• The Korean Journal of Ecology
• /
• v.6 no.1
• /
• pp.22-32
• /
• 1983

The paper is investigation of the secondary vegeation and succession at the forest fire area in Mt. Palgong. The survey was carried out from April, 1981 to Stempter, 1982. The floristic compositions were as follows: 50 families, 116 genera, 127 species, 15 varieties and 3 formae(145 kinds). Among them, the floristic composition of the pine floor vegetation of the unburned area was 43 families, 80 genera, 88 species, 10 varieties and 1 forma(99 kinds), and that of the secondary vegetatiion after forest fire was 46 families, 106 genera, 120 species, 14 varieties and 3 formae(137 kinds). Index of similarity between the burned and unburned area was 0.77. The biological type succeeded in $H-D_1-R_5$type, and the erect form(s) was prevailed. Carex humilis var. nana, Miscanthus sinensis var. purpurascens, and lespedeza cyrtobotrya were dominant species in the $ B_1; and; B_2$ area of the seventh year after forest fire. In the degree of succession, species diversity, and evenness index, DS, H, and e of the $B_1$ area were higher than those of the $B_2$ area. In the soil properties, it assumed that pH, total nitrogen, and available phosphores of the burned area were nearly recovered to those of the unburned area.

• Journal of the Society of Disaster Information
• /
• v.10 no.3
• /
• pp.458-464
• /
• 2014

Fire protection (sprinkler) piping system is an essential element for the energy supply and for the protection against the seismic-induced fire during and after an earthquake. The primary objective of this study was to understand the seismic performance of complex two-story piping system installed in a low-rise building subjected to bi-directional and three-directional earthquakes. The result of current study revealed that the displacement of the piping system in accordance with floor level was significantly different due to acceleration-sensitivity but the effect of the piping system due to the vertical direction earthquake was not significant.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.1
• /
• pp.17-23
• /
• 2018

A fire simulation was performed to analyze the temperature and smoke exhaust performance of roof vents of the arcade traditional market by comparing a basic model (Case A) and an improvement model (Case B~Case E). Temperature analysis by heat showed a low temperature distribution because Case E discharged smoke in both directions of length compared to other cases. However, the effect of heat by life safety standards was satisfied. The smoke exhaust analysis by smoke showed the highest performance because Case C was exhausted to 1 m on both sides of length.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.2
• /
• pp.141-147
• /
• 2003

In this paper, the vibration characteristics of a linear stepping motor(LSM) are analyzed using the finite element method(FEM : Flux2D) and ACSL. A magnetic equivalent circuit is based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. A normal force is calculated using FEM. And the vibration characteristics of the LSM are simulated by the ACSL with the voltage equations, the thrust equations, the normal force equations and the kinetic equations, and are measured by LASER experimental system.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.7-14
• /
• 2019

While wood pellets are often used as a fuel in thermoelectric power plants and firewood boilers, there is a risk of ignition temperature when strong wood pellets, which have a high calorific value, for prolonged periods of time. In this research study, the minimum auto ignition temperature and the ignition limitation temperature according to the change in flow rate depending on the size of the test vessel were calculated, and based on these temperatures, the apparent activation energy was calculated to predict the combustive properties of the material. The apparent activation energy was calculated to be 190.224 kJ/mol. The thicker the sample is storage in the vessel, the longer the ignition induction time was due to the increased difficulty in heat being transferred from the surface of the vessel to the middle section area of the vessel. For vessel of the same size, the higher the flow rate, the lower the auto ignition temperature was. It was also confirmed that increases in the size of the test vessel lowered the auto ignition temperature and increased the ignition induction time.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.26-29
• /
• 2012

본 연구에서는 목분-폴리프로필렌 복합재의 연소성 및 열적특성을 평가하기 위하여 한계산소지수 실험 및 열중량 분석실험을 실시하였다. 목분-폴리프로필렌 복합재의 제조를 위하여 이축압출기를 활용한 압출공정과 사출성형기를 활용한 사출공정을 이용하였다. 그리고 복합재의 난연성능 향상을 위하여 난연제(4종류)를 첨가한 복합체의 화재성능을 평가하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.2
• /
• pp.22-27
• /
• 1982

This experiment was carried out to evaluate the results of fire retardancy of sealer coated plywood by Building material combustibility tester and Inclined panel tester. At this study, weight loss percentage, flame exhausted time, burning point and smoke yield coefficient were examined. The findings of this study lead to conclusions as listed below. 1. It was obvious that weight loss percentage and flame exhausted time of Inclined panel tester had more remarkable tendency than those of Building material combustibility tester. 2. Burning point was determined by Inclined panel tester while smoke yield coefficient by Building material combustibility tester. 3. Weight loss percentage decreased remarkably with proportion to the increase of sealer coated amount during 5 minutes burning. 4. Flame exhausted time decreased with proportion to the increase of sealer coated amount during 3 minutes burning. 5. Burning point indicated increasing tendency with proportion to the increase of sealer coated amount. 6. Smoke yield coefficient of urea scaler showed definite inclination decreasing with the increase of sealer coated amount.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.317-322
• /
• 2017

When the heat flux on the heating surface following changing heat condition in the boiling heat transfer system exceeds critical heat flux, the critical heat flux phenomenon is going over to immediately the film boiling area and then it is occurred the physical destruction phenomenon of various heat transfer systems. In order to maximize the safe operation and performance of the heat transfer system, it is essential to improve the CHF(Critical Heat Flux) of the system. Therefore, we have analysis the effect of improving CHF and characteristics of heat transfer following the nanoparticle coating thickness. As the results, copper nanocoating time are increased to CHF, and in case of nano-coatings are increased spray-deposited coating times more than in the fure water; copper nanopowder is increased up to 6.40%. The boiling heat transfer coefficients of the pure water are increased up to 5.79% respectively. Also, the contact angle is decreased and surface roughness is increased when nano-coating time is increasingly going up.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.76-81
• /
• 2013

In our former study, we proposed that the AC-Model might be applied to various conditions. And we also introduced the method for daylighting that it was possible to reduce discomfort glare and to improve visual impressions as the supplementary type and blind-control type on the compound lighting. The purpose of this study was to examine the relationship between physical elements and psychological evaluation of lighting space. The study was made using an full-size space, which were equipped with various luminaries. We investigated the relationship between subjective evaluation and characteristics of light distribution and showed the high correlation between the evaluation rating and luminance distribution over whole room.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.3
• /
• pp.145-162
• /
• 2021

Purpose: The 2018 General survey of emergency assistance was conducted to examine the working conditions and welfare, including educational direction, interests, and awareness of work, of the fire department emergency medical technicians (EMT). This would be used as basic data for future policy directions. Methods: Among the fire-fighting officers in 16 cities nationwide, emergency rescue workers engaged in first-aid activities were targeted. With prior consent, a survey was conducted through electronic documents. Of the total 1,227 people, responses from 1,151 were finally analyzed, excluding 76 who did not respond appropriately. Results: The working conditions and welfare of 119 firefighters were moderate, but in the fields of education and interest, the learning according to the regulations was high. In particular, satisfaction with the scope of work was found to be below average. However, it was positive that it will play a role as a social safety net in the future and will converge with cutting-edge science. Conclusion: Although this study was a total investigation of the EMT survey, conducting an EMT survey on all fire fighters in Korea is difficult. Further research is needed, particularly on first-class emergency medical personnel who play a major role in 119 paramedics.