• 제목/요약/키워드: NaS Battery

검색결과 51건 처리시간 0.022초

배터리 분리막을 위한 이온교환형 PVdF 맴브레인의 방사선 그래프트법에 의한 간편한 제조법 (Convenient Preparation of Ion-Exchange PVdF Membranes by a Radiation-Induced Graft Polymerization for a Battery Separator)

  • 김상겸;류정호;권해두;장주환;최성호
    • 폴리머
    • /
    • 제34권2호
    • /
    • pp.126-132
    • /
    • 2010
  • 메탄올 용매에서 고분자 촉진 단량체와 소디윰 스티렌 슐포네이트를 방사선 그래프트 방법으로 양이온 교환 PVdF 맴브레인을 제조하였다. 고분자 촉진 단량체로서 스티렌, 아크릴산, 비닐 피롤리돈을 사용하였다. 또한, 음이온 교환 PVdF 맴브레인도 방사선 그래프트 중합법에 의해 제조하였다. 양이온 및 음이온 교환 PVdF 맴브레인은 SEM, XPS 그리고 열분석기기를 통해 특성평가를 하였고 성공적으로 합성됨을 확인할 수 있었다. 그래프트 수율, 이온교환기의 양 및 침투율은 각각 30.0~32.3%, 2.81~3.01 mmol/g 그리고 66.6~147%로 평가되었으며, 20 $^{\circ}C$에서 이온 전도도를 측정한 결과 0.020~0.053 S/cm 이었다. 최종적으로, 제조된 양이온 및 음이온교환 PVdF 맴브레인은 전지격막으로서 충분히 사용될 수 있음을 확인할 수 있었다.

$\beta$-$Al_2O_3$ 고체전해질의 퇴화모델 (A Model for Degradation of $\beta$-$Al_2O_3$ Solid Electrolyte)

  • 송효일;김응수;윤기현
    • 한국세라믹학회지
    • /
    • 제22권5호
    • /
    • pp.23-28
    • /
    • 1985
  • A model for degradation of $eta$-$Al_2O_3$ is derived from sress generated by Poiseuille pressure capillary effect and effulent flux in charging process of Na-S Battery. Critical current density for degradation increase with increasing the crack length and crack tip radius. radius 10-7cm and crack length 10-5cm Dependence of crack growth velocity on crack lengh is seperated two regions that is for a large crack length it is predominated by Poiseuille pressure and effulent fluex but in the case of small crack length it is controlled by capillary effect.

  • PDF

Effect of Alloying Elements on the Electrochemical Characteristics of an Al Alloy Electrode for Al-air Batteries in 4 M NaOH solution

  • Choi, Yun-Il;Kalubarme, R.S.;Jang, Hee-Jin;Park, Chan-Jin
    • 대한금속재료학회지
    • /
    • 제49권11호
    • /
    • pp.839-844
    • /
    • 2011
  • We examined the effects of alloying elements such as Fe, Ga, In, Sn, Mg, and Mn on the electrochemical characteristics of Al-based alloys for Al-air batteries by potentiodynamic polarization tests and electrochemical impedance spectroscopy. The corrosion potential of an Al anode was lowered by the addition of Ga and Sn, resulting in an increase in the cell voltage compared with a pure Al electrode. Fe was not beneficial to improve the electrochemical properties of the Al anode in that it caused a decrease in the cell voltage and reduced corrosion rate slightly. In, Mn, Sn, and Mg decreased the corrosion rate of the Al alloys, while Ga enhanced corrosion significantly and accelerated consumption of the anode.

에너지 저장기술의 최적 서비스 선정 방법 (Optimal ES (Energy Storage) Service Selection Method)

  • 이지현;제갈성;김현실;맹종호
    • Current Photovoltaic Research
    • /
    • 제11권2호
    • /
    • pp.58-65
    • /
    • 2023
  • The expanding significance of energy storage (ES) technology is increasing the acceptability of power systems by augmenting renewable energy supply. To deploy such ES technologies, we must select the optimal technology that meets the requirements of the system and confirm the technical and economic feasibility of the business model based on it. Herein, we propose a method and tool for selecting the optimal ES technology and service suitable for meeting the requirements of the system, based on its performance characteristics. The method described in this study can be used to discover and apply various ES technologies and develop business models with excellent economic feasibility.

리튬-철계 산화물 전극의 전기화학 거동 및 리튬의 화학확산 계수 측정 (Electrochemical Behavior of Lithium-Iron Oxide Electrode and Measurement of Chemical Diffusion Coefficient of Lithium)

  • 이정준;정원중;주재백;손태원;조원일;조병원;김형선
    • 전기화학회지
    • /
    • 제4권4호
    • /
    • pp.139-145
    • /
    • 2001
  • 본 연구에서는 리튬전지내 양극 재료로서 리튬철계 산화물을 제조하여 전극재료의 다양한 조성에 따른 전기화학적 특성을 고찰하고자 하였다 출발 물질인 $FeCl_3-6H_2O,\; NaOH,\;LiOH$를 혼합하여 저온으로 가열하여 층상의 $LiFeO_2$를 합성하였으며 출발 물질의 조성비를 바꾸어 그 영향을 조사하였다. 그 결과 NaOH의 첨가량이 증가할수록 전극의 용량은 감소하나 효율 및 용량의 감소율은 작아짐을 알 수 있었다. $NaOH/FeCl_3/LiOH$의 중량비를 2/1/7로 조성하여 합성하였을 때 가장 큰 용량을 보였으나 효율은 30회 순환 후 급격히 감소하였다. 층상의 $LiFeO_2$ 양극을 사용한 리튬 전지의 충방전 실험을 수행한 결과 이 셀은 1.5-4.5V의 범위에서 가역적임을 알 수 있었다 CPR방법을 사용하여 1M $LiPF_6/EC/DEC$ 전해질에서 확산계수를 측정하였다. 확산계수는 0.5$10^{-11}cm^2/s$임을 알 수 있었다.

티타늄 산화물과 유화물의 전지 전압을 결정하는 요소에 대한 제일원리계산 (First Principles Study on Factors Determining Battery Voltages of TiS2 and TiO2)

  • 김희진;문원진;김영민;배경서;윤재식;이영미;국진선;김양수
    • 한국표면공학회지
    • /
    • 제42권1호
    • /
    • pp.8-12
    • /
    • 2009
  • Electronic structures and chemical bonding of Li-intercalated $LiTiS_2$ and $LiTiO_2$ were investigated by using discrete variational $X{\alpha}$ method as a first-principles molecular-orbital method. ${\alpha}-NaFeO_2$ structure is the equilibrium structure for $LiCoO_2$, which is widely used as a commercial cathode material for lithium secondary battery. The study especially focused on the charge state of Li ions and the magnitude of covalency around Li ions. The average voltage of lithium intercalation was calculated using pseudopotential method and the average intercalation voltage of $LiTiO_2$ was higher than that of $LiTiS_2$. It can be explained by the differences in Mulliken charge of lithium and the bond overlap population between the intercalated Li ions and anions in $LiTiO_2$ as well as $LiTiS_2$. The Mulliken charge, which means the ionicity of Li atom, was approximately 0.12 in $LiTiS_2$ and the bond overlap population (BOP) indicating the covalency between Ti and S was about 0.339. One the other hands, the Mulliken charge of lithium was about 0.79, which means that Li is fully ionized. The BOP, the covalency between Ti and O, was 0.181 in $LiTiO_2$. Because of high ionicity of Li and the weak covalency between Ti and the nearest anion, $LiTiO_2$ has a higher intercalation voltage than that of $LiTiS_2$.

풍력발전의 전력계통 동적 수용한계 산정 및 BESS 적용방안 분석 (Study on Calculation of Dynamic Penetration Limit of WTG and Applications of BESS in Power Systems)

  • Gwon, Han Na;Choi, Woo Yeong;Kook, Kyugn Soo
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제1권1호
    • /
    • pp.29-32
    • /
    • 2015
  • 풍력발전기와 같은 신재생에너지원은 기존 동기화력발전기의 특성과 매우 다르기 때문에, 상정고장과 같은 가혹한 상황에서는 주파수 변동에 신속히 대응하지 못하므로 주파응답성능을 저하시킬 수 밖에 없다. 특히, 풍력발전의 수용률이 높은 상황에서 상정고장이 발생한 경우, 전력계통에 안정화를 위해서 풍력발전의 수용이 더욱 제한될 가능성이 잠재되어 있다. 이를 위해, 본 논문에서는 풍력발전의 전력계통 동적 수용한계를 산정하는 절차를 구현하고, 산출된 결과로부터 풍력발전의 동적 수용한계를 증대시키기 위한 BESS의 적용방안을 모색하였다.

폐 알칼리망간전지의 산 침출액으로부터 버네사이트(δ-MnO2)의 제조 및 1-naphthol 제거 (Preparation of Birnessite (δ-MnO2) from Acid Leaching Solution of Spent Alkaline Manganese Batteries and Removals of 1-naphthol)

  • 엄원숙;이한샘;이동석;신현상
    • 대한환경공학회지
    • /
    • 제38권11호
    • /
    • pp.603-610
    • /
    • 2016
  • 본 연구에서는 폐 알칼리망간전지 분말(spent alkaline manganese battery powder, SABP <8 mesh)의 산 침출액으로부터 분리한 망간이온을 이용하여 산화-중합반응 촉매인 버네사이트를 제조하였고, 1-naphthol (1-NP)을 대상으로 페놀계 화합물의 제거 반응성을 조사하였다. 망간산화물의 결정상과 반응성은 순수 망간시약($MnSO_4$, $MnCl_2$)을 사용하여 합성한 망간산화물(manganese oxide, MOs) 및 기존의 McKenzie 합성방법에 의한 Acid birnessite (A-Bir)의 결과와도 비교 평가하였다. SABP에 존재하는 망간과 아연이온은 과산화수소 존재 하에서의 황산 침출($1.0M\;H_2SO_4+10.5%\;H_2O_2$, solid/liquid (S/L)비=1/10 g/mL, $60^{\circ}C$)을 통해 각각 약 96%와 98% 회수하였다. 산 침출액으로부터 망간이온은 수산화물(NaOH) 침전을 통해 pH 8과 pH>13 조건에서 각각 69.0%와 94.3% 분리하였다. 1-NP 제거능을 토대로 SABP 산 침출액으로부터 알칼리(NaOH) 수열합성법에 의한 망간산화물의 제조를 위한 적정 OH/Mn 혼합비(M/M)는 6.0이었고, XRD 분석을 통해 버네사이트(${\delta}-MnO_2$) 결정상을 가짐을 확인하였다. pH 8 (${Mn^{2+}}_{(aq)}$)과 pH>13 ($Mn(OH)_{2(s)}$)에서 회수한 망간을 사용하여 얻은 망간산화물의 1-NP 제거 반응속도(k, at pH 6)는 각각 0.112, $0106min^{-1}$으로서 $MnSO_4$ 시약을 사용하여 얻은 망간산화물의 결과($0.117min^{-1}$)와 유사하였다. 이상의 연구를 통해 폐 알칼리망간전지 분말로부터 얻은 버네사이트는 미량 유해물질 제거를 위한 산화-중합 반응 촉매로 활용 가능함을 알 수 있었으며, 버네사이트 제조를 위한 폐 알칼리망간전지의 재활용 흐름도를 제시하였다.

Effects of GV1001 on Language Dysfunction in Patients With Moderate-to-Severe Alzheimer's Disease: Post Hoc Analysis of Severe Impairment Battery Subscales

  • Hyuk Sung Kwon;Seong-Ho Koh;Seong Hye Choi;Jee Hyang Jeong;Hae Ri Na;Chan Nyoung Lee;YoungSoon Yang;Ae Young Lee;Jae-Hong Lee;Kyung Won Park;Hyun Jeong Han;Byeong C. Kim;Jinse Park;Jee-Young Lee;Kyu-Yong Lee;Sangjae Kim
    • 대한치매학회지
    • /
    • 제22권3호
    • /
    • pp.100-108
    • /
    • 2023
  • Background and Purpose: The efficacy and safety of GV1001 have been demonstrated in patients with moderate-to-severe Alzheimer's disease (AD). In this study, we aimed to further demonstrate the effectiveness of GV1001 using subscales of the Severe Impairment Battery (SIB), which is a validated measure to assess cognitive function in patients with moderate-to-severe AD. Methods: We performed a post hoc analysis of data from a 6 month, multicenter, phase 2, randomized, double-blind, placebo-controlled trial with GV1001 (ClinicalTrials.gov, NCT03184467). Patients were randomized to receive either GV1001 or a placebo for 24 weeks. In the current study, nine subscales of SIB-social interaction, memory, orientation, language, attention, praxis, visuospatial ability, construction, and orientation to name-were compared between the treatment (GV1001 1.12 mg) and placebo groups at weeks 12 and 24. The safety endpoints for these patients were also determined based on adverse events. Results: In addition to the considerable beneficial effect of GV1001 on the SIB total score, GV1001 1.12 mg showed the most significant effect on language function at 24 weeks compared to placebo in both the full analysis set (FAS) and per-protocol set (PPS) (p=0.017 and p=0.011, respectively). The rate of adverse events did not differ significantly between the 2 groups. Conclusions: Patients with moderate-to-severe AD receiving GV1001 had greater language benefits than those receiving placebo, as measured using the SIB language subscale.

사물인터넷을 위한 저전력 보안 아키텍쳐 (Low Power Security Architecture for the Internet of Things)

  • 윤선우;박나은;이일구
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2021년도 추계학술대회
    • /
    • pp.199-201
    • /
    • 2021
  • 사물인터넷은 통신 네트워크 기술과 센서를 활용하여 시공간의 제약 없이 사람과 사물을 유기적으로 연결하고, 실시간으로 데이터를 송수신할 수 있는 기술이다. 전 산업 분야에서 활용되고 있는 사물인터넷은 디바이스의 크기, 메모리 용량, 데이터 전송 성능 등 스토리지 할당 측면의 제약사항을 가지고 있어 제한적인 배터리 용량을 효과적으로 활용할 수 있도록 전력 소모량을 관리하는 것이 중요하다. 종래 연구에서는 주로 암호 모듈의 보안 알고리즘을 경량화하여 전력 효율을 개선한 대신 보안성이 열화되는 문제가 있다. 본 연구에서는 사물인터넷 환경에서 고성능의 보안 알고리즘을 활용할 수 있는 저전력 보안 아키텍처를 제안한다. 이는 무결성 검사를 수행하는 작은 로직을 추가하여 검사 결과에 따라 위협탐지가 필요한 경우에만 보안 모듈을 실행시켜 저전력 환경에서 상대적으로 복잡도가 높은 보안 모듈을 활용해 높은 보안성과 전력 효율성을 제공할 수 있다.

  • PDF