• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.299-307
• /
• 2018

Considering a nonlinear high power amplifier(HPA) and a predistorter, we have designed a four-dimensional 8-ary phase shift keying trellis-coded modulation(4D-8PSK-TCM) system, which is recommended for X-band satellite communications. Subsequently, we have evaluated and analyzed the spectrum, constellation characteristics, and BER performance of the system. In satellite communications, owing to the limited power, nonlinear characteristics that determine the operating point of the HPA must be analyzed because the HPA consumes high power. We herein report the design of the 4D-8PSK-TCM system, with efficiencies of 2 and 2.25 bits/channel-symbol. The simulation results confirmed that a 0.35 roll-off value is effective, considering the low peak-to-average power ratio(PAPR) characteristic and the narrow occupation bandwidth of the spectrum. It also confirmed that approximately 15~20 dB of output backoff(OBO) value is required at the HPA when the predistorter is not used, and approximately 1 dB of the OBO value is required when the predistorter is used.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1711-1715
• /
• 2007

하천에서는 나라마다 하천마다 구간마다 독특한 하도특성을 지니고 있다. 우리나라는 전 국토의 70 %가 산지로 이루어져 있으며, 이로 인하여 특이한 하도형태의 모습을 보이는 구간이 산재하고 있다. 그 대표적인 모습이 충적하도와 침식하도가 연속해 발생하는 과정에서 나타나는 것이 하천 협착부 구간이다. 이러한 하천협착부 주변지역은 전형적인 수해상습 구간이 되는 경우가 많다. 이러한 상황임에도 불구하고 현재까지 우리 나라에서는 이러한 협착부 구간에서 하도특성을 반영한 연구 및 설계 사례가 전무한 실정이다. 따라서, 본 연구에서는 낙동강 선산지역의 하천 협착부에서의 하도 수리학적 의미와 하도형태에 대하여 조사하고 분석하였다. 연구 결과, 모래하천인 조사구간의 저수로 하상에서 아주 미세한 유사분급 현상은 확인할 수 있었지만, 명쾌한 자연 영력에 의한 유사분급 현상이라 판단하기에는 어려운 부분이 있었다. 이는 완만한 하상경사, 균일성에 가까운 하상재료의 공급에 기인한다고 추정할 수 있었다. 그러나 이와 같은 자연적인 현상보다는 골재채취 등의 원인에 따른 유사분급이 확연하다고 추정되었다. 그리고 협착부의 배수구역에서 과거 활발했던 이동상 단단면 하도형태가 유심부의 이동과 더불어 최근 급격하게 복단면화가 진행되고 있음을 확인하였다. 이와 더불어 저수로의 하폭이 크게 줄어드는 현상을 확인할 수 있었다. 이와 같은 현상은 궁극적으로 이상홍수 발생시의 복단면 가중 또는 홍수단면적 축소, 저수로에서의 호안 또는 제방 아래부분의 국소세굴이 야기될 수 있음을 시사한다.원주교각에 대한 국부세굴 특성을 검토하였다. 또한 원주형의 교각에서는 단일원주보다는 원주군으로 설치되는 경우가 대부분이며 이때 교각의 직경(D)에 대한 교각 사이 간격$(L_d)$의 비$(L_d/D)$에 따른 전면교각에서의 수류변화의 영향이 후면교각에 작용하여 상호 복합적인 흐름 및 세굴특성을 나타내므로 이와 같은 복렬형 원주군의 세굴특성을 파상형 원주교각에 적용하여 국부세굴의 크기 변화를 해석하였다. 따라서, 교각주위에서의 수류특성 및 세굴의 변동은 원주군 및 교각파상의 크기와 간격 등과 같은 구조물의 배열조건과 Froude 수, 수심 등의 수리학적 조건에 따라 달라지므로 이의 조건을 체계적으로 변화시켜 가면서 교각주위에서의 국부세굴 및 세굴 감소특성을 검토하였다. 실험결과 오목 및 볼록 파상형 원주 주위에서의 세굴크기는 원형원주와 비교하여 전체적으로 감소하는 것으로 확인되었으며 특히 오목형 $B/\acute{h}=3$에서는 세굴경감효과가 탁월하여 70%이상 감소하는 것으로 확인되었으나 볼록형 $B/\acute{h}=5$에서는 세굴촉진특성이 나타나고 있는 것으로 나타났다. 따라서, 파상형 원주에서는 하강류나 와류를 파상형의 내부로 유도하여 세굴의 크기를 조절할 수 있는 최적의 파상이 존재하고 있는 것으로 예측되었다.원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.305-318
• /
• 2002

We have constructed two flight models of airglow photometer system (AGP) to be onboard Korea Sounding Rocket-III (KSR-III) for detection of MUV dayglow above the Korean peninsular. The AGP system is designed to detect dayglow emissions of OI 2972${\AA}$, $N_2$ VK(0,6) 2780${\AA}$, $N_2$ 2PG 3150${\AA}$ and background 3070${\AA}$ toward the horizon at altitudes between 100 km and 300 km. The AGP system consists of a photometer body, a baffle an electronic control unit and a battery unit. The MUV dayglow emissions enter through a narrow band interference filter and focusing lens of the photometer, which contains an ultraviolet sensitive photomultiplier tube. The photometer is equipped with an in-flight calibration light source on a circular plane that will rotate at the rocket's apogee. A bane tube is installed at the entry of the photometer in order to block strong scattering lights from the lower atmosphere. We have carried out laboratory measurements of sensitivity and in-flight calibration light source for the AGP flight models. Although absolute sensitivities of the AGP flight models could not be determined in the country, relative sensitivities among channels are well measured so that observation data during rocket flight in the future can be analyzed with confidence.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.582-587
• /
• 2004

Ultrasonic sensors are widely used in mobile robot applications to recognize external environments, because they are cheap, easy to use, and robust under varying lighting conditions. However, the recognition of objects using a ultrasonic sensor is not so easy due to its characteristics such as narrow beam width and no reflected signal from a inclined object. As one of the alternatives to resolve these problems, use of multiple sensors has been studied. A sequential driving system needs a long measurement time and does not take advantage of multiple sensors. Simultaneous and pulse coding driving system of ultrasonic sensor array cannot measure short distance as the length of the code becomes long. This problem can be resolved by multi-frequency driving of ultrasonic sensors, which allows multi-sensors to be fired simultaneously and adjacent objects to be distinguished. Accordingly, this paper presents a simultaneous and multi-frequency driving system for an ultrasonic sensor array for object recognition. The proposed system is designed and implemented using a DSP and FPGA. A micro-controller board is made using a DSP, Polaroid 6500 ranging modules are modified for firing the multi-frequency signals, and a 5-channel frequency modulated signal generating board is made using a FPGA. To verify the proposed method, experiments were conducted in an environment with overlapping signals, and the flight distances for each sensor were obtained from filtering of the received overlapping signals and calculation of the time-of-flights.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1009-1017
• /
• 2001

The acousto-optical spectrometer is designed by using 1 GHz bandwidth acousto-optic deflector for radio signal analysis. This system is a high resolution wide band spectrometer which uses I GHz bandwidth and a total of 2,048 channel charge coupled device. When we measured the spectrums of signals deflected by acousto-optical spectrometer, we confirmed the stability of the total system by repetitive observations of the same frequency, and each part of the system worked well. We installed this system onto 60 cm radio telescope, and observed 12CO(J= 1 ∼0) emission lines around CRL 2688, IRC 10216 and NGC 5005 Galaxy center. We could observe effectively very narrow band width radio spectrum as well as wide band radio spectrum. We also confirmed high sensitivity and resolution in observation of 12CO(J-10) omission line of NGC 5005 Galaxy center which is a weak signal.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.74-78
• /
• 2003

Multi-channel images of 11-MUA and 11-MUOH self-assembled monolayers were obtained by using two-dimensional surface plasmon resonance (SPR) absorption. Patterning process was simplified by exploiting direct photo-oxidation of thiol bonding (photolysis) instead of conventional photolithography. Sharper images were resolved by using a white light source in combination with a narrow bandpass filter in the visible region, minimizing the diffraction patterns on the images. The line profile calibration of the image contrast caused by different resonance conditions at each points on the sensor surface (at a fixed incident angle) enables us to discriminate the monolayer thickness in sub-nanometer scale. Furthermore, there is no signal degradation such as photo bleaching or quenching which are common in the detection methods based on the fluorescence.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.4
• /
• pp.37-41
• /
• 2012

Due to global warming, the need to secure alternative resources has become more important nationally. Because of the very strong current on the west coast, with a tidal range of up to 10 m, there are many suitable sites for the application of TCP (tidal current power) in Korea. In the southwest region, a strong current is created in the narrow channels between the numerous islands. A rotor is an essential component that can convert tidal current energy into rotational energy to generate electricity. The design optimization of a rotor is very important to maximize the power production. The performance of a rotor can be determined using various parameters, including the number of blades, shape, sectional size, diameter, etc. There are many offshore jetties and piers with high current velocities. Thus, a VAT (vertical axis turbine) system, which can generate power regardless of flow direction changes, could be effectively applied to cylindrical structures. A VAT system could give an advantage to a caisson-type breakwater because it allows water to circulate well. This paper introduces a multi-layer vertical axis tidal current power system. A Savonius turbine was designed, and a performance analysis was carried out using CFD. A physical model was also demonstrated in CWC, and the results are compared with CFD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8C
• /
• pp.529-535
• /
• 2011

After permission for utilization of TV white space by FCC, a lot of attentions are focused on spectrum sensing, and various spectrum sensing methods have been proposed. However, they do not consider real environment, thus they are hard to achieve the required performance. In this paper, we propose resolutions for the problem which could be occurred in implementation of spectrum sensing module and verify performance of the proposed methods with computer simulation. The first proposed method utilizes channel status information to separate received signal and spurious for reducing false alarm probability caused by system internal spurious. The another proposed scheme is subband normalization method to prevent miss detection caused by multiple narrow band signals with different received signal strength. The simulation results verify that we can prevent false alarm cause by spurious components with the proposed system internal spurious cognition. Moreover, the proposed subband normalization method shows that it could overcome performance degradation caused by received signal strength difference.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.633-640
• /
• 2011

In this study, the stabilization of an edge flame and the intensity variation of a diffusion branch were investigated using a multi-slot combustor under conditions of high temperature and small fuel-concentration gradient (FCG). The combustor consists of three narrow channels: a quartz channel and two side-heating combustors. For the accuracy of this experimental study, quantitative analysis was carried out for each boundary condition. Stable edge flames could be observed under high-temperature conditions by controlling the FCG and fuel dilution ratio. Moreover, it was found that the intensity of the diffusion flame was increased by increasing the temperature of the mixture. On the contrary, the intensity of the diffusion flame was decreased by increasing the dilution ratio. It was also found that a propane flame is more sensitively affected by these experimental parameters than a methane flame.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.879-894
• /
• 2016

In micro-fluid systems, fluids are injected into extremely narrow polymer channels in small amounts such as micro-, nano-, or pico-liter scales. These channels themselves are embedded on tiny chips. Various specialized structures in the chips including pumps, valves, and channels allow the chips to accept different types of fluids to be entered the channel and along with flowing through the channels, exert their effects in the framework of different reactions. The chips are generally crystal, silicon, or elastomer in texture. These highly organized structures are equipped with discharging channels through which products as well as wastes of the reactions are secreted out. A particular advantage regarding the use of fluids in micro-scales over macro-scales lies in the fact that these fluids are much better processed in the chips when they applied as micro-scales. When the laboratory is miniaturized as a microchip and solutions are injected on a micro-scale, this combination makes a specialized construction referred to as "lab-on-chip". Taken together, micro-fluids are among the novel technologies which further than declining the costs; enhancing the test repeatability, sensitivity, accuracy, and speed; are emerged as widespread technology in laboratory diagnosis. They can be utilized for monitoring a wide spectrum of biological disorders including different types of cancers. When these microchips are used for cancer monitoring, circulatory tumor cells play a fundamental role.