• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.190-190
• /
• 2012

전북대학교 고온 플라즈마 응용 연구 센터는 교육과학기술부 기초연구사업 중 고가연구장비 구축사업의 일환으로 소재공정용 다목적 100 kW 플라즈마 발생장치를 구축하고 있다. 100kW급 ICP (RF)형 플라즈마 발생장치는 RF 전력 인출이 이중으로 되어있어 한쪽에서는 수~수십 um 크기의 금속, 세라믹 등 고융점 원료분말을 순간적으로 용해, 기화 및 분해시키고 이들 기화 또는 분해된 증기를 급랭시키는 과정에서 초미분(<1 um)을 합성하는 플라즈마 합성법 연구가 가능하도록 RF 플라즈마 분말 합성 시스템이 연결되어 있고 다른 한쪽으로는 진공 챔버 내에서 고온 고속의 RF 플라즈마 불꽃을 형성 한 후 RF 플라즈마의 축 방향으로 반응성 가스 및 코팅 대상 물질을 주입하여 코팅 할 수 있는 열플라즈마 용사코팅 시스템이 연결되어 있는 다목적 연구 장치이다. 본 장치는 100 kW급 RF 전원 공급기와 유도결합형 플라즈마 토치, 플라즈마 분말 합성 부, 플라즈마 코팅 및 반응성 증착부, 가스 공급부, 냉각수 공급부, 전기 계장/제어부로 구성되어 있다.

• Journal of Powder Materials
• /
• v.14 no.2 s.61
• /
• pp.145-149
• /
• 2007

Nanocrystalline transient aluminas (${\gamma}$-alumina) were coated on core particles (${\gamma}$-alumina) by a carbonate precipitation and thermal-assisted combustion, which is environmentally friend. The ammonium aluminum carbonate hydroxide (AACH) as a precursor for coating of transient aluminas was produced from precipitation reaction of ammonium aluminum sulfate and ammonium hydrogen carbonate. The crystalline size and morphology of the synthetic, AACH, were greatly dependent on pH and temperature. AACH with a size of 5 nm was coated on the core alumina particle at pH 9. whereas rod shape and large agglomerates were coated at pH 8 and 11, respectively. The AACH was tightly bonded coated on the core particle due to formation of surface complexes by the adsorption of carbonates, hydroxyl and ammonia groups on the surface of the core alumina powder. The synthetic precursor successfully converted to amorphous- and ${\gamma}$-alumina phase at low temperature through decomposition of surface complexes and thermal-assisted phase transformation.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.648-652
• /
• 2006

Demand for $MnO_{2}$ has been increased with interest for its various applications in the fields of battery, catalyst, and capacitor. In this study, $MnO_{2}$ hollow microspheres were synthesized by sacrificial core method. $MnO_{2}$ nano particles were produced by the hydrolysis and condensation of manganese acetate. The stable $MnO_{2}$ hollow microspheres can very well be synthesized with mixing 0.2% of water, 0.65 mM of manganese acetate, and 0.02 mM catalyst at a room temperature.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.472-476
• /
• 2016

The nano-array of the vertically aligned rod-like particles grown on ZnO coated glass-substrates was obtained via hydrothermal process. ZnO thin film coatings were prepared on the glass substrates using a MOD (metallorganic deposition) dip-coating method with zinc chloride dihydrate as starting material and 2-ethylhexanol as solvent. ZnO nanorods were synthesized on the seeded substrates by hydrothermal method at $80^{\circ}C$ using zinc-nitrate hexahydrate as a Zn source and sodium hydroxide as a mineralizer. Under the hydrothermal condition, the rod-like nanocrystals were easily attaching on the already ZnO seeded (coated) glass surface. It has been shown that the hydrothermal synthesis parameters are key factors in the nucleation and growth of ZnO crystallites. By controlling of hydrothermal parameters, the ZnO particulate morphology could be easily tailored. Rod-shaped ZnO arrays on the glass substrates consisted of elongated crystals having 6-fold symmetry were predominantly developed at high Zn precursor concentration in the pH range 7~11.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.185-189
• /
• 2005

We reported here nano-scale electrical phase-change recording in amorphous $Ge_2Sb_2Te_5$ media using an atomic force microscope (AFM) having conducting probes. In recording process, a pulse voltage is applied to the conductive probe that touches the media surface to change locally the electrical resistivity of a film. However, in contact operation, tip/media wear and contamination could major obstacles, which degraded SNR, reproducibility, and lifetime. In order to overcome tip/media wear and contamination in contact mode operation, we adopted the W incorporated diamond-like carbon (W-DLC) films as a protective layer. Optimized mutilayer media were prepared by a hybrid deposition system of PECVD and RF magnetron sputtering. When suitable electrical pulses were applied to media through the conducting probe, it was observed that data bits as small as 25 nm in diameter have been written and read with good reproducibility, which corresponds to a data density of $1 Tbit/inch^2$. We concluded that stable electrical phase-change recording was possible mainly due to W-DLC layer, which played a role not only capping layer but also resistive layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.47-50
• /
• 2002

ZnO nanowires were coated conformally with aluminum oxide ($Al_{2}O_{3}$) material by atomic layer deposition (ALD). The ZnO nanowires were first synthesized on a Si (100) substrate at $1380^{\circ}C$ from ball-milled ZnO powders by a thermal evaporation procedure with an argon carrier gas without any catalysts; the length and diameter of these ZnO nanowires are $20\sim30{\mu}m$ and $50{\sim}200$ nm, respectively. $Al_{2}O_{3}$ films were then deposited on these ZnO nanowires by ALD at a substrate temperature of $300^{\circ}C$ using trimethylaluminum (TMA) and distilled water ($H_{2}O$). Transmission electron microscopy (TEM) images of the deposited ZnO nanowires revealed that 40nm-thick $Al_{2}O_{3}$ cylindrical shells surround the ZnO nanowires.

• Journal of Powder Materials
• /
• v.17 no.3
• /
• pp.230-234
• /
• 2010

Homogenous silica-coated $CoFe_2O_4$ samples with controlled silica thickness were synthesized by the reverse microemulsion method. First, 7 nm size cobalt ferrite nanoparticles were prepared by thermal decomposition methods. Hydrophobic cobalt ferrites were coated with controlled $SiO_2$ using polyoxyethylene(5)nonylphenylether (Igepal) as a surfactant, $NH_4OH$ and tetraethyl orthosilicate (TEOS). The well controlled thickness of the silica shell was found to depend on the reaction time and the amount of surfactant used during production. Thick shell was prepared by increasing reaction time and small amount of surfactant.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.309-314
• /
• 2015

Multiwall carbon nanotubes are synthesized by using VLS mechanism for the application to $H_2$ gas sensor. MWCNT is not suitable for hydrogen gas sensor due to its low response to the gas. To enhance the gas sensing performance, multiwall carbon nanotubes are coated with $TiO_2$ nanoparticles. Scanning electron microscopy and Transmission electron microscopy showed that the synthesized MWCNT were well dispersed with the diameter and wall thickness of approximately 10-30nm and 5nm, respectively. The MWCNT sensor showed the sensitivities of 1.33-9.5% for the $H_2$ concentration of 100-5000ppm at room temperature. These sensitivities are significantly improved to 6.64-46.65% by coating $TiO_2$ nanoparticles to the MWCNT sensor. The mechanisms of $H_2$ gas sensing improvement of the MWCNT sensor coated with $TiO_2$ nanoparticles are discussed.

• Archives of Pharmacal Research
• /
• v.26 no.10
• /
• pp.874-879
• /
• 2003

The present study was carried out to examine the stability of microencapsulated ascorbic acid in simulated-gastric and intestinal situation in vitro and the effect of microencapsulated ascorbic acid on iron bioavailability. Coating materials used were polyglycerol monostearate (PGMS) and medium-chain triacylglycerol (MCT), and core materials were L-ascorbic acid and ferric ammonium sulfate. When ascorbic acid was microencapsulated by MCT, the release of ascorbic acid was 6.3％ at pH 5 and 1.32％ at pH 2 in simulated-gastric fluids during 60 min. When ascorbic acid was microencapsulated by PGMS, the more ascorbic acid was released in the range of 9.5 to 16.0％. Comparatively, ascorbic acid release increased significantly as 94.7％ and 83.8％ coated by MCT and PGMS, respectively, for 60 min incubation in simulated-intestinal fluid. In the subsequent study, we tested whether ascorbic acid enhanced the iron bioavailability or not. In results, serum iron content and transferring saturation increased dramatically when subjects consumed milks containing both encapsulated iron and encapsulated ascorbic acid, compared with those when consumed uncapsulated iron or encapsulated iron without ascorbic acid. Therefore, the present data indicated that microencapsulated ascorbic acid with both PGMS and MCT were effective means for fortifying ascorbic acid into milk and for enhancing the iron bioavailability.

• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1111-1118
• /
• 2007

A bismuth-coated carbon fiber microelectrode was prepared using cyclic voltammetry (CV). An analytical application was performed for the copper analysis with Square Wave Stripping Voltammetry (SWSV). Gallic acid n-propyl ester (PG) was used for the complex formation with a copper ion, and electrochemical measurements were performed with a pre-amplifier of a low-current module for nano am per detection. The effects of various parameters on the response were optimized. Analytical working ranges of $0.03-25.9\;{\mu}gl^{-1}$ and $0-25\'mgl^{-1}$ Cu(II) were obtained. The relative standard deviation at $13\;mgl^{-1}$ Cu was 0.9% (n = 12) in optimum conditions. The detection limit was found to have been $0.019\;{\mu}gl^{-1}$, with a 30-sec accumulation time. The developed methods were applied to a copper assay in water samples.