• 한국재료학회지
• /
• 제18권5호
• /
• pp.253-258
• /
• 2008

A simple method to deposit carbon nanotube films uniformly on large area substrates using an arc discharge method is reported in this paper. The arc discharge method was modified to deposit carbon nanotube films in situ on the substrates. The substrates were scanned several times over the arcing point for a uniform film thickness. Deposition was carried out under variable dc bias conditions at 600 torr of $H_2$ gas. The thickness uniformity of the single-wall carbon nanotube films as characterized by a four-point probe was within 30% deviation. The morphology and crystal quality of the single-wall carbon nanotube film were also characterized by field emission scanning electron microscopy and Raman spectroscopy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.119-119
• /
• 2016

Over the last years the anodic formation of ordered $TiO_2$ nanotube layers has created significant scientific interest. Titanium oxide nanotube formation on the titanium or titanium alloy surface is expected to be important to improve cell adhesion and proliferation under clinical conditions. It should be possible to control the nanotube size and morphology for biomedical implant use by controlling the applied voltage, alloying element, current density, anodization time, and electrolyte. $TiO_2$ nanotubes show excellent biocompatibility, and the open volume in the tubes may be exploited as a drug release platform and so on. Therefore, in this study, Nanotube shape on the Ti-29Nb-xHf alloys with applied potentials was reserched. $TiO_2$ nanotube formation on Ti-29Nb-xHf alloys was carried out using anodization technique as a function of applied DC potential (10 V to 30 V and 30 V to 10 V) and anodization time for 60~120 min in $1MH_3PO_4$ with small additions of (0.8 wt. %, to 1.2 wt. %) NaF. The morphology change of anodized Ti-29Nb-xHf alloys was determined by FE-SEM, XRD, and EDS.

• Carbon letters
• /
• 제15권4호
• /
• pp.255-261
• /
• 2014

Multi-walled carbon nanotube reinforced epoxy composites were fabricated using shear mixing and sonication. The mechanical, viscoelastic, thermal, and electrical properties of the fabricated specimens were measured and evaluated. From the images and the results of the measurements of tensile strengths, the specimens having 0.6 wt% nanotube content showed better dispersion and higher strength than those of the other specimens. The Young's moduli of the specimens increased as the nanotube filler content was increased in the matrix. As the concentrations of nanotubes filler were increased in the composite specimens, their storage and loss moduli also tended to increase. The specimen having a nanotube filler content of 0.6 wt% showed higher thermal conductivity than that of the other specimens. On the other hand, in the measurement of thermal expansion, specimens having 0.4 and 0.6 wt% filler contents showed a lower value than that of the other specimens. The electrical conductivities also increased with increasing content of nanotube filler. Based on the measured and evaluated properties of the composites, it is believed that the simple and efficient fabrication process used in this study was sufficient to obtain improved properties in the specimens.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.57-66
• /
• 2017

Nanocomposites reinforced with carbon nanotube fibers exhibit greater stiffness, strength and damping properties in comparison to conventional composites reinforced with carbon/glass fibers. Consequently, most of the nanocomposite research is focused in understanding the dynamic characteristics, which are highly useful in applications such as vibration control and energy harvesting. It has been observed that those nanocomposites show better stiffness when the geometry of nanotubes is straight as compared to curvilinear although nanotube agglomeration may exist. In this work the damping behavior of the nanocomposite is characterized in terms of loss factor under the presence of nanotube agglomerations. A micro stick-slip damping model is used to compute the damping properties of the nanocomposites with multiwall carbon nanotubes. The present formulation considers the slippage between the interface of the matrix and the nanotubes as well as the slippage between the interlayers in the nanotubes. The nanotube agglomerations model is also presented. Results are computed based on the loss factor expressed in terms of strain amplitude and nanotube agglomerations. The results show that although-among the various factors such as the material properties (moduli of nanotubes and polymer matrix) and the geometric properties (number of nanotubes, volume fraction of nanotubes, and critical interfacial shear stresses), the agglomeration of nanotubes significantly influences the damping properties of the nanocomposites. Therefore the full potential of nanocomposites to be used for damping applications needs to be analyzed under the influence of nanotube agglomerations.

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.1-4
• /
• 2007

Carbon nanotube oscillators encapsulating copper nanowire were investigated by molecular dynamics simulations. The excess forces due to the carbon-carbon van der Waals interactions are higher than the excess force due to carbon-copper interactions. And the masses of copper atoms are higher than those of carbon atoms. So, the carbon atoms are easier accelerated than the copper atoms. When the encapsulated copper nanowire deforms the encapsulating nanotube, the frequency can not be estimated by the mass-frequency dependence in classical oscillation theory.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.21-24
• /
• 2009

We investigated a nanoscale inertia sensor based on telescoping carbon nanotubes, using classical molecular dynamics simulations. The position of the telescoping nanotubes is controlled by the centrifugal force exerted by the rotation platform, thus, position shifts are determined by the capacitance between carbon nanotubes and the electrode, and the operating frequency of the carbon nanotube oscillator. This measurement system, tracking oscillations of the carbon nanotube oscillator, can be used as the sensor for numerous types of devices, such as motion detectors, accelerometers and acoustic sensors.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.541-544
• /
• 2009

In Part III, the paper will show that an alumina-carbon nanotube-niobium nanocomposite produced fracture toughness values that are several times higher than that of pure nanocrystalline alumina. It was possible to take advantage of both fiber-toughening and ductile-metal toughening in this investigation.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.105-108
• /
• 2006

We investigated the fluidic gas-driven carbon-nanotube motor based on multi-wall carbon nanotubes and fluidic gas flow. Since the origination of the torque was the friction between the carbon nanotube surface and the fluidic gases, the density and the flow rate of the working gas or liquid were very important for the carbon nanotube motor. Molecular simulation results showed that multi-wall carbon nanotubes with very low rotating energy barriers could be effectively used for fluidic gas-driven carbon-nanotube motors.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.27-30
• /
• 2007

The gigahertz oscillator behavior of double-walled boron-nitride nanotube (BNNT) was investigated by using classical molecular dynamics simulations. The BNNT oscillator characteristics were compared to carbon-nanotube (CNT) and hybrid-C@BNNT oscillators. The results show that the BNNT oscillators are higher than the van der Waals force of the CNT oscillator. Since the frictional effects of BNNT oscillators are higher than that of a CNT oscillator, the damping factors of BNNT and hybrid oscillators are higher than that of a CNT oscillator.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.467-474
• /
• 2020

탄소나노튜브는 뛰어난 역학적 성능 및 기능성으로 다양한 분야에서 활용되고 있는 나노소재이다. 탄소나노튜브를 건설재료 분야에 활용하는 연구는 현재의 화두 중 하나로, 예전에 비해 점차 많은 연구가 진행되고 있으나, 탄소나노튜브의 혼입률이 시멘트 페이스트의 압축강도 및 유변학적 물성에 미치는 영향을 검증한 문헌은 상대적으로 부족한 것으로 나타났다. 본 연구에서는 Polyvinyl Pyrrolidone을 사용하여 수용액 분산된 다중벽 탄소나노튜브를 이용하여 시멘트 페이스트를 제조하고, 이의 유변학적 물성 및 압축강도 특성을 확인하고자 하였다. 본 연구의 결과에 따르면, 탄소나노튜브의 혼입률이 증가할수록 소성점도 및 소성항복응력의 증가가 발생하였으며, 물시멘트비가 낮은 경우에 이러한 경향이 더욱 뚜렷하게 드러나는 것이 확인되었다. 탄소나노튜브 혼입 시멘트 페이스트의 압축강도는 물시멘트비가 0.30인 경우 탄소나노튜브 혼입률 0.1wt%에서, 물시멘트비가 0.40인 경우에는 혼입률 0.2wt%에서 최대가 되는 것으로 나타났다.