• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.522-528
• /
• 2011

Artificial basilar membranes made of PVDF(polyvinylidene fluoride) are manufactured using microfabrication processes. The mechanical behavior of PVDF artificial basilar membrane was measured to evaluate its performance as a mechanical frequency analyzer using scanning LDV(laser Doppler vibrometer). The experimental setup consists of the microfabricated artificial basilar membrane, a loud speaker connected to an amplifier for generating acoustic pressure of specific spectral pattern, and a scanning LDV with controlling unit for measuring the displacement of the membrane on the incoming acoustic stimulation. The microfabricated artificial basilar membrane was attached tightly upon a package containing a chamber which can be filled with silicone oil before placed on the experimental setup stage. The experiment results showed that the microfabricated artificial basilar membrane has a property as a mechanical frequency analyzer.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.93-99
• /
• 2003

In this study, new shock absorbing system is proposed by using nano-technology based on the theoretical analysis. The new shock absorbing system is complementary to the hydraulic damper, having a cylinder-piston-orifice construction. Particularly for new shock absorbing system, the hydraulic oil is replaced by a colloidal suspension, which is composed of a porous matrix and a lyophobic fluid. The matrix of the suspension is consisted of porous micro-grains with a special architecture: they present nano-pores serially connected to micro-cavities. Until now, only experimentally qualitative studies of new shock absorbing system have been performed, but the mechanism of energy dissipation has not been clarified. This paper presents a modeling and theoretical analysis of the new shock absorbing system thermodynamics, nono-flows and energy dissipation. Compared with hydraulic system, the new shock absorbing system behaves more efficiently, which absorb a large amount of mechanical energy, without heating. The theoretical computations agree reasonably well with the experimental results. As a result. the proposed new shock absorbing system was proved to be an effective one, which can replace with the conventional one.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.153-158
• /
• 2004

In cosmetics, the saturated lecithin, one of the main surfactants to prepare liposome has been used for its stability but it has been substituting with unsaturated lecithin which has excellent skin affinity and penetration property. So we studied to prepare nano-liposome that size of particles were below than 50nm by unsaturated lecithin. It was important that many factors including solvent such as propylene glycol, pH balance, homogenizing pressure, various cosurfactants and stabilizers to make stable nano-liposome. In our experimental conditions, cosurfactants with stearate class as lipophilic part were more suitable than others for our purpose. But in liposome by saturated lecithin, cosurfactants had negative effect and appropriate amount of oil should be used to be stable. These results indicated that unsaturated lecithin were more suitable than saturated lecithin to prepare nano-liposome.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.5
• /
• pp.451-457
• /
• 2014

Surface roughness of mechanical components is an important factor which affects the tribological phenomena. Various surface patterns have been applied to surfaces to improve the tribological characteristics of mechanical components. In this work, the friction reduction effect of micropatterns on silicon was investigated. For this purpose, micro-dimple patterns were fabricated on silicon wafer by DRIE process. In the friction experiments silicone oil was used as lubricant. Also, the lubricant was cleaned to simulate a lubricant depleted condition. In depleted lubricated condition, friction coefficient of micro-pattern specimens was lower than specimens without micro-patterns. It was found that friction reduction effect of micro-pattern could be successfully maintained even after cleaning the lubricant on the surface.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1218-1224
• /
• 2018

Pressure-dependent structural and morphological changes of two amphibole minerals, tremolite and actinolite, were investigated up to 7.0 GPa using synchrotron X-ray powder diffraction underthree different pressure transmission media (PTM): water (W), $CO_2$ and silicone oil (SI). The elastic response of tremolite and actinolite are found to be dependent on the PTM used. When using water (W) as PTM, tremolite and actinolite show normal volume contractions with bulk moduli of 74(1) and 78(1) GPa, respectively. When using $CO_2$ as PTM, we observe the formation of calcite from tremolite above 3.8(1) GPa, whereas actinolite did not show any carbonation reaction. Under silicone oil PTM, we observe modulated volume contraction behaviors in both samples, compared to water and $CO_2$ PTM, with bulk moduli in the order of 90(1) and 94(4) GPa for tremolite and actinolite, respectively.

• Advances in nano research
• /
• v.15 no.4
• /
• pp.305-313
• /
• 2023

This study is aimed to investigate the electrically conductive properties of epoxy nanocomposites exposed to an acidic environment under various mechanical loads. For simultaneous assessment of the acidic environment and mechanical load on the electrical conductivity of the samples, the samples with and without carbon nanotubes were exposed to the acidic environment under three different loading conditions for 20 days. Then, the aged samples' strength and flexural stiffness degradation under crude oil and bending stress were measured using a three-point flexural test. The aged samples in the acidic environment and under 80 percent of their intact ultimate strength revealed a 9% and 26% reduction of their electrical conductivity for samples with and without CNTs, respectively. The presence of nanoparticles declined flexural stiffness by about 16.39%. Scanning electron microscopy (SEM) images of the specimen were used to evaluate the dispersion quality of CNTs. The results of this study can be exploited in constructing conductive composite electrodes to be used in petroleum environments such as crude oil electrostatic tanks.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.45-45
• /
• 2018

홍합, 따개비 등의 접착성 해양생물은 선박의 하부나 발전소 해수 공급용 튜브에 부착하여 운영 효율을 저하 시키고, 냉각기기 고장을 유발하는 파울링(Fouling) 문제를 야기시킨다. 일반적으로 이러한 문제에 대응하기 위해서 초접착성 해양생물이 주로 부착하는 부위에 $Cu_2O$, ZnO 등을 포함한 유기화합물로 표면처리를 하여 부착방지를 하고 있지만, 이 소재들을 장시간 사용 시 해양 오염 및 부식을 가속화하는 문제를 초례하기 때문에 최근에는 사용을 금지하고 있다. 이러한 유해성 소재 문제를 해결하고자 친환경적이고 부작용이 없는 초접착성 해양생물 부착방지 소재를 개발하고자 하였다. 본 연구에서는 낮은 표면장력을 갖는 PDMS(Polydimethylsiloxane) 소재를 기반으로 소수성 oil을 침투시킨 I-PDMS(Oil-Polydimethylsiloxane) 표면처리법을 고안하였고, 이 방법을 활용하여 초접착성 해양생물에 대한 부착방지 성능을 향상시키고자 하였다. 기존의 개발품들 보다 성능이 향상된 I-PDMS 제조하고자, Nano-indentation을 이용한 기계적 특성 평가, X컷 및 cross-cut을 이용한 부착력 평가, 실제 바다환경에서 해양생물의 부착력 시험, 바다 환경을 모사한 수조에서의 I-PDMS와 비교군 기판에서의 홍합 거동, 홍합과 기판의 접착강도 시험, 해양 미생물 평가를 실시하였으며, 이를 통해서 I-PDMS 성능 및 내구성을 입증하고자 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.46-46
• /
• 2008

스텔스 기능을 가진 군사용 항공기는 레이다 망의 추적을 피하기 위해 일반 냉각수 대신에 절연유를 냉각매체로 사용한다. 그러나 절연유는 물에 비하여 열전달특성이 매우 낮기 때문에 항공기 전기전자 기기/부품 발열부를 효과적으로 냉각시키지 못하는 한계성을 가지고 있다. 따라서 본 연구에서는 나노유체(Nanofluid) 개념을 이용하여 절연유에 알루미나 및 질화알루미늄 나노분말을 미랑 분산시킨 나노절연유를 제조하고 이것의 열전달특성을 순수 절연유의 그것과 비교 평가함으로써, 냉각특성이 크게 개선된 새로운 냉매로서의 적용 가능성을 확인하고자 하였다. 다만 나노절연유를 제조함에 있어서 가장 큰 장애물은 오일에 대한 분산성 확보에 있기 때문에, 비드밀 및 초음파를 이용한 나노분말 응집체의 습식분산 및 분산제를 이용한 친유성 표면개질을 동시에 수행함으로써 장시간 안정된 분산성을 확보하도록 노력하였다. 나노유체의 열전도도 및 대류열전달계수는 비정상열선법을 이용하여 측정하였으며, 유체 속의 분말 분산 상태는 원심력을 이용한 분산안정성 평가장치 및 cryo FE-SEM을 이용하여 확인하였다. 또한 분말 형상이 대류열전달에 미치는 영향을 조사하기 위하여 알루미나 나노분말은 구상과 침상의 분말을 모두 사용하였고, 질화알루미늄 외에 다이아몬드 나노절연유도 함께 제조, 평가함으로써 냉각 및 절연특성, 그리고 물리화학적 안정성이 우수하고 실적용 가능성이 가장 높은 재료를 도출하고자 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.521-522
• /
• 2010

• KSTLE International Journal
• /
• v.7 no.1
• /
• pp.18-21
• /
• 2006

The electrorheology of hollow PANI derivative suspensions in silicone oil was investigated by varying the electric fields and shear rates, respectively. The hollow PANI derivative susepnsions showed a typical electrorheological (ER) response caused by the polarizability of an amide polar group and shear yield stress due to the formation of chains upon application of an electric field. The shear stress for the hollow PANI succinate suspension exhibited an electric field power of 0.67. On the basis of the experimental results, the newly synthesized hollow PANI derivative suspensions were found to be an anhydrous ER fluid.