• 제목/요약/키워드: Nanocrystalline Fe

검색결과 209건 처리시간 0.025초

전착법에 의한 Fe-45 wt%Ni-P 합금의 조직과 자기적 성질에 관한 연구 (A Study of Structures and Magnetic Properties of Electrodeposited Fe-45 wt%Ni-P Alloys)

  • 구승현;이흥렬;김동환;황태진;임태홍
    • 한국표면공학회지
    • /
    • 제36권6호
    • /
    • pp.461-465
    • /
    • 2003
  • The microstructures and magnetic properties of electrodeposited Fe-45 wt%Ni-P alloys have been investigated. The structures of electrodeposited Fe-45 wt%Ni alloy was FCC i.e. ${\gamma}$ phase and the size of crystallite was 10 nm. The structure of electrodeposited Fe-45 wt%Ni-1 wt%P alloy showed ${\gamma}$ phase and 7 nm sized nanocrystalline. The electrodeposited Fe-45 wt%Ni-P alloys containing 2∼3 wt% of P exhibited ${\gamma}$$\alpha$ dual phases. The electrodeposited Fe-45 wt%Ni-P alloys above 3.5 wt% showed an amorphous structure. P in the alloys acted grain refining and phase changing element. The resistivity of the electrodeposited alloys increased with P contents. Effective permeability at high frequency (above 1 MHz) increased with P contents up to 2 wt% and this was ascribed to the easier magnetization rotation owing to the reduction of eddy current. Effective permeability decreased with P contents above 3 wt% and this was ascribed to the transformation of the ferromagnetism of Fe-45 wt%Ni alloy gradually into paramagnetism with the introduction of P into the electrodeposited alloy matrix.

미결정 FeZrN 박막의 자기특성 및 내식성에 미치는 Cr 첨가 효과 (Effects of Cr Addition on the Magnetic Properties and Corrosion Resistance of Nanocrystalline FeZrN Thin Films)

  • 김태영;강남석;송기창;조삼제;안동훈
    • 한국자기학회지
    • /
    • 제4권2호
    • /
    • pp.135-141
    • /
    • 1994
  • 스퍼터방식으로 제조한 FeZrCrN 미결정박막의 질소 유입량의 변화와 Cr 첨가량 변화에 따라 연자기특성과 내반응성 및 내식성을 조사하였다. 질소 유립량 증가에 따라 포화자속밀도는 감소하고 적 절한량(질소 유입량 3%)의 질소가 유입 되었을 때 열처리후에도 이방성 분산 감소효과 등에 의하여 우수 한 연자기특성이 출현 하였으며, 이때 보자력은 0.4 Oe, 투자율은 5 MHz에서 2600 정도를 나타내었다. FeZrN 박막에 Cr을 7.5 at.% 정도 첨가하였을때 포화자속밀도는 12.5kg까지 감소하였지만 양호한 연자기 특성이 그대로 유지되었고 Cr 첨가에 의해 현저한 내식성의 향상과 집합 glass와의 내반응성의 개선이 있었다.

  • PDF

Fe계 나노결정립 분말과 페라이트 복합체의 전자파 흡수특성 (Electromagnetic Wave Absorption Behavior of a Fe-based Nanocrystalline Alloy mixed with a Ferrite Powder)

  • 구숙경;이민혁;문병기;송용설;손근용;박원욱
    • 한국분말재료학회지
    • /
    • 제15권4호
    • /
    • pp.292-296
    • /
    • 2008
  • The electromagnetic (EM) wave absorption properties of the $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline powder mixed with 5 to 20 vol% of Ni-Zn ferrites has been investigated in a frequency range from 100MHz to 10GHz. Amorphous ribbons prepared by a planar flow casting process were pulverized and milled after annealing at 425 for 1 hour. The powder was mixed with a ferrite powder at various volume ratios to tape-cast into a 1.0mm thick sheet. Results showed that the EM wave absorption sheet with Ni-Zn ferrite powder reduced complex permittivity due to low dielectric constant of ferrite compared with nanocrystalline powder, while that with 5 vol% of ferrite showed relatively higher imaginary part of permeability. The sheet mixed with 5 vol% ferrite powder showed the best electromagnetic wave absorption properties at high frequency ranges, which resulted from the increased imaginary part of permeability due to reduced eddy current.

나노크기 매킨나와이트로 코팅된 알루미나에 의한 아비산염의 제거 (Removal of Arsenite by Nanocrystalline Mackinawite(FeS)-Coated Alumina)

  • 이승열;강정천;박민지;양경희;정훈영
    • 한국광물학회지
    • /
    • 제26권2호
    • /
    • pp.101-110
    • /
    • 2013
  • 나노크기 매킨나와이트(nanocrystalline mackinawite, FeS)는 높은 비표면적을 지닌 반응성 높은 광물로, 오염된 지하수나 토양의 복원을 위해 널리 사용된다. 또한 매킨나와이트는 혐기성 부식반응에 대해 열역학적으로 안정하고, 황산염 환원미생물의 대사에 의해 재생된다는 장점이 있다. 하지만 매킨나와이트 나노입자는 지하수 흐름에 의해 멀리 확산되거나 입자집적이 일어나 대수층 공극을 막는다. 따라서 현장복원을 위한 투과반응벽(permeable reactive barrier)의 설치를 위해서 나노크기 매킨나와이트에 대한 변형이 필요하다. 이를 위해 본 연구에서는 코팅법을 활용해 매킨나와이트 나노입자를 알루미나(alumina, $Al_2O_3$) 및 활성알루미나(activated alumina) 표면에 증착시켰다. 매킨나와이트의 코팅량은 pH에 따라 현저히 달랐으며, 두 종의 알루미나 모두 약 pH 6.9에서 최대 코팅이 관찰되었다. 이 pH에서 알루미나와 매킨나와이트는 반대의 표면전하(surface charge)를 띠어 두 광물 간 정전기적 인력이 발생하고, 이로 인해 효율적인 코팅이 일어났다. 이 pH에서 알루미나 및 활성 알루미나에 의한 코팅량은 각각 0.038 $mmol{\cdot}FeS/g$과 0.114 $mmol{\cdot}FeS/g$이었다. 혐기성 조건에서 코팅되지 않은 알루미나 및 활성 알루미나, 그리고 최적 pH에서 코팅된 알루미나 및 활성 알루미나를 사용해 아비산염(arsenite) 흡착실험을 수행했다. 코팅되지 않은 활성 알루미나는 코팅되지 않은 알루미나와 비교해 단위질량당 높은 아비산염의 제거를 보여주었으나, 매킨나와이트의 코팅에 의한 흡착량 증가를 보이지 않았다. 활성 알루미나는 높은 비표면적을 지니고 있어 반응성 높은 수산화작용기(hydroxyl functional group)가 다수 존재했고, 이로 인해 코팅된 매킨나와이트에 의한 아비산염의 제거가 중요하지 않았다. 반면 알루미나는 매킨나와이트 코팅에 의해 향상된 아비산염의 제거율을 보였는데, 이것은 알루미나에 존재한 수산화작용기가 아비산염과의 표면배위결합(surface complexation)에 소모되고, 코팅된 매킨나와이트에 의한 부가적인 흡착이 일어났기 때문이다. 코팅된 알루미나는 이전에 연구된 코팅된 실리카와 비교해보면 단위 비표면적당 매킨나와이트의 코팅량이 약 8배 높았으며, 더 높은 아비산염에 대한 흡착력을 보였다. 따라서 본 연구의 결과는 코팅된 알루미나는 투과반응벽의 설치에 적합한 물질이고, 특히 아비산염으로 오염된 지하수의 정화에 유용하게 적용될 수 있음을 지시하고 있다.