• 대한치과의사협회지
• /
• 제54권4호
• /
• pp.296-305
• /
• 2016

Narrow zone of attached gingiva and shallow vestibule around the implants might contribute to difficulty of cleasing, periimplant mucositis caused by incomplete cleansing and further peri-implantitis. The aim of this case report is to present modification of soft tissue biotype around the implants by free gingival grafts according to timing of surgical intervention and shape of free gingiva. A 44 year-old male patient had a missing area on lower right second molar area with 1 to 2 mm of narrow attached gingiva zone and wanted to be treated by implant placement. In radiographic analysis, there was enough alveolar bone to install an implant, free gingiva from hard palate was grafted following implant placement using double layer flap. The width of attached gingival was increased to 4 to 5mm and well maintained during 5 months of follow up. A 69 year-old female patient also had a missing area on lower right first and second molar area with 1 to 2 mm narrow attached gingiva. Since she had systematically angina pectoris and dental phobia, minimal invasive free gingival graft after implants placement was planned. After 2 months of implant surgery, free gingival graft surgery was performed with healing abutments connection. The grafted gingiva was composed of two strip shaped free gingiva, and they were immobilized by periodontal pack. The width of attached gingival was increased to 4 to 5mm and well maintained during 10 months of follow up. With prosthesis delivery, the patients recovered ideal periodontal environment around implants and masticatory function. In conclusion, periodontal health and masticatory function could be achieved through implant placement and free gingival graft.

• 한국의학물리학회지:의학물리
• /
• 제7권1호
• /
• pp.53-64
• /
• 1996

목적 : 별모양무늬를 이용하여 원격 방사선치료기의 회전축의 정확성을 평가할 때 방사선의 진행방향을 고려해야 하는 이론적 근거와 방법을 개발하고, 방사선의 진행방향이 기록되지 않는 경우 길이 방향의 비대칭 조사면을 이용하여 흉내내는 방법을 개발하는 것이다. 방법 : 갠트리 회전축의 기계적 정확성을 평가하기 위해 방사선의 진행방향을 고려하였다. 좁은 조사면에 의해 별모양무늬를 만들어 회전축이라고 어림되는 교점에서 l0cm 떨어진 위치의 측방선량분포를 필름농도계로 측정하여 선축의 좌표를 구하고 하나의 선축에 있는 한 쌍의 좌표를 이용하여 선축의 식을 구한다. 선축과 일치하는 방사선 진행방향의 단위벡터 equation omitted를 구하고 가정된 회전축의 좌표에서 각 선축으로 향하는 벡터 equation omitted와 equation omitted의 벡터곱 equation omitted$\times$equation omitted을 구하여 평균을 취하고 평균에 대한 벡터곱의 최소자승법을 적용하여 회전축의 좌표를 구한다. 그 때 벡터곱의 최대치의 절대값이 구하는 회전축의 정확도이다. 방사선의 진행방향을 고려할 수 없는 콜리메이터와 치료대에 대해서는 진행방향에 대응하는 것으로 긴 방향이 비대칭인 조사면을 이용하였다. 결과 : 동일한 별모양 무늬에 대해 방사선의 진행방향을 고려할 때 회전축의 기계적 정확성이 진행방향을 무시할 때와 다르게 평가되었다. 결론 : 별모양 무늬를 이용하여 원격치료기의 기계적 정확성을 평가할 때는 방사선의 진행방향을 고려하거나 흉내내어 정량적으로 평가해야 한다.

• 한국주거학회논문집
• /
• 제16권3호
• /
• pp.119-125
• /
• 2005

This study is designed to suggest future development guidelines for leave-out lands in the land readjustment project area. For this purpose, physical conditions which affect living conditions were surveyed. The findings are follows. First, the living conditions in the lands are low with shortage of parking space and green area, narrow and low-performance road conditions, disordered fence and roof. Furthermore, illegal waste disposal made the condition even worse. Second, it is desirable to make separated plan for the leave-out lands because they have quite different living conditions from those of the land readjustment project area. Third, it is suggested that urban planning and architectural laws should pay attention to the leave-out lands to improve living conditions. It is also recommended that planning obligations for the leave out land should be imposed on land developers.

• 가정과삶의질연구
• /
• 제22권6호
• /
• pp.1-11
• /
• 2004

The purpose of this study was to provide basic information about efficient space use in the dining and bathing area through the analysis of service flowing. Four researchers observed the service flowing and the using behavior at those areas. The results of the study were as follows: Dining service was proceeded as resident moving, waiting, meal serving, dining, moving and arranging in order. The waiting stage was one of the problematic processes since the staffs made the residents wait to) long at a fixed position. The program right before the meal serving will be helpful for reducing tediousness of the elderly residents. Another problem was that the area was not big enough for the meal sowing. The legal regulation Is needed to prescnbe for the size of dining area per resident. The flowing of bathing service was proceeded as staff preparation, moving, waiting, undressing, bathing, drying, dressing, moving and arranging in order. There were more problems in the dressing area than in the bathing area. The elderly with stretcher or wheelchairs had difficulty in entering the narrow doorway. The dressing area was so crowded with the staffs, undressed elderly, dressed elderly, and other laundries. The division of dressing and undressing area is required to avoid the confusion of the users in the area.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 제 23회 정기총회 및 추계학술발표회
• /
• pp.11-25
• /
• 1998

Many Countries have made efforts to assist ships navigate accurately , safely and expeditiously for the safety control against increasing marine traffic , in their coastal waters. However, they are exposed in spite of these efforts,to risks of casulaties and marine polluation caused by traffic congestion when ships are navigating through waterways approaches to ports or harbors and in narrow fairways. Therefore, efficient control of VTS in Port is necessary nowadays to provide ships with necessary service , which interacts with shipping and organize the flow of traffic so as to maximize the efficiency of the port or harbor while minimizing the risk of accident and environmental pollution. Even though the navigation condition of ships is very inferior compared to other ports in Korea, such as the big difference between the ebb and flood tide, the frequent fog, the narrow fairway , the density of navigation traffic in Inchon Port is high and transportation quantity of dangerous cargoe increases gradually. In cosideration of the characteristics of natural circumstance and traffic circumstance the VTS established newly in Inchon port have to operate efficiently. The purpose of this study is to help efficient operation of VTS in Inchon port by accomplishing both the literature research and questionnaire survey. Questionnaire survey was read to the VTS personnel in Inchon Port and customer familiar to Inchon Port such as ship navigators, pilots, shipping companies and so on. Most of ship navigators who occupy half of the respondents are Korean Officer who had responded while they were calling at Inchon port. The conclusions and recommendations includes ; First, the service area should be extended over Designated area to provide the vessel with navigational assistance service regarding the information of traffic congestion area, fishing boat and small ship's activities. Second, the types of information service to be offered are ship's movement and weather condition inthe vicinity of the port and state of fairway in the approaching channel to thte fairway. Third, VTS personnel should be upgraded by the on-the-job training and continuous simulation training as well as supplement of the qualified personnel for VTS operation. Fourth , the Harbor Master System to be introduced for safe navigation and efficient port operation.

• 한국의류학회지
• /
• 제14권4호
• /
• pp.274-280
• /
• 1990

This paper is intended to grasp the characteristics of many bodices patterns which have been shown so far. The way is by selecting four characteristic kinds of patterns, making blouses offer the patterns and measuring ease. In measuring the degree of ease, $Scheff\`{e}'s$ paired comparison is made use of. In analysis, variation ratio has come out of analysis of variance, and significance is tested by producing estimated values between patterns. The Result is summed up as follows. 1. After wearing blouses made ofter different basic patterns and measuring ease, the analysis of variance is made about the sensory value of ease. The result is as follows. 1) In the ease of different patterns, all the areas are significant at the level of $1\%$ , regard- less of movements. 2) Under the influence of movements, the back area of arm hole is significant at the level of $5\%$ in narrow movements, and the front and the back area of arm hole are each significant at the level of $1\%$ in wide movements. 3) In the interaction of patterns and movements, bust and the under area of arm hole are each significant at the level of $1\%$ in narrow movements, and bust is significant at the level of $1\%$ in wide movements. 2. When comparing estimated values between patterns, the value of c is the largest and in the order of b,4, a. And in the other movements, the order changes into c,d, b and a. Thus the ease of blouses is different according to patterns. The reason for this is that the amount of ease of bust, the amount and location of darts, and sleeve cap height have complicate influences on the ease of blouses. Both sleeve cap height and the depth of arm hole have influences on the ease of sleeve. Consequently, in making clothes, it would be better to select and use proper patterns which go with the purposes and desings of clothes rather than to apply one pattern to various clothes.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.53-64
• /
• 2012

Deep and narrow welds can be produced by laser welding at high welding speeds with a narrow heat-affected zone (HAZ) and little distortion of the workpiece. This study aims to evaluate the usefulness of laser welding at automobile component manufacture. Microstructure observation, hardness test, tensile test and fatigue life test are performed by using the fiber laser welded SPFC590 steel sheets which is used widely in the manufacture of automotive seat frame. Three kinds of specimens are only a SPFC590 steel plate, quasi-butt joint plate and lap joint plate by laser welding. The following results that will be helpful to understand the static strength, fatigue crack initiation and growth mechanism were obtained. (1) The tensile strength of quasi butt joint specimens nearly equal to base metal specimens, but lap joint specimens fractured in shear area of weld metal. (2) The fatigue strength of quasi-butt joint specimen was approximately 8 percent lower than that of the base metal specimens. Furthermore, the lap joint specimens were less than 86 percent of the base metal specimens. (3) The lap joint fatigue specimens fractured at shear area in high level stress amplitude, while fractured at normal area in low level stress amplitude. From these results, the applicability of the laser welding to the automobile component is discussed.

• 한국지형학회지
• /
• 제15권2호
• /
• pp.95-109
• /
• 2008

경상우도 동천구곡은 속리산과 덕유산 일대의 골짜기에 주로 분포하며, 화강암 지형 경관이 주축을 이룬다. 특히 하천의 암반 하상에 넓게 펼쳐진 너럭바위가 그 대표적 지형 경관이라 할 수 있다. 반면에 경상좌도 동천구곡은 경북 일대 태백 산지의 골짜기에 주로 분포하며, 퇴적암 지형 경관이 주축을 이룬다. 경북 일대 태백 산지의 골짜기에는 낙동강이 흐르는데, 동천구곡은 주로 낙동강의 지류를 따라 분포한다. 낙동강의 지류들은 태백 산지 내에서 곡류 하도를 이루며, 이에 따라 공격면 상에는 수직 절벽이 발달하고 그 아래에는 소가 나타난다. 보호면에 해당하는 포인트바는 주로 자갈 중심의 사력퇴가 발달하여 여울을 이루고 있다. 따라서 경상우도 동천구곡은 수평적 경관미를 담고 있다면, 경상좌도 동천구곡은 수직적 경관미가 탁월하다고 할 수 있다. 선인들은 동천구곡의 지형경관을 절벽(絶壁), 봉(峯), 담(潭), 탄(灘),천사(川沙), 폭(瀑), 대(臺) 등으로 이름 지어 불렀다.

• 대한치과의사협회지
• /
• 제21권5호통권168호
• /
• pp.415-423
• /
• 1983

A total of 202 full coverage crowns from 31 patients was investigated to find out the relationships between crown contour and gingival response. Every experimental crown has its contralateral natural tooth for its control group. Gingival Index and buccolingual width of the crowns were measured on both experimental and control group. Following conclusions were obtained from the study. 1. Most of the crown restorations were overcontoured and the increments were servere at cervical and height of contour area. 2. Height of contour and contact point of the restored crown were located near cervical area. Besides, most crowns had narrow embrasure with wide contact area. 3. Gingival Index around crown restorations was significantly larger than that of control group. 4. the interrelationship between Gingival Index and restored material or restored period was not verified at 5% significant level. 5. When grouping the artificial crowns into overcontoured, normal contoured, and undercontoured group by their width increment, the gingival inflammation was the severest in the overcontoured group and the mildest in the undercontoured group.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.713-714
• /
• 2008

UHF RFID has the communication area within 10mm and It is a narrow system in order to cover HomeNetworking. 802.11n has the communication area between 100mm and 120mm. RFID is able to extend the communication area by using 802.11n technology. In this paper, presented HomeNetwork system using RFID and 802.11n.