• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.719-726
• /
• 2000

A real-time precise positioning is possible with GPS carrier phase measurements with efficient integer ambiguity resolution techniques. It is known that more reliable and fast integer ambiguity resolution is possi-ble as the number of measurements increases. Most precise positioning systems use dual frequency measurements and the wide-lnae technique to resolve integer ambiguity. The wide-lane technique magnifies the measurement noise while it reduces the number of candidates to be examined. In this paper a new integer ambiguity resolution method using dual frequency is proposed The proposed method utilizes the relationship between the wide-lane single frequency and the narrow-lane ambiguities to resolve narrow-lane integer ambiguity after fixing the wide-lane integer ambiguity. Experiments with real data show that the proposed method gives fast and reliable results.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.41-48
• /
• 2014

PURPOSES : The lane width of the domestic highway is 3.5 ~ 3.6m and it has been designed nationwide. However, the distribution of the average vehicle widths, rearview mirror widths and lateral wheel paths by region appear different. Then, lane spare widths may differ by region followingly. Thus, the flexible design of freeway lane widths is required. METHODS : The methodologies of this paper are as follows. First, vehicle widths rearview mirror widths lateral wheel paths of vehicles driven four national expressways were measured. Second, lane spare widths by vehicle widths were calculated. Third, lane spare widths reflecting rearview mirror widths were calculated by using interval estimation. Additionally, lane spare widths reflecting vehicles lateral wheel paths were calculated. RESULTS : The results of this paper are as follows. First, lane spare widths by vehicle widths ranges 0.83 to 0.95m. Second, lane spare widths reflecting rearview mirror widths ranges 0.518 to 0.747m at the confidence interval 95%. Third, lane spare widths reflecting vehicles' lateral wheel paths ranges -0.022 to 0.322m at the curved sections and the confidence interval 95%. CONCLUSIONS : It may be concluded that the present lane spare widths are relatively narrow at the curved section. Thus, there is a need to consider expanded lane widths at the curved sections. Additionally, there is a need to consider flexible design of lane widths by various conditions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.2
• /
• pp.1-12
• /
• 1996

In order to develope a road landscape that is in harmony with landscaping purpose, degree of sight occupation by slopes at road sides was measured and physical elements composing the slope scenery were visually evaluated and the results are as follows : In analysis of sight occupation ratio by perspective method, gradient of the slopes influenced more on the sight occupation than height did and the driving lane occupied 2 to 3% more proportion of sight than the passing lane. When there is slope at one side of the road, difference in sight occupation between the lanes was increasing with deceased height and with increased gradient of the slopes. In visual analysis of the slope scenery, negative image was increasing with narrow road, increased height and gradient of the slopes. In visual analysis of the slope scenery, negative image was increasing with narrow road, increased height and gradient of the slopes. Particularly, the effect of gradient was critical on scenery. The effect of the slopes was negative at 60$^{\circ}$ or more but positive at 45$^{\circ}$or less gradient. This phenomenon was more conspicuous with wide 4 lane roads than wide 2 lane roads. Although direct comparison is difficult due to a great difference between Korea and U.S.A. in climate, land condition, road dimension, and public process of purchasing land, etc, it is desirable to treat road sides so that the scenery is in harmony with landscape around as well as emphasizing the regional characteristics, also giving friendly and comfortable image to drivers and nearby residents in addition to safety as can be seen in U.S.A.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.815-818
• /
• 2016

Forward collision warning systems(FCWS) and lane departure warning systems(LDWS) need regions of interest for detecting lanes and objects as road regions. In general, the lane departure warning system using a vehicle front camera is tracking a lane curve using RANSAC or the like in the form of a straight line obtained image are compared with the center of the vehicle. This algorithm has weaknesses that requires a wide range of the lane being vulnerable to the curve. This paper presents an algorithm that checks whether the current lane departure by car from the Top-view space. The algorithm also can check whether the vehicle in the lane departure of the narrow range, and shows the result that is almost not affected by noise.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.756-761
• /
• 2010

Bimodal trams are run by a guidance system and combine the functions of buses and trains. The trams have been highlighted as an alternative means of public transportation due to their accessibility, mobility, and arrival accuracy. While bimodal trams can be implemented on existing roads or by road expansion, with the narrow road conditions in Korea, studies must be performed in advance on suitable lane and platform locations and the exclusivity of lane use. This paper proposes plans for the location of bimodal tram lanes and platforms, whether in the median or at the road’s edge. In addition, methods of efficient bimodal tram operation are discussed, including the implementation of exclusive tram lanes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.158-164
• /
• 2015

Lane detection is one of the key parts among autonomous vehicle technologies because lane keeping and path planning are based on lane detection. Camera is used for lane detection but there are severe limitations such as narrow field of view and effect of illumination. On the other hands, Lidar sensor has the merits of having large field of view and being little influenced by illumination because it uses intensity information. Existing researches that use methods such as Hough transform, histogram hardly handle multiple lanes in the co-occuring situation of lanes and road marking. In this paper, we propose a method based on RANSAC and regularization which provides a stable and precise detection result in the co-occuring situation of lanes and road marking in highway scenarios. This is performed by precise lane point extraction using circular model RANSAC and regularization aided least square fitting. Through quantitative evaluation, we verify that the proposed algorithm is capable of multi lane detection with high accuracy in real-time on our own acquired road data.

• The Journal of Korea Robotics Society
• /
• v.4 no.2
• /
• pp.121-129
• /
• 2009

This paper presents a goal-directed reactive obstacle avoidance method based on lane method. The reactive collision avoidance is necessarily required for a robot to navigate autonomously in dynamic environments. Many methods are suggested to implement this concept and one of them is the lane method. The lane method divides the environment into lanes and then chooses the best lane to follow. The proposed method does not use the discrete lane but chooses a line closest to the original target line without collision when an obstacle is detected, thus it has a merit in the aspect of running time and it is more proper for narrow corridor environment. If an obstacle disturbs the movement of a robot by blocking a target path, a robot generates a temporary target line, which is parallel to an original target line and tangential to an obstacle circle, to avoid a collision with an obstacle and changes to and follows that line until an obstacle is removed. After an obstacle is clear, a robot returns to an original target line and proceeds to the goal point. Obstacleis recognized by laser range finder sensor and represented by a circle. Our method has been implemented and tested in a corridor environment and experimental results show that our method can work reliably.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.125-130
• /
• 2004

As an application of GPS is increased by world geodetic system introduction gradually, in this time, It is increased necessary of GPS baseline analysis program development. In this study, I developed a baseline analysis program by L1/L2 carrier. And I compared a baseline analysis result with a commercial program. I showed precision of approximately ${\pm}$1cm in a baseline length in case of Narrow lane as a result that a baseline analysised a developed program.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.84.3-85
• /
• 2015

We report a small-scale EUV bright loop associated with the evolution of the fine-scale magnetic discontinuity in the photosphere. Our analysis was carried out by using the high spatial resolution data taken with InfraRed Imaging Magnetograph (IRIM) and the Fast Imaging Solar Spectrograph (FISS). As a result, an extremely narrow dark lane of the intense horizontal magnetic field (width ~ 300 km) is detected parallel to the boundary of the magnetic pore, which is one of the footpoints of the small-scale bright coronal loop. We find that the variation of the net linear polarization inside the dark lane is closely related to the intensity variations of the coronal loop. Based on our results, we suggest that small-scale atmospheric heating such as bright coronal loop seen above the complex pore group may be strongly affected by the evolution of the fine-scale magnetic discontinuity in the photosphere. This is a nice example of solar atmospheric heatings associated with the fine-scale magnetic discontinuity in the photosphere.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2015

PURPOSES : The purpose of this study is to revise the weight to power ratio of the representative truck in S. Korea. So far, S. Korea has been using the unit lb/hp, and the construction machines were not considered in the evaluation of the performance of trucks. METHODS : This study was performed to recommend the use of ISO system of units, and to analyze the weight to power ratios of the representative trucks in S. Korea, including the dump trucks, concrete mixer trucks, and asphalt and concrete diffusers. RESULTS: From this study, the 85 percentile value of the weight to power ratio of the trucks in S. Korea's was found to be 103.6 kg/kw. CONCLUSIONS : The performance standard for the representative truck has to be increased upward, considering the travel pattern of the dump trucks, concrete mixers, and asphalt and concrete diffuser trucks, travel distances, narrow area (work zone) of operation, and the saving in construction budget for climbing lane. Based on this study, the weight to power ratio of the representative truck in S. Korea could possibly be revised to 100~110 kg/kW.