• 제목/요약/키워드: Nail injury

검색결과 34건 처리시간 0.033초

페인트 신나에 의한 수지 고압 손상의 경험 (High-Pressure Finger Injection Injury Caused by Paint Thinner: Case Report)

  • 송진우;최환준;김미선
    • Archives of Plastic Surgery
    • /
    • 제34권2호
    • /
    • pp.269-273
    • /
    • 2007
  • Purpose: High-pressure injection(HPI) injury is an injury caused by accidental injection of substances by industrial equipment. HPI injury of the hand is a serious injury that can be potentially devastating. There have been a number of publications on the results of its treatment and its functional outcome of these hands. Unfortunately, the clinical outcomes were unsatisfactory following an initial treatment approach of digital expression of the injection material, elevation, soaks, dressing changes, and antibiotics. Methods: A 43-year-old right handed man sustained a high pressure injection injury to the tip of the left index finger. The injected material was industrial paint thinner. Tissue necrosis was noted at the pulp of the finger. Several debridements and irrigation were required. A pedicled chest flap transfer was performed on the eighteenth day after injury as the dorsal nail complex remained viable. This is a retrospective review of our experience with high-pressure finger injection injury caused by paint. A literature review, retrospective chart and radiologic review were presented. Results: Follow-up length was about 1 year. The injuried hand was left nondominant hand, the index. Patient complaints were cold intolerance, paresthesia, contact pain, and impairment of activities of daily living. Conclusion: The outcome of high-pressure injection injuries of the hand is affected by many factors. The time between injury and operative treatment has been regarded as a key determinant by a number of authors. The nature of the injected material is probably more important. It has been noted by many authors that injuries with paints have a worse outcome than those with oil or grease. This study confirms the fact that high-pressure injection injury caused by paint thinner to the hand is a significant problem. Virtually a patient suffers sequelae of this injury. The injury has significant repercussions for future function and reintegration into the work force.

Ender Nail을 이용한 경골간부 골절의 치료 (Treatment of the Tibia Shaft Fractures with Ender Nails)

  • 김인기;이동철;서재성;안면환;김세동;안종철
    • Journal of Yeungnam Medical Science
    • /
    • 제9권1호
    • /
    • pp.130-136
    • /
    • 1992
  • 본 영남대학교 의과대학 부속병원 정형외과에서는 1986년 12월에서 1991년 11월까지 경부 간부 골절 31례에 대하여 Ender nail을 시행하여 다음과 같은 결과를 얻었다. 1. 환자의 평균연령은 37.3세였고, 남자에게서 3배가 많았으며, 교통사고가 가장 많은 원인이었다(67%). 2. 폐쇄성 골절이 20례, 개방성 골절이 11례였으며, 분쇄골절과 분절골절이 18례(57.7%)였고, 중간부 골절이 16례로 가장 많았다. 3. 동반손상이 19례에서 있었고, 수상후 수술까지의 기간은 평균 7.6일이었다. 4. 평균 골유합 기간은 18.9주였으며, 2례에서 지연유합을 보였다. 5. 합병증으로 하지 단축이 2례, 각형성 변형이 3례, 관절 운동 제한 2례, 감염이 연부조직에 1례 있었다. 이상 경골 간부골절 치료에 사용한 Ender nail은 시술의 간편성, 적절한 고정성과 운동성, 비교적 폭넓은 적용 범위등으로 좋은 치료 결과를 기대할 수 있는 방법으로 사료된다.

  • PDF

Surgical Treatment of Ipsilateral Multi-Level Femoral Fracture Treated Using Antegrade Intramedullary Nail

  • Kim, Beom-Soo;Cho, Jae-Woo;Yeo, Do-Hyun;Oh, Jong-Keon
    • Journal of Trauma and Injury
    • /
    • 제31권2호
    • /
    • pp.96-102
    • /
    • 2018
  • Ipsilateral fractures of proximal femur with shaft and condylar region are very rare. Current concept of management is based on fixation of each fracture as independent entity using separate fixation modalities for proximal and distal parts of femur. However, we considered that antegrade femoral nailing with cephalomedullary screw fixation is a good option for ipsilateral multi-level femoral fractures. Here, we present an experience of satisfactory treatment for ipsilateral femoral neck fracture, subtrochanteric fracture, comminuted shaft fracture with supracondylar fracture following road traffic accident.

Exchange Nailing for Aseptic Nonunion of the Femoral Shaft after Intramedullary Nailing

  • Ha, Sung-Soo;Oh, Chang-Wug;Jung, Jae-Wook;Kim, Joon-Woo;Park, Kyeong-Hyeon;Kim, Seong-Min
    • Journal of Trauma and Injury
    • /
    • 제33권2호
    • /
    • pp.104-111
    • /
    • 2020
  • Purpose: Although exchange nailing is a standard method of treating femoral shaft nonunion, various rates of healing, ranging from 72% to 100%, have been reported. The purpose of this study was to evaluate the efficacy of exchange nailing in femoral shaft nonunion. Methods: We retrospectively reviewed 30 cases of aseptic femoral shaft nonunion after intramedullary nailing. The mean postsurgical period of nonunion was 66.8 weeks. A nail at least 2 mm larger in diameter was selected to replace the previous nail after reaming. Distal fixation was performed using at least two interlocking screws. The success of the procedure was determined by the finding of union on simple radiographs. Possible reasons for failure were analyzed, including the location of nonunion, the type of nonunion, and the number of screws used for distal fixation. Results: Of the 30 cases, 27 achieved primary healing with the technique of exchange nailing. The average time to achieve union was 23.1 weeks (range, 13.7-36.9 weeks). The three failures involved nonunion at the isthmic level (three of 15 cases), not at the infraisthmic level (zero of 15 cases). Of eight cases of oligotrophic nonunion, two (25%) failed to heal, and of 22 cases of hypertrophic nonunion, one (4.5%) failed to heal. Of 11 cases involving two screws at the distal fixation, two (18.2%) failed to heal, and of 19 cases involving three or more screws, one (5.3%) failed to heal. None of these findings was statistically significant. Conclusions: Exchange nailing may enable successful healing in cases of aseptic nonunion of the femoral shaft. Although nonunion at the isthmic level, oligotrophic nonunion, and weaker distal fixation seemed to be associated with a higher chance of failure, further study is needed to confirm those findings.

한국인에서의 직선형 전향적 상완골 골수 내 금속정의 해부학적 적합성 분석 (Analysis of Anatomical Conformity of Straight Antegrade Humeral Intramedullary Nail in Korean)

  • 최성;지승민;황성문;신동주
    • 대한정형외과학회지
    • /
    • 제56권6호
    • /
    • pp.498-503
    • /
    • 2021
  • 목적: 컴퓨터 단층 촬영 영상을 이용하여 한국인에서 상완골 근위부 골절 치료에 적용되는 직선형 전향적 상완골 골수 내 금속정의 이상적 삽입점 위치를 알아보고 해부학적 적합성을 분석하고자 한다. 대상 및 방법: 2014년 5월부터 2016년 10월까지 견관절 외상으로 컴퓨터 단층 촬영을 시행한 환자 중 건측 견관절을 동시에 촬영한 한국인 74예를 대상으로 하였으며, 평균 나이는 64.5세(범위, 22-95세)였다. 영상의학적 평가는 건측 근위 상완골의 컴퓨터 단층 촬영 영상을 이용하여 다면 재구성(multiplanar reconstruction) 기법을 이용하였다. 직선형 골수정의 이상적 삽입점은 상완골 골수강 내 중심축과 상완골두가 만나는 점으로 선정하였으며 삽입점과 국소 해부학적 위치와의 거리를 측정하였다. 삽입점에서 극상건 부착부의 가장 내측까지의 관상면상 거리를 임계거리(critical distance)로 정의하고 이를 이용하여 삽입점과 회전근개 부착부와의 근접성을 평가하였다. 회전근개의 손상을 피하고 충분한 고정력을 얻기 위한 임계거리는 Euler 등이 제시한 대로 8mm 이상 확보 되어야 하며, 8 mm 미만인 경우를 위험형(critical type)으로 정의하였다. 임계거리와 성별, 나이, 키, 몸무게, 신체용적지수(body mass index)와의 통계적 유의성을 확인하였다. 결과: 이 연구에서 이상적인 삽입점의 위치는 이두구 외측연에서 시상면상 거리인 전후 거리는 평균 11.5 mm (범위, 4.0-16.6), 대결절의 가장 외측연에서 관상면상 거리인 내외 거리는 평균 20.5 mm (범위, 16.3-27.4)였다. 이상적 삽입점에서 극상건 부착부의 가장 내측까지의 관상면상 거리인 임계거리는 평균 8.0 mm (범위, 4.1-16.6)이며, 임계거리가 8 mm 미만인 위험형(critical type)ㅏ이은 74예 중 41예(55.4%)였다. 결론: 한국인에서 직선형 전향적 상완골 골수 내 금속정의 사용시, 상완 이두구의 외측연에서 후방으로 11.5 mm, 대결절 외측연에서 내측으로 20.5 mm 지점이 평균적인 이상적 삽입점의 위치였다. 하지만 55.4%의 경우에서 이상적 삽입점의 위치로 삽입할 경우 회전근개의 손상을 줄 수 있는 위험형(critical type)이였으므로, 술 전 치료방법의 선택 과정에서 환자 개개인의 해부학적 특성을 충분히 고려하여야 한다.

원위 수지 재접합술 뒤 간헐적 실혈 요법 (Intermittent Bleeding Method after Replantation o the Distal Phalanx)

  • 이병호;박찬일;이준모
    • Archives of Reconstructive Microsurgery
    • /
    • 제20권1호
    • /
    • pp.38-42
    • /
    • 2011
  • Purpose: To evaluate the effect of intermittent bleeding method in the distal phalanx replantation. Materials and Methods: From January 2007 through June 2009, authors have replanted 117 cases of distal phalangeal amputation in adults at Soo Hospital and Chonbuk National University Hospital. Cases of zone II were 60 cases and zone III 57 according to Allen classification. Male to female ratio was 8.7:1.3. The most common cause was machinery injury in the factory, 98 cases(83.8%), next one was belt injury of the machine, 11 cases(9.4%) and others, 8(6.8%). At least one digital artery and digital nerve were anastomosed under the operating microscope, but vein was impossible to anastomosis as unable to find out in the zone II and III. After anastomosis of one or more digital arteries and nerves, heparine(6,000-10,000 units) was kept to intravenous injection for 24 hours and at the same time fish mouth incision in 2-3 millimeter diameter was made in the distal radial and ulnar margin of the replanted distal phanlanx. From the first 30 minutes to an hour after replantation, incision site was swabbed with heparinized cotton ball for 5 minutes in every 30 to 40 minutes to make sure perfusion for 24 hours, every an hour at the second day, every two hours at the postoperative third to fifth day. Results: 92 cases(78.6%) was completely survived at average postoperative third week follow-up and satisfied with preservation of the finger nail, digit length, good range of motion of the distal interphalangeal joint and acceptable sensibility at average 1.2 years follow-up. Conclusions: Intermittant bleeding method in replantation of crushed distal phalanx impossible to anastomosis of vein at zone II and III of Allen classification was regarded as one of the notable salvage procedure.

  • PDF

Acticoat®를 이용한 불산에 의한 화학 화상의 치료 (Treatment for Hydrofluoric Acid Chemical Burn Using Acticoat®)

  • 최환준;위서영;최창용
    • Archives of Plastic Surgery
    • /
    • 제35권4호
    • /
    • pp.407-412
    • /
    • 2008
  • Purpose: Hydrofluoric acid(HF) is one of the most dangerous mineral acids with the dissociated fluoride ions. The initial corrosive burn is caused by free hydrogen ion, and the second and more severe burn is caused by penetration of fluoride ions into subcutaneous tissues. Silver is a cation producing dressing, an effective antimicrobial agent, but older silver-containing formulations are rapidly inactivated by wound environment, requiring frequent replenishment. But, $Acticoat^{(R)}$ is a relatively new form of silver dressing which helps avoid the problems of earlier agents. The aim of this study is to evaluate effects of $Acticoat^{(R)}$, silver-containing dressing on the treatment for HF injury wound. Methods: From september 2006 to september 2007, the study was carried out with 10 patients who had HF partial thickness burns. $Acticoat^{(R)}$ dressing and 10% calcium gluconate wet gauze dressings in 10 cases. As a principle, in the emergency treatment, partial or complete removal of the nail and early bullectomy along with copious washing with normal saline was done, depending on the degree of HF invasion of the wound. Wound was dressed with $Acticoat^{(R)}$ and 10% calcium gluconate solution. The effect of dressing was investgated by serial bacterial culture and wound exudates assessment. Results: We therefore reviewed 10 cases of HF-induced chemical burns and treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae. Conclusion: As the industrial sector develops, the use of HF is increasing more and more, leading to increased incidences of HF-induced chemical burns. The education of patients regarding this subject should be empathized accordingly. In conclusion, $Acticoat^{(R)}$ dressing is a better choice for HF partial thickness burn injuries because of shorter healing time, less pain and more comfortable dressing.

측두하악 관절 장애의 평가 (Clinical Assessment of Temporomandibular Joint Dysfunction)

  • 류재관;김종순
    • 대한물리치료과학회지
    • /
    • 제5권4호
    • /
    • pp.717-728
    • /
    • 1998
  • The Temporomandibural joint(TMJ) is one of the most frequently used joint in the body as $1,500{\sim}2,000$ times per day for the activities of chewing, swallowing, talking, yawing and sneezing. The TMJ are formed by condylar process of mandible and mandible fossa of temporal bone, separated by an articular disc. This articular disc divides into two cavities as upper cavity and lower cavity. The gliding movement occurs in the upper cavity of the joint, whereas hinge movement occurs in the lower cavity. The movements that are allowed at the TMJ are opening, closing, protrusion, retraction and lateral movement. A cause of TMJ dysfunction are capsulitis, internal derangement, osteoarthritis, rheumatoid arthritis, infection and inflammation near the joint, trauma on joint, ankylosis, subluxation or dislocation of joint, injury of articular disc, myositis, muscle contracture or spasm, myofascial pain dysfunction syndrome, dyskinesia of masticatory muscles, developmental abnormality, tumor, connective tissue disease, fibrosis, malocclusion, swallowing abnormality, wrong habits such as bite nail or hair, bruxism, psycological stress and Costen syndrome etc. Assessment of TMJ dysfunction consist of interview, observation, functional examination, palpation, reflex test, joint play test, electromyography and radiologic examination and behavioral and psycological assessment etc.

  • PDF

원위 대퇴골 골절에 대한 고령 환자군의 치료 결과 비교 -임상적, 방사선학적 비교- (Clinical and Radiological Outcome of Distal Femoral Fracture in Elderly Patient Group)

  • 박희곤;김연준;장호성
    • Journal of Trauma and Injury
    • /
    • 제26권4호
    • /
    • pp.286-290
    • /
    • 2013
  • Purpose: To report the postoperative Clinical and Radiological outcomes following distal femoral fractures in elderly patients compared with young patients. Methods: From March, 1996 to March, 2012, 83 patients who received surgical treatment for fractures of the distal femur were enrolled in this retrospective study. Ages more than 65 was named group A. Group A was 49 cases and mean age is 72.5 year(65~91year). Group B was 49 cases and mean age is 45.7 year(16~61 year). Surgical methods are retrograde IM nail, locking compression plate, cannulated screw and postoperative rehabilitation is no difference between two groups. Clinical results were evaluated using Neer scores, radiographic results and the presence of clinical complications. Results: The mean union period was 18.4(12-40) weeks in group A and 17(10-24) weeks in group B. Neer functional scores are no significant statistical difference between two groups. There are 5 cases metal breakage in group A and 1case in group B. There are 3 cases nonunion in group A and 1 case in group B. Conclusion: In the case of fractures of the distal femur in elderly patients, locking plate using minimally invasive percutaneous periosteal osteosynthesis (MIPPO) technique may be one of the most effective methods and preoperative bone stock evaluation in important.

대퇴골 간부 골절시 사용한 금속물의 금속부전(Metal failure)의 기전에 대한 연구 (A study of the cause of metal failure in treatment of femur shaft fracture - Fractographical and clinical analysis of metal failure-)

  • 전춘배;서재성;안면환;안종철;인주철
    • Journal of Yeungnam Medical Science
    • /
    • 제7권1호
    • /
    • pp.81-93
    • /
    • 1990
  • 1983년 5월부터 1989년 9월까지 본 영남의료원 정형외과에 대퇴골 간부골절시 사용한 금속 내 고정물의 금속 부전으로 입원한 경우 중 부전된 금속의 표면관찰이 가능한 8례에 대한 임상적 고찰 및 부전된 금속 파손 표면의 관찰을 통해 확인한 파손 원인을 요약하면 다음과 같다. 1. 금속 부전이 발생 내고정물의 종류는 압박금속판 5례, Jewett nail 1례, Rowe plate screw 1례, interlocking nail 1례였다. 2. 금속 부전의 임상적 추정에 의한 원인으로는 반대편 피질골 결손 5례, 부적절한 위치선정 1례 및 부적절한 금속선택 1례였다. 3. 금속 내고정후 금속 부전이 되기까지의 기간을 보면, 4개월이 1례, 6개월에서 12개월 사이가 6례, 3년이 1례였다. 4. 부전된 내고정물의 파손면 관찰을 통해 확인한 금속부전의 원인을 보면, 첫째, impact failure 1례 둘째, fatigue failure 6례 machining mark가 있어 이것이 stress riser로서 역할을 한 것으로 보이는 경우가 4례였으며, 이의 형태는 low consistent cyclic fatigue failure와 irregular cyclic fatigue failure의 형태를 관찰할 수 있었다. 셋째, Stress corrosion crack 1례를 관찰할 수 있었다. 5. 316L Stainless Steel은 내부식성이 좋은 금속이지만 fretting에 의해 특유의 부동태 피막이 손상되면 pitting corrosion을 일으키며 경우에 따라서는 파손의 기점으로 작용되어 failure의 주요 원인이 되기도 한다. 6. screw hole의 가공시 기계에 의한 손상 및 기구(implant) 제조 과정중 손상이 plate의 failure를 유발하는 중요한 원인이 될 수도 있다. 기계에 의한 손상은 응력을 집중시키므로 plate가 파손되기 쉽게 한다. 이상의 결과 임상적 추정에 의한 원인 이외에도 부전된 금속파손면 관찰을 통해 중요한 다른 원인을 찾을 수 있었으므로, 금속부전의 예방을 위해 앞으로 이 방향으로의 계속적인 연구가 필요할 것으로 사료된다.

  • PDF