• Korean Journal of Organic Agriculture
• /
• v.19 no.3
• /
• pp.405-416
• /
• 2011

Organic materials, such as chitin incubated solution (CIS) combined with neem oil (NO), nano silver silica (NSS), and Bordeaux mixture (BDM), were applied with and without agricultural chemicals (AC) (insecticide and fungicide) to investigate scab and mealybug occurrences and fruit qualities on 'Niitaka' pear trees in orchards in 2006. Fruits and leaves grown under CIS+NO without AC had less than 30%, scab occurrence, but CIS+NSS or CIS+BDM without AC had higher scab occurrence. Organic materials with AC decreased the scab to less than 20%. All treatments decreased mealybug occurrences to less than 10%, except for the fruits grown under CIS+BDM without AC. Fruit qualities varied among the treatments. Hunter value a, representing for the redness degree, was higher for fruits treated with CIS+NSS and CIS+BDM without AC than those with AC. Fruits treated with organic materials without AC had greater total phenolic and flavonoid compounds as well as antioxidant capacity in flesh and greater total phenolc compounds and antioxidant capacity in peel than those treated with the AC.

• Journal of Adhesion and Interface
• /
• v.25 no.2
• /
• pp.63-68
• /
• 2024

In this study, the contamination of gold(Au) wire according to the types of rinse applied for surface treatment in the wire bonding process is investigated and confirmed. For the surface treatment, rinses containing silicon(Si) or those based on organic materials are mainly employed. To identify their effects, surface treatment is conducted on Au wire using two types of rinse at a 1.0 wt% concentration, referred to as Si-including and Oil-based rinse-coated Au wire. Subsequently, a simulation experiment is performed to verify the reactivity of dust containing Si components that could occur in the semiconductor process. Through optical microscopy (OM) and scanning electron microscopy(SEM) analysis, it is observed that a larger amount of dust is adsorbed on the surface of Si-including rinse-coated Au wire compared with the Oil-based rinse-coated Au wire. This is attributed that the rinse containing Si components is relatively polar, causing polar interactions with dust, which also has polarity. Therefore, it is expected that using a rinse without Si components can reduce contamination caused by dust, thereby decreasing the defect rate in the practical wire bonding process.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.207-210
• /
• 2012

The preparation of $Sm_2O_3$ doped $CeO_2$ in Igepal CO-520/cyclohexane reverse micelle solutions has been studied. In the present work, we synthesized nanosized $Sm_2O_3$ doped $CeO_2$ powders by reverse micelle process using aqueous ammonia as the precipitant; hydroxide precursor was obtained from nitrate solutions dispersed in the nanosized aqueous domains of a micro emulsion consisting of cyclohexane as the oil phase, and poly (xoyethylene) nonylphenylether (Igepal CO-520) as the non-ionic surfactant. The synthesized and calcined powders were characterized by Thermogravimetry-differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), and Transmission electron microscopy (TEM). The crystallite size was found to increase with increase in water to surfactant (R) molar ratio. Average particle size and distribution of the synthesized $Sm_2O_3$ doped $CeO_2$ were below 10 nm and narrow, respectively. TG-DTA analysis shows that phase of $Sm_2O_3$ doped $CeO_2$ nanoparticles changed from monoclinic to tetragonal at approximately $560^{\circ}C$. The phase of the synthesized $Sm_2O_3$ doped $CeO_2$ with heating to $600^{\circ}C$ for 30 min was tetragonal $CeO_2$. This study revealed that the particle formation process in reverse micelles is based on a two step model. The rapid first step is the complete reduction of the metal to the zero valence state. The second step is growth, via reagent exchanges between micelles through the inter-micellar exchange.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.4
• /
• pp.257-265
• /
• 2009

Phosphatidylcholine was used to encapsulate aqueous extracts of Centella asiatica, and its biological activity was compared with another aqueous extracts. Nanoparticle of C. asiatica was made by encapsulation to w/o type spherical liposome which of aqueous extracts seized with oil phase as 78.2 nm average diameter. Cytotoxicity of the nanoparticle was measured on human skin fibroblast cells, CCD-986sk, and showed lower cytotoxicity on 1.0 mg/$m{\ell}$ of highest concentration as 28% than that of another extracts. The nanoparticle showed the highest promotion of human B and T cell growth up to 138% and 135%, respectively, compared to the control. and the NK cell growth was promoted up to 8% higher than the control in proportion to secretion of IL-6 and TNF-$\alpha$ from immune cell growth. Also nanoparticle showed highest inhibition activity of hyaluronidase on 1.0 mg/$m{\ell}$ of highest concentration as 60.5%. It seems that because of enhanced biological application of aqueous extracts on cell through nano-encapsulation process.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.6
• /
• pp.694-700
• /
• 2007

It is a gel type high functional toothpaste containing vitamin C, E, propolis extract and the rest of herb with a nanoemulsion state. Vitamin C, E is known as the material with an eminent anti-oxidation effect. Propolis is known as the material with an antimicrobial and anti-inflammatory effect. We have been succeeding in making nanoemulsion of vitamin C, E and propolis through the high pressure homogenizer using stable oil and lecithin and the gel type high functional tooth paste were made from nanoemulsion of vitamin C, E and propolis. We observed the process of wound protecting effect and cure effect for a wound of soft tissue, gingival tissue and mucous membrane showing ulcer and inflammation in oral cavity after applying a gel type high functional toothpaste to patient. As a result, the wound were healed very fast and any side effects were not shown. We confirmed that a gel type high functional toothpaste with nanoemulsion of vitamin C, E and propolis extract has good effect not only for wound healing but also for treatment of ulcer-like lesion in oral cavity. So we report our cases with review of literatures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.51-56
• /
• 2015

The object of this study is to obtain the optimum mix proportion of halogen free compound with flame resistance and, for the purpose, thermal/electrical characteristics test are conducted using compatibilizing agents, flame resistance agents, hydroxide aluminum, sunscreen, antioxidant and silicon oil on the base resin of linear low density polyethylene (LLDPE), Ethylene vinyl acetate copolymer (EVA). Existing compound method accompanies many requirements to be satisfied including a lot of addition of flame resistance agents, prohibition of impact on mixing capability with base and property and etc. In this study, different from the existing method, the optimum mix proportion is determined and experimented by adding nano clay. Oxygen index test shows no difference between specimens while T-6, T-9 shows oxygen index of 29[%] and 26[%], respectively. This is concluded that hydroxide aluminum, which is a flame resistance agent, leads low oxygen index. From UL94-V vertical flame resistance test, the combustion behavior is determined as V-0, Fail based on UL94-V decision criteria. Viscometry shows low measurements in specimens with separate addition of compatibilizing agents or nano clay. Volume resistivity test shows low measurement mainly in specimens without compatibilizing agents. Therefore, with the flame resistance compound shows better performance for thermal/electrical property and the optimum mix proportion are achieved among many existing materials.

• Korean Journal of Materials Research
• /
• v.23 no.1
• /
• pp.31-34
• /
• 2013

Trivalent cerium-ion-doped $Y_3(Al,\;Ga)_5O_{12}$ nanoparticle phosphor nanoparticles were synthesized using the reverse micelle process. The Ce doped $Y_3(Al,\;Ga)_5O_{12}$ particles were obtained from nitrate solutions dispersed in the nanosized aqueous domains of a micro emulsion consisting of cyclohexane as the oil phase and poly(oxyethylene) nonylphenyl ether (Igepal CO-520) as the non-ionic surfactant. The crystallinity, morphology, and thermal properties of the synthesized $Y_3(Al,\;Ga)_5O_{12}:Ce^{3+}$ powders were characterized by thermogravimetry-differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and transmission electron microscopy. The crystallinity, morphology, and chemical states of the ions were characterized; the photo-physical properties were studied by taking absorption, excitation, and emission spectra for various concentrations of cerium. The photo physical properties of the synthesized $Y_3(Al,\;Ga)_5O_{12}:Ce^{3+}$ powders were studied by taking the excitation and emission spectra for various concentrations of cerium. The average particle size of the synthesized YAG powders was below $1{\mu}m$. Excitation spectra of the $Y_3Al_5O_{12}$ and $Y_3Al_{3.97}Ga_{1.03}O_{12}$ samples were 485 nm and 475 nm, respectively. The emission spectra of the $Y_3Al_5O_{12}$ and $Y_3Al_{3.97}Ga_{1.03}O_{12}$ were around 560 nm and 545 nm, respectively. $Y_3(Al,\;Ga)_5O_{12}:Ce^{3+}$ is a red-emitting phosphor; it has a high efficiency for operation under near UV excitation, and may be a promising candidate for photonic applications.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.177-183
• /
• 2007

In this study, nano-sized poly(vinyl acetate) (PVAc) particles containing lavender oil as a core material were prepared by using emulsification-diffusion method. Effects of experimental parameters on the characteristics and the release behavior were examined with a field emission- scanning electron microscope, an electrophoretic light scattering spectrophotometer, a visible spectrophotometer and a high performance liquid chromatography The resulting aromatic particles could be prepared in nano-sized globular shapes with the mean particle size of 224 nm by controlling the experimental conditions. From the evaluation of release properties of aromatic PVAc nanoparticles with or without PVA coating, it was found that the aromatic particles coated with PVA show more sustaining and stable release behaviors. Our research on aromatic PVAc nanoparticles could be applied for durable fragrant finishing for textiles, leather products and so on.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.3
• /
• pp.179-191
• /
• 2009

The objective of this study was to investigate the effect of ethanol on the emulsion prepared by poly(oxyethylene) hydrogenated castor oils (HCOs)/oil/ethanol/water system. Emulsions were prepared using homogenizer as high-energy method. To evaluate effect of ethanol on the emulsion, physical properties such as droplet size and size distribution were determined and other components were almost fixed to analyze the effect of ethanol on the surfactant. In case of HCO-20, the droplet diameter was in micrometers and the droplet size was gradually deceased as the ethanol concentration was increased. The droplet diameter of nano-emulsion containing 4.00 % of HCO-30 was shown in nanometers and its mean droplet size was $128.15{\pm}1.06nm$ and the most stable at the 4.25 % of ethanol contents by the Form. 1 and $136.10{\pm}0.99nm$ at the 3.50 % of ethanol contents by the Form. 2. Similarly, the droplet diameter of nano-emulsion containing 4.00 % of HCO-40 and 4.50 % ethanol by the Form. 1 was $115.85{\pm}0.78nm$ and $121.15{\pm}0.35nm$ at the 3.25 % of ethanol by the Form. 2 and both size distributions were also narrow. Finally, the droplet size of nano-emulsion containing 4.00 % of HCO-60 and 2.25 % ethanol was $262.35{\pm}0.64nm$ and the most stable. The higher ethanol concentrations became the smaller size of emulsion became in the microscale emulsion but we determined nano-emulsion had a minimum size at a certain ethanol concentration. The results showed that the breakdown process of this nano-emulsion could be attributed to Ostwald ripening. This study about effect of ethanol on the emulsion showed that ethanol contents to prepare a stable emulsion could be determined as studying the effect of ethanol on the emulsion with the type of surfactants.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.51-57
• /
• 2010

As a recycling of Si sludge from Si wafer process, a Si-SiC-CuO-C composite material was synthesized and investigated as an anode material for lithium batteries. The Si sludge consisted of Si, SiC, machine oil, and metallic impurities. The oil and metal impurities was removed by organic washing, magnetic separation, and acid washing. The Si-SiC-CuO-C composite from the recovered Si-SiC mixture was prepared by high-energy mechanical milling. According to the electrochemical tests such as charge-discharge capacity and cycling behavior, it showed the improved cycle performance. The SiC and CuO-related phases were presumed to restrain the volume expansion of the anode and Fe, however, should be removed below 10 ppm prior to synthesis of the composite because it caused the capacity loss of the active material itself.