systems
• /
• v.11 no.4
• /
• pp.556-572
• /
• 2015

This paper presents the applications of spatial interpolation and assimilation methods for satellite and ground meteorological data, including temperature, relative humidity, and precipitation in regions of Vietnam. In this work, Universal Kriging is used for spatially interpolating ground data and its interpolated results are assimilated with corresponding satellite data to anticipate better gridded data. The input meteorological data was collected from 98 ground weather stations located all over Vietnam; whereas, the satellite data consists of the MODIS Atmospheric Profiles product (MOD07), the ASTER Global Digital Elevation Map (ASTER DEM), and the Tropical Rainfall Measuring Mission (TRMM) in six years. The outputs are gridded fields of temperature, relative humidity, and precipitation. The empirical results were evaluated by using the Root mean square error (RMSE) and the mean percent error (MPE), which illustrate that Universal Kriging interpolation obtains higher accuracy than other forms of Kriging; whereas, the assimilation for precipitation gradually reduces RMSE and significantly MPE. It also reveals that the accuracy of temperature and humidity when employing assimilation that is not significantly improved because of low MODIS retrieval due to cloud contamination.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.5 no.2
• /
• pp.43-49
• /
• 2024

Ecological monitoring provides indispensable data for biodiversity conservation and sustainable resource management. However, the complexity and variability inherent in ecological monitoring data necessitate robust verification processes to ensure data integrity. This study employed Benford's Law, a statistical principle traditionally used in fields such as finance and health sciences, to evaluate the authenticity of ecological monitoring data related to the abundance of migratory bird species across various locations in South Korea. Benford's Law anticipates a specific logarithmic distribution of leading digits in naturally occurring numerical datasets. Our investigation involved two stages of analysis: a first-order analysis considering the leading digit and a second-order analysis examining the first two digits of bird population counts. While the first-order analysis displayed moderate conformity to Benford's Law that suggested overall data integrity, the second-order analysis revealed more pronounced deviations, indicating potential inconsistencies or inaccuracies in certain subsets of the data. Although our data did not perfectly align with Benford's Law, these deviations underscore the complex nature of ecological research, which is influenced by a multitude of environmental, methodological, and human factors.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.193-204
• /
• 2016

Objective: This study carried out base research to build an agricultural safety monitoring system through ICT convergence to reduce safety accidents and enhance welfare in life in the agricultural field. Background: The functions and values of rural villages as the space of living are recognized anew, but occupational accident rate due to farm work accidents is on the rise each year. Therefore, the seriousness of such a problem emerges. The convergence technology combining ICT is recently applied to industries overall, and therefore better services are offered. However, studies on ICT convergence has not yet been applied to the agricultural safety field. Method: This study identified ICT convergence service technology trends and representative serious accident types mainly occurring in agricultural activities. This study defined the major factors of farm work accidents and ICT to solve those accident factors including the sensor technology, wired/wireless communication technology and location information service, and applied them to prototype PCB for the development of an agricultural safety monitoring system. Results: This study proposed an emergency monitoring system for farmers and a harmful environment monitoring system. The ICT technology to prevent farm work accidents can be summarized as sensing technology, ICT and network technology and user interface technology. This study also designed PCB module configuration and situation judgment algorithm as basic research for proposed monitoring system development. Conclusion: The ICT-based agricultural safety monitoring research proposed in this study is expected to become the basis to build a future real time monitoring system, and also is expected to contribute to social safety and welfare service improvement for farmers. Application: The ICT convergence farmer accident prevention system will make contributions to the prevention of serious farm work accidents.