• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.339-346
• /
• 2003

Molecular dynamic simulations of nano indentation on single-crystal silicon (100) surface were performed using diamond indentor. Silicon substrate and diamond indentor were modeled diamond structure with Tersoff potential model. Phase transformation of silicon, incipient plastic deformation, change of incident temperature distribution are investigated through the change of potential energy distribution, displacement-load diagram, the change of kinetic energy distribution and displacements of silicon atoms. Phase transformation is highly localized and consists of a high-density region surrounding the tip. Axial load linearly increased according to the indenting depth. Number of atoms with high kinetic energy increased at the interface between substrate and indentor tip.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.95.1-95.1
• /
• 2017

In this study, it has been tried to make the single Mo-Cu alloying targets with the Cu showing the best surface hardness that was determined by investigation on the coatings with the double target process. The single alloying targets were prepared by powder metallurgy methods such as mechanical alloying and spark plasma sintering. The nanocomposite coatings were prepared by reactive magnetron sputtering process with the single alloying targets in $Ar+N_2$ atmosphere. The microstructure changes of the Mo-Cu-N coatings with diverse Cu contents were investigated by using XRD, SEM and EDS. The mechanical properties of the coatings were evaluated by using nano-indentor, scratch test, and ball on disc methods. Especially, the coated samples were tested by using various lubricating oil to compare the property of anti wear-resistance. In this study, the nano-composite MoN-Cu coatings prepared using an alloying target was eventually compared with the coatings from the multiple targets.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.91-99
• /
• 2007

Fractures of galvannealed coating layer during actual press forming in automotive applications were observed by scanning electron microscopy in order to understand fracture mechanism. Fracture behaviors of galvannealed coating layer in extra deep drawing quality steels and high strength steels have been studied by performing the tests describing the representative plastic deformation in sheet metal forming such as uni-axial tensile test, compression test, bi-axial test and plane strain test. Growth and direction of cracks were deeply related to the plastic deformation modes and history. The material properties of galvannealed coating layer were investigated by nano-indentation test equipped with Berkovich diamond indentor for the specimens. Hardness and elastic modulus of the coating layer were higher than bared steels and that was the reason for crack of coating layer. Flat friction test and drawbead friction test were performed to observe the effect of the surface morphology on the frictional characteristics. The micro-plasto hydrodynamic lubrication were appeared and played an important role in reducing the coefficient of friction.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.666-666
• /
• 2013

CIGS solar cell에서 p-type semiconductor역할을 수행하는 Cu(In,Ga)Se로 이루어진 Absorber layer는 4 element multi binary compound로 stoichiometry 측면에서 다양한 형태가 나타나기 때문에 태양전지 효율을 향상시키기 위해 이에 대한 연구가 활발하다. 우리는 E-beam evaporation 방법으로 다양한 조건의 multi layer로 증착된 CIG layer 위에 일정 두께의 Se을 증착하면서 열처리 조건에 따른 Selenization 메커니즘에 대한 연구를 수행하였다. 결과분석을 위해(in-situ High Temperature) XRD, XPS, Micro Raman spectroscopy, FE-SEM, (Nano Indentor, Atomic Force Microscopy) 등을 이용하여 결정구조, 결정화도, Depth profile, Eg (band gap energy) 등을 알아보고 분석결과간의 상관관계를 고찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.134-135
• /
• 2007

Growth of cubic SiC has been carried out on oxided Si substrate using atmospheric pressure chemical vapor deposition (APCVD). Hexamethyldisilane (HMDS) was used as the single precursor and nonflammable mixture of Ar and $H_2$ was used as carrier gas. Epitaxial growth had performed depositions under the various $H_2$ conditions which were adjusted from 0 to 100 seem. The effects of $H_2$ was characterized by surface roughness, thickness uniformity, films quality and elastic modulus. Thickness uniformity and films quality were performed by SEM. Surface roughness and elastic modulus were investigated by AFM and Nano-indentor, respectively. According to the $H_2$ flow rate, Poly 3C-SiC thin film quality was improved not only physical but also mechanical properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1737-1739
• /
• 2004

Diamond-like carbon (DLC) films were prepared with RF-PECVD (Plasma Enhanced Chemical Vapor Deposition) method on coming glass and silicon substrates using methane ($CH_4$) and hydrogen ($H_2$) gases. We examined the effects of $CH_4$ to $H_2$ ratios on tribological and optical properties of the DLC films. The structure and surface morphology of the films were examined using Raman spectroscopy and atomic force microscopy (AFM). The hardness of the DLC film was measured with nano-indentor. The optical properties of DLC thin film were investigated by UV/VIS spectrometer and ellipsometry. And also, solar cells were fabricated using DLC as antireflection coating before and after coating DLC on silicon substrate and compared the efficiency.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.651-654
• /
• 2010

This paper describes the thermal and mechanical properties of doped thin film 3C-SiC and porous 3C-SiC. In this work, the in-situ doped thin film 3C-SiC was deposited by using atmospheric pressure chemical vapor deposition (APCVD) method at $120^{\circ}C$ using single-precursor hexamethyildisilane: $Si_2(CH_3)_6$ (HMDS) as Si and C precursors. 0~40 sccm $N_2$ gas was used as doping source. After growing of doped thin film 3C-SiC, porous structure was achieved by anodization process with 380 nm UV-LED. Anodization time and current density were fixed at 60 sec and 7.1 mA/$cm^2$, respectively. The thermal and mechanical properties of the $N_2$ doped porous 3C-SiC was measured by temperature coefficient of resistance (TCR) and nano-indentation, respectively. In the case of 0 sccm, the variations of TCR of thin film and porous 3C-SiC are similar, but TCR conversely changed with increase of $N_2$ flow rate. Maximum young's modulus and hardness of porous 3C-SiC films were measured to be 276 GPa and 32 Gpa at 0 sccm $N_2$, respectively.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.63-67
• /
• 2008

전자산업의 소형화와 경량화 추세에 맞추어 최근 집적 칩(IC)이나 패키지를 적층시키는 삼차원 집적화(3D integration) 기술 개발은 차세대 핵심기술로 중요시되고 있다. 본 연구에서는 삼차원 집적화 공정 기술 중 하나인 초박막 실리콘 웨이퍼 연삭(grinding)공정이 웨이퍼 표면에 미치는 영향에 대해서 조사하였다. 실리콘 웨이퍼를 약 $30{\mu}m$과 $50{\mu}m$ 두께까지 연삭한 후, 미세연삭(fine grinding) 단계까지 처리된 시편을 건식 연마(dry polishing) 또는 습식 애칭(wet etching)으로 표면 처리된 시편들과 비교 분석하였다. 박막 웨이퍼 두께는 전계방시형 주사전자현미경과 적외선 분광기로 측정하였고, 표면 특성 분석을 위해선 표면주도(roughness), 표면손상(damage), 경도를 원자현미경, 투과정자현미경 그리고 나노인덴터(nano-indentor)를 이용하여 측정하였다. 표면 처리된 시편의 특성이 표면 처리되지 않은 시편보다 표면주도와 표면손상 등에서 현저히 우수함을 확인 할 수 있었으나, 경도의 경우 표면 처리의 유무에 관계없이 기존의 벌크(bulk)실리콘 웨이퍼와 오차범위 내에서 동일한 것으로 보였다.

• 한국진공학회지
• /
• 제8권1호
• /
• pp.43-50
• /
• 1999

이온빔보조증착법으로 h-BN을 증착하여 이온에너지 및 기판온도에 따른 hexagonal ring의 배열 및 결정성의 변화를 연구하였다. 보론은 전자빔으로 1.5 $\AA$/sec 의 속도로 증발시켰으며, 질소는 둥-hall 형 이온건으로 60, 80, 100eV의 에너지로 공급하였다. 기판의 온도는 상온(no heating), 200, 400, 500, $800^{\circ}C$로 변화시켰다. 질소이온에너지가 증가할수록 hexagonal ring의 c축은 기판에 평행하게 배열하여 100 eV의 질소이온에너지에서 가장 좋은 배열을 나타내었다. 이는 이온에너지가 높을수록 합성 막에 큰 압축응력이 발생하기 때문으로 생각된다. 기판온도에 따라서는 온도가 증가함에 따라 배열이 증가하다가 약 $400^{\circ}C$에서 최대가 되고 그 보다 높은 온도에서는 배열이 감소하였다. 그리고 결정도는 온도가 증가할수록 향상되었다. 이러한 경향들은 온도가 증가함에 따라 원자 이동도는 증가하고 응력발생은 어려워지는 경향으로부터 잘 설명된다. 또한 nano-indentor로 측정한 h-BN막의 경도는 c-축의 배열정도와 같은 경향을 보였다. 이온빔보조증착법은 hexagonal ring의 배열을 통해 h-BN막 성질의 최적화에 효과적인 방법으로 판단된다.

• 한국재료학회지
• /
• 제16권4호
• /
• pp.218-224
• /
• 2006

RF sputtering process was applied to produce thin hydroxyapatite(HAp) films on Ti-6Al-4V alloy substrates. The effects of different heat treatment conditions on the hardness between HAp thin films and Ti-6Al-4V alloy substrates were studied. Before deposition, the Ti-6Al-4V alloy substrates were heat treated for 1h at $850^{\circ}C\;under\;3.0{\times}10^{-3}torr$, and after deposition, the HAp thin films were heat treated for 1h at $400^{\circ}C,\;600^{\circ}C\;and\;800^{\circ}C$ under the atmosphere, and analyzed FESEM-EDX, FTIR, XRD, nano-indentor, micro-vickers hardness, respectively. Experimental results represented that the surface defects of thin films decreased by relaxation of internal stress and control of substrate structure followed by heat treatment of substrates before the deposition, and the HAp thin films on the heat-treated substrates had higher hardness than none heattreated substrates before the deposition, and the hardness properties of HAp thin films and Ti-6Al-4V alloy substrates appeared independent behavior, and the hardness of HAp thin films decreased by formation of $VTiO_3(OH),\;{\theta}-Al_{0.32}V_2O_5,\;Al_{0.33}V_2O_5$.