• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.10
• /
• pp.1383-1389
• /
• 2004

The nutritive value and utilization of whole crop rice silage (WCRS), Hamasari, at yellow mature stage was determined by three studies. In first study, chemical composition, in vivo digestibility and metabolizable energy (ME) content of WCRS was determined by Holstein steers. WCRS contains 6.23% CP, its digestibility is 48.4% and estimated TDN is 56.4%. Its ME content was 1.91 Mcal/kg DM. Gross energy (GE) retention (% of GE intake) in steers is only 22.7% most of which was lost through feces (44.7% of GE intake). It takes 81 minutes to chew a kg of WCRS by steers. In another study, the effect of Hamasari at yellow mature stage at three stages of lactation (early, mid and late lactation) and two levels of concentrate (40 or 60%) on voluntary intake, ME content and ME intake, milk yield and composition using lactating Holstein dairy cows were investigated. Total intake increased with the concentrate level in early and mid lactation, but was similar irrespective of concentrate level in late lactation. WCRS intake was higher with 40% concentrate level than with 60% concentrate. ME intake by cows increased with the concentrate level and WCRS in early lactating cows with 40% concentrate can support only 90% of the ME requirement. Milk production in accordance with ME intake increased with the increase in concentrate level in early and mid lactating cows but was similar in late lactating cows irrespective of concentrate level. Fat and protein percent of milk in mid and late lactating cows were higher with for 60% concentrate than 40%, but reverse was in early lactating cows. Solids-not-fat was higher with for 60% concentrate than 40% concentrate. Finally in situ degradability of botanical fractions such as leaf, stem, head and whole WCRS, Hamasari at yellow mature stage was incubated from 0 to 96 h in Holstein steers to determine DM and N degradability characteristics of botanical fractions and whole WCRS. Both DM and N solubility, rate of degradation and effective degradability of leaf of silage was lower, but slowly degradable fraction was higher compared to stem and head. Solubility of DM and N of stem was higher than other fractions. The 48 h degradability, effective degradability and rate of degradation of leaf were always lower than stem or head. In conclusion, voluntary intake of silage ranged from 5 to 12 kg/d and was higher with low levels of concentrate, but milk yield was higher with high levels of concentrate. Fat corrected milk yield ranged from 19 to 37 kg per day. For consistency of milk, early lactating cows should not be allowed more than 40% whole crop rice silage in the diet, but late lactating cows may be allowed 60% whole crop rice silage.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.11-23
• /
• 2014

Wireless Mesh Network(WMN) has drawn much attention due to easy deployment and good scalability. Recently, major power utilities have been focusing on R&D to apply WMN technology in Smart Grid Network. Smart Grid is an intelligent electrical power network that can maximize energy efficiency through bidirectional communication between utility providers and customers with ICT(Information Communication Technology). It is necessary to guarantee QoS of some important data in Smart Grid system such as real-time data delivery. In this paper, we suggest QoS enhancement method for WMN based Smart Grid system using IEEE 802.11s. We analyze Smart Grid Application characteristics and apply IEEE 802.11s WMN scheme for Smart Grid in domestic power communication system. Performance evaluation is progressed using NS-2 simulator implementing IEEE 802.11s. The simulation results show that the QoS enhancement scheme can guarantee stable bandwidth irrespective of traffic condition due to IEEE 802.11s reservation mechanism.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.757-764
• /
• 2019

Depressurization occurs around underwater objects moving at high speeds. This causes cavitation nuclei to expand, resulting in cavitation. Cavitation is accompanied by an increase in noise and vibration at the site, particularly in the case of thrusters, and this has a detrimental ef ect on propulsion performance. Therefore, predicting cavitation is necessary. In this study, an analytical method for cavitation noise is developed and applied to an elliptic wing. First, computational fluid dynamics are performed to obtain information about the flow fields around the wing. Then, through the cavitation nuclei density function, number of cavitation nuclei is calculated using the initial radius of the nuclei and nuclei are randomly placed in the upstream with large pressure drop around the wing tip. Bubble dynamics are then applied to each nucleus using a Lagrangian approach for noise analysis and to determine cavitation behavior. Cavitation noise is identified as having the characteristics of broadband noise. Verification of analytical method is performed by comparing experimental results derived from the large cavitation tunnel at the Korea Research Institute of Ships & Ocean Engineering.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.575-579
• /
• 2006

Solid electrolyte interface is formed on a carbon electrode used as an anode in Li-ion battery, which can be of $Li^{+}$ intercalation/deintercalation during the first cycle. The passivation film formed by a solvent decomposition during the initial charge process affects cell performance and it was one of the main reason of an initial irreversible capacity. This paper describes the use, for the first time, of $Li_2CO_3$ as the additive for the formation of a passivation film on the carbon surface to suppress the initial irreversible reaction. Chronopotentiometry, cyclic voltammetry, and impedance spectroscopy were used to investigate the effects of the $Li_{2}CO_{3}$ additive. Scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction were also used to monitor changes in the surface morphology and composition of the passivation film formed by solvent decomposition and the precipitation of $Li_{2}CO_{3}$. The addition of $Li_{2}CO_{3}$ to a solution of 1 M $LiPF_{6}$/EC:MA (1:3, v/v) resulted in a decrease in the initial irreversible capacity and it was due to the suppression of the solvent decomposition on the electrode surface.

• Journal of National Security and Military Science
• /
• s.5
• /
• pp.241-280
• /
• 2007

This study examines the relationship of the industry-specific factors that effect innovation of manufacturing technology and the market share within the defense industry. Since the establishment of the basic defense industry framework in 1973, there were numerous interactions of the industry-specific factors of the defense industry structure with the technological innovation and market organization of the defense industry. During last three decades, the domestic defense industry has achieved the considerable level but the framework of the basic system has not developed much in areas of the military science and the defense manufacturing technology. Industry-specific factors were formed in the process and appeared in a variety of behavioral characteristics as subsystems. Currently, there IS a growing trend where the management of defense industry is gradually deteriorating due to limitation of the domestic industry-specific factor (e.g. defense technologies, amount of demand, etc.). If there is a prominent imbalance of the industry-specific factors. it can trigger the potential problem of conflict, lack of cooperation and control, slowing the growth of the manufacturing technology thereby diminishing the market and deteriorating the defense supply/demand relationship. In a research conducted by Joe S. Bain, Bain analyzed the relationship of the traditional industrial organization where industry-specific factor(S) not only impacts the conductor(C). And, conductor(C) influences the shaping of the performance(P) of relationship of the traditional industrial organization. Consequently, the researcher has identified the demand monopoly, barriers to entry, and market competition with comparison of defense industry issues. These defense issues were three industry-specific factors identified, which are 1) The demand monopoly and The entry barriers to new market competition, 2) the industrial technical factor to a production technical competitiveness and a market sharing competitiveness, 3) the probability factor to revolution for military affairs(RMA) and a R&D production. According to baseline with these factors, the following research model is established from the special companies group(Group A), the systematization companies group(Group B), and the general companies group(Group 0. The hypothesis is that if there are more industry-specific factors, then there will be more relationships of defense industry relation statutes. This research is an empirical study on the relationship that the industry specific factors effects the innovation of manufacturing technology and the shaping of the market in the defense industry. Moreover, the existing models to evaluate the industry specific factors of the defense industry IS much to be desired with the controlled statistical analysis of the result. It is vital to study on current situation with suggesting alternative strategy to the efficient strategy. The descriptive analysis approach analysis is conducted with SPSSWIN to conduct reliability test, factor analysis, correlation analysis, cross-tabulation analysis, one-way ANOVA, and multiple regression analysis. However, there were some limitations of the survey such as the rigidity of concept about the technical factors and various market management factors. The wishes is that the decision-maker could be utilized these defence industrial factors to formulate efficient defence policy and strategy in the future.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.1-4
• /
• 2006

Method of analyzing sodium alginate in foods was developed using high performance liquid chromatography (HPLC). HPLC conditions for sodium alginate were: column, MCI GEL $(8\;mm\;i.d{\times}300\;mm)$; mobile phase, deionized water; detector, refractive index detection (sensitivity = 16). Separation of sodium alginate was achieved within 15 min. Sodium alginate showed good linear relationship at 0.1-2.0% range. Correlation coefficient of calibration curve for sodium alginate exceeded 0.999, and detection limit was 0.005%. Recovery rate of sodium alginate in wheat flour dough was 106.67%. This method was successfully applied to analyses of cereals, saccharides, and ice cream, etc. Sodium alginate was detected in chocolate, noodles, and kelp at 0-44.8% range.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.679-688
• /
• 2021

In this study, we investigated the applicability of a termiticide based on metofluthrin for termite control on traditional wooden buildings. To evaluate their mortality, termites were exposed to the agent, diluted to various concentrations, for seven days; it was found that it had a sufficient insecticidal effect although there was a difference depending on the degree of agent dilution. Next, the effect on Dancheong, used in traditional wooden structures, was measured based on the color change according to the number of agent treatments. The results showed that only the color difference value of two pigments (i.e., Bun and Juhong) was measured as 3.0 or higher. However, there this varied according to the dilution ratio. Thus, it was found that most pigments had little effect on the color of Dancheong. Finally, the termiticidal efficacy of the agent when applied to wood was evaluated. We found that the specimens coated with 10-fold and 20-fold dilutions exhibited 2.83 and 6.28% mass loss, respectively. The 10-fold dilution satisfied the performance of termiticide as a mass loss of less than 3%. In conclusion, the metofluthrin-based agent used in this study has little effect on various Dancheong pigments and has a termiticidal effect against termites; it is therefore suggested that it may be used in preserving traditional wooden cultural properties in Korea.

• Korean Journal of Food Science and Technology
• /
• v.17 no.1
• /
• pp.37-40
• /
• 1985

The reactor performance of a coimmobilized glucose oxidase and catalase enzyme system was investigated. In the determination of efficiencies of glucose oxidase and catalase of dual, mixed and soluble systems, the dual type immobilized one was superior to either the soluble or to the mixed system. In the continuous plugflow bed reactor system of glucose oxidase and catalase, $k-d$, deactivation rare constant of glucose oxidase only and catalase/glucose oxidase = 10 were $1.12\;{\times}\;10^{-2}\;and\;2.17\;{\times}10^{-3}\;hr^{-1}$, respectively. In the effect of ${\tau}$, space time, the point of $O_2$ limitation is $5.5\;g{\cdot}hr/l$ in both catalase/glucose oxidase = 1 and 10. In the effect of $O_2$ concentration to reduce the $O_2$ diffusion limitation, it appeared that ${\tau}\;=\;8.3g{\cdot}r/l$ is the maximum point of $O_2$ concentration in both catalase/glucose oxidase = 1 and 10.

• Journal of Food Hygiene and Safety
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2011

A new and improved analytical method involving alkaline pyridine extraction was proposed to quantity chlorophyll contents in syrup and candy type chlorella products. The performance of analytical method was compared with the conventional Korea food standard method which involves acetone extraction. The application of sonication chlorophyll extraction form alkaline pyridine sample was also explored. The analytical procedure was validated by evaluating accuracy, precision and reproducibility. For liquid samples, the pyridine extraction method showed higher accuracy and precision compared to acetone extraction method. The CV values of pyridine extract method and the acetone extraction method were 18.82 and 40.0, and the accuracy to theoretical values were 106.3% and 78.1%, respectively. When sonication extraction method was applied to the pyridine extraction, the precision was improved as indicated by reduced CV values from 18.82 to 11.36. The improved performance of pyridine-sonication extraction was also validated by recovery test of chlorophyll that was previously spiked into the sample matrix. For solid matrix, the pyridine extraction method showed better performance in analysis of chlorophyll in solid food matrix (CV = 7.05) compared to conventional acetone extraction method (CV = 30.0). However, the accuracy to theoretical values of pyridine and acetone extraction methods only showed only 62.7% an 40%, respectively. The relatively low accuracy of pyridine extraction method (62.7%) was improved to 99.4% by applying additional sonication extraction method. The improved performance of applying additional sonication extraction was validated by standard deviation, CV values and accuracy to theoretical values.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.349-354
• /
• 2000

Abstract A facultative alkalophilic gram-negative Vibrio metschnikovii strain RH530, isolated from the wastewater, produced several alkaline proteases (VAP) including six alkaline serine proteases and a metalloprotease. From this strain, high yielding YAP mutants were isolated by NTG treatment. The isolated mutant KS1 showed nine times more activity than the wild-type after optimization of the culture media. The production was regulated by catabolite repression when glucose was added to the medium. The effects of several organic nitrogen sources on the production of the YAP were investigated to avoid catabolite repression. The combination of 4% wheat gluten meal (WGM), 1.5% cotton seed flour (eSF), and 5% soybean meal (SBM) resulted in the best production when supplemented with 1% NaCl. The YAP showed a resistance to surfactants such as $sodium-{\alpha}-olefin$ sulfonate (AOS), polyoxy ethylene oxide (POE), and sodium dodecyl sulfate (SDS), yet not to linear alkylbenzene sulfonate (LAS). However, the activity of the YAP was restored completely when incubated with LAS in the presence of POE or $Na_2SO_4$. The YAP was stable in a liquid laundry detergent containing 6.6% SLES (sodium lauryl ether sulfate), 6.6% LAS, 19.8% POE, and stabilizing agents for more than two weeks at $40^{\circ}C$, but the stability was sharply decreased even after 1 day when incubated at $60^{\circ}C$. A washing performance test with the YAP exhibited it to be a good washing power by showing 51 % and 60% activity at $25^{\circ}C{\;}and{\;}40^{\circ}C$, respectively, thereby indicating that the YAP also has a good detergency at a low temperature. All the results suggest that the YAP produced from the mutant strain KSI has suitable properties for use in laundry detergents.rgents.