• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.63-67
• /
• 2015

본 연구에서는 대면적 나노 금속 격자형 편광 필름 제작에서 증착 두께에 따른 광 특성 연구를 수행하였다. 나노 금속 격자형 편광필름은 PET(Polyethylene phthalate)기판 위에 알루미늄 선 격자 구조로 구성된다. 본 연구에서는 대면적 편광필름 제작을 위한 증착공정을 통한 금속 격자 형성을 목표로 하였으며, 금속 격자형 편광 필름 제작에 있어 최적의 투과율과 소광비를 가지는 금속 박막 형성 조건을 도출하였다. 최적화 공정에 의해 나노 금속 격자형 편광필름은 140 nm 주기, 70 nm 선폭, 70 nm의 금속층 높이를 가지는 금속 격자 구조로 제작 되었다. 분석결과 600 nm 파장에서 80% 이상의 최고 투과율 및 $10^6$ 이상의 소광비를 가지는 나노 금속 격자 편광필름의 높은 광 특성을 확인하였다.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.17-30
• /
• 2011

The polarizer is an important optical element used in a variety of applications. Nano-wire grid polarizers in the form of sub-wavelength metallic gratings are an attractive alternative to conventional polarizers, because they provide high extinction ratio. This study has been carried out to fabrication of the 17inch area size nano-wire grid polarizer(NWGP) The master for NWGPs with a pitch of 200nm and the area size $730mm{\times}450mm$ were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the Roll to-Roll UV imprinting and was applied to flexible PET film. The results were a transmission of light (Tp) 46.7%, reflectance (Rs) 40.1% and Extinction ratio of above 16 for the visible light range.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.105-124
• /
• 2011

TFT-LCD consists of LCD panel on the top, circuit unit on the side and BLU on the bottom. The recent development issues of BLU-dependent TFT-LCD have been power consumption minimization, slimmerization and size maximization. As a result of this trend, LED is adopted as BLU instead of CCFL to increase brightness and to reduce thickness. In liquid crystal displays, the light efficiency is below 10% due to the loss of light in the path from a light source to an LCD panel and presence of absorptive polarizer. This low efficiency results in low brightness and high power consumption. One way to circumvent this situation is to use a reflective polarizer between backlight units and LCD panels. Since a nano-wire grid polarizer has been known as a reflective polarizer, an idea was proposed that it can be used for the enhancement of the brightness of LCD. The use of reflective polarizing film is increasing as edge type LED TV and 3D TV markets are growing. This study has been carried out to fabrication of the nano-wire grid polarizer(NWGP) and investigated the brightness enhancement of LCD through polarization recycling by placing a NWGP between an c and a backlight unit. NWGPs with a pitch of 200nm were fabricated using laser interference lithography and aluminum sputtering and wet etching. And The NWGP fabrication process was using by the UV imprinting and was applied to plastic PET film. In this case, the brightness of an LCD with NWGPs was 1.21 times higher than that without NWGPs due to polarization recycling.

• 마이크로전자및패키징학회지
• /
• 제21권2호
• /
• pp.85-89
• /
• 2014

본 연구에서는 자기 소프트 몰드를 이용하여 피치 143.59 nm의 고 성능 NWGP(Nano Wire Grid Polarizer) 필름의 새로운 제조 방법을 제안하였다. 제작된 편광필름은 $6cm{\times}6cm$의 PET기판위에 알루미늄 격자 구조를 가지고 있으며, 이는 TFT-LCD(Thin Flat Transistor Liquid Crystal Display)에 응용 가능할 것으로 보인다. 자기 소프트 몰드는 너비 70.39 nm의 규격으로 제작되었으며, 이를 이용하여 2단계의 복제과정을 거쳐 제작되어진다. 이를 통해 본 연구에서는 기판위에 75.68 nm 선폭과 64.76 nm의 높이 143.59 nm pitch를 가지는 격자구조의 NWGP 패턴을 제작하였다. 또한, 이는 800 nm 파장 영역 대에서 75%의 최대 투과율과 10%의 최소 투과율을 가지는 것을 확인하였다. 따라서, 본 공정을 통해 독창적인 저 비용의 나노패터닝 기술로 디스플레이 산업에서 적용되어 질 것으로 보여진다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.340-343
• /
• 2008

This work reports the simple fabrication of the single cell gap transflective liquid crystal display (LCD) using wire grid polarizer. The nano sized wire grid polarizer was patterned on common electrode itself, on the reflective part of FFS (Fringe field switching) mode whereas the common electrode was unpatterned at transmissive part. However, this structure didn't show single gamma curve, so we further improved the device by patterning the common electrode at transmissive part. As a result, V-T curve of proposed structure shows single gamma curve. Such a device structure is free from in-cell retarder, compensation film and reflector and furthermore it is very thin and easy to fabricate.

• Advances in nano research
• /
• 제13권2호
• /
• pp.199-206
• /
• 2022

We present the high-brightness large-area 10.1" in-cell polarizer display panel integrated with a wire grid polarizer (WGP) and metal reflector, from the initial design to final system development in a commercially feasible level. We have modeled and developed the WGP architecture integrated with the metal reflector in a single in-cell layer, to achieve excellent polarization efficiency as well as brightness enhancement through the light recycling effect. After the optimization of key experimental parameters via Taguchi method, the roll nanoimprint lithography employing a flexible large-area tiled mold has been utilized to create the 90 nm-pitch polymer resist pattern with the 54.1 nm linewidth and 5.1 nm residual layer thickness. The 90 nm-pitch Al gratings with the 51.4 nm linewidth and 2150 Å height have been successfully fabricated after subsequent etch process, providing the in-cell WGPs with high optical performance in the entire visible light regime. Finally we have integrated the WGP in a commercial 10.1" display device and demonstrated its actual operation, exhibiting 1.24 times enhancement of brightness compared to a conventional film polarizer-based one, with the contrast ratio of 1,004:1. Polarization efficiency and transmittance of the developed WGPs in an in-cell polarizer panel achieve 99.995 % and 42.3 %, respectively.