• The Korean Journal of Zoology
• /
• v.14 no.3
• /
• pp.125-131
• /
• 1971

In order to see if NaCl affected the the emergence rate and the SD action when treated it at the pupal stage of Drosophila melanogaster, an experiment was performed in which the resistibility to NaCl at the pupal stage was examined by the emergence rate and the effects of NaCl on the SD action was studied by k values. The four SD strains and two other strains (cn bw and Oregon-R) were used and NaCl media were prepared by adding NaCl at a concentration of 0.0M, 0.1M, 0.3M, 0.5M, 0.7M, and 1.0M to the standard media for the present experiment. The following conclusions were established: 1. The emergence rate (resistibility to NaCl) when treated NaCl at the pupal stage is significantly different not only among the strains but also among concentrations of NaCl. 2. The emergence rate decreases as concentration of NaCl increases but the rate of decrease shows rather constant so that the curves of decrease are not steep. 3. The emergence rate of the cn bw and Oregon-R strains shows higher value than of the four SD strains, implying that the resistibility to the NaCl is lower in the SD strains than in the two strains; not a few flies are emerged from the media of 1.0M of NaCl. 4. The difference in k values is not significant among concentrations of NaCl but among strains, the k values of the original SD strains are rather higher and constant but those of the recombinant SD strains are rather low and unstable. 5. The SD action is not affected by NaCl as far as once emerged from the culture media whether containing NaCl or not in any developmental stage. Thus such an experiment on NaCl effect is of little value to analyze the mechanism of the SD action in D. melanogaster.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.1-5
• /
• 1998

The dispersing behaviors of oligomer-type anionic surfactants, cooligomers of diethyl maleate(CmD-Na) or maleic anhydride (CmM-Na) and $C_4{\sim}C_{16}$ alkyl vinylether, which have a different alkyl chain length of the hydrophobic group or degree of polymerization, were studied on the aqueous suspension of ${\alpha}-$ and ${\beta}-$ copper phthalocyanine and carbon black particles. In case of the side alkyl chain length of $C_4{\sim}C_{10}$ of CmD-Na, the dispersing actions were good in the concentration range of 0.01 to 0.1%. Especially, side alkyl groups played an important role in the orientation adsorption on the surface of pigment particles, and oligomers having smaller degrees of polymerization were more effective in the dispersing action, but did not affect the dispersability of carbon black.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.238-245
• /
• 2023

0.75(Bi_1/2Na_1/2)TiO₃-0.25SrTiO₃ (BNT-25ST) ceramics with high densities were successfully prepared at a sintering temperature of 1,000℃ by adding a mixture of 1 mol% CuO and 0.5 mol% Na₂CO₃ or 0.5 mol% CuO and 0.25 mol% Na₂CO₃. Double polarization-electric field (P-E) hysteresis curves and sprout-shaped bipolar strain-electric field (S-E) hysteresis curves with small negative strains were observed in the pristine and CuO-added BNT-25ST ceramics whereas the Na₂CO₃-added sample showed similar P-E and S-E curves to a typical ferroelectric. The pristine BNT-25ST ceramics showed an extremely large strain and a large-signal piezoelectric strain constant (d₃₃^*): 0.287 % at 80 kV/cm and 850 pm/V at 20 kV/cm. Similar values, 0.248 % at 80 kV/cm and 655 pm/V at 20 kV/cm, were obtained in the CuO-added sample. However, the pristine and CuO-added samples showed large hysteresis in unipolar S-E curves at an electric field of less than 20 kV/cm. The Na₂CO₃-added sample showed smaller values of the strain and d₃₃^* but displayed a linear change and small hysteresis in the unipolar S-E curve. The co-added sample with CuO and Na₂CO₃ displayed intermediate P-E and S-E hysteresis curves.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1584-1592
• /
• 2000

Three hundred nursery pigs were used in two growth assays (avg initial BW of 6.5 and 6.0 kg, respectively) to determine the effects of sodium sulfite ($Na_2SO_3$) as an extrusion aid for soy products used in diets for weanling pigs. In Exp. 1, treatments were arranged as $3{\times}2$ factorial with main effects of soy product [soybean meal (SBM), extruded SBM, and dry-extruded whole soybeans (DEWS)] and concentration of $Na_2SO_3$ (0 and 10 g/kg of soy product). The extruded SBM and DEWS treatments were processed in a dry extruder ($Insta-Pro^{(R)} $, Triple F Nutrition, Des Moines, IA) with barrel temperatures and throughputs of $169^{\circ}C$ and 578 kg/h, and $147^{\circ}C$ and 598 kg/h, respectively. All diets were formulated to 3.5 Mcal/kg DE, with 0.92% lysine for d 0 to 14, and 0.76% lysine for d 14 to 28. For d 0 to 14, there was a tendency for pigs fed diets with $Na_2SO_3$ to have greater ADG (p<0.08), and pigs fed SBM to have greater ADFI (p<0.02), thus pigs fed the extruded soy products has 15% greater gain/feed than those fed SBM (p<0.007). For d 14 to 28, there were no differences in ADG or gain/feed among pigs fed diets with SBM and those fed diets with the extruded soy products (p>0.15). However, pigs fed DEWS had greater ADG than pigs fed extruded SBM, and pigs fed $Na_2SO_3$ had greater ADG and ADFI compared to those not fed $Na_2SO_3$ (p<0.02 and 0.08, respectively). The positive response in ADG and gain/feed to the addition of $Na_2SO_3$ resulted with SBM and extruded SBM treatments, and not with DEWS (interaction effect, p<0.04). Overall (d 0 to 28), pigs fed DEWS had greater ADG (p<0.01) and gain/feed (p<0.08) than pigs fed extruded SBM. Also pigs fed diets with $Na_2SO_3$ had greater ADG, ADFI, and gain/feed compared to those fed diets without $Na_2SO_3$ (p<0.002, 0.04, and 0.04, respectively). Exp. 2 was designed as a $2{\times}3$ factorial with main effects of soy product (SBM and DEWS) and concentration of $Na_2SO_3$ (none, 7.5, and 15.0 g/kg of soy product). As in Exp. 1, all diets were formulated to 3.5 Mcal/kg DE, with 0.92% lysine for d 0 to 13, and 0.76% lysine for d 13 to 53. At a constant processing temperature (148 to $149^{\circ}C$, $Na_2SO_3$ increased throughput of the extruder (578, 595, and 602 kg/h for the 0, 7.5, and 15.0 g/kg additions, respectively). For d 0 to 13, treatment had no effect on ADG or ADFI, but gain/feed decreased for pigs fed SBM with increasing concentrations of $Na_2SO_3$, and increased for pigs fed DEWS with increasing concentrations of $Na_2SO_3$ (SBM vs DEWS sulfite quadratic interaction, p<0.03). For d 13 to 35, pigs fed DEWS had greater ADG (p<0.01) and gain/feed (p<0.001) than pigs fed SBM. Also, ADFI decreased and gain/feed increased with increasing concentrations of $Na_2SO_3$ (linear effects, p<0.04 and 0.01, respectively). Overall, pigs fed the diets with DEWS had greater ADG and gain/feed than pigs fed SBM (p<0.003 and 0.002, respectively), and $Na_2SO_3$ tended to decrease ADFI and increase gain/feed (linear effects, p<0.07 and 0.06, respectively). In conclusion, pigs fed DEWS had greater rate and efficiency of gain than pigs fed SBM. Also, adding $Na_2SO_3$ prior to extrusion increased yield and feed efficiency.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.83-90
• /
• 1998

Stage transformation characteristics of Li, K and Na-graphite deintercalation compounds (GDICs) were studied under consideration of a deintercalation mechanism of the intercalants between carbon layers. Li-graphite intercalation compounds (GICs) synthesized by a controlling temperatures and pressures have been spontaneously decomposed in the atmosphere. By X-ray differaction analysis the $d_{001}$-values of stage 1 and 2 were identified to be 3.71 and 7.06 $\AA$, respectively. After 6 weeks, the deintercalation reaction of the Li-GICs ceased and only residual compounds could be observed. K-GICs were synthesized by the modified two-bulb method resulting in structural stabilities and stage transitions. By X-ray diffraction analysis the very stable K-graphite residue compounds were observed after 10 weeks. Na-GICs with stage 1 and 2 were synthesized using the high temperature and pressure technique. The temperature dependence of a deintercalation reaction and a thermal stability of Na-GICs were discussed. The structure changes of the Na-GDICs depending on heating rates were identified by X-ray diffraction. According to the deintercalation process, the stage transformations could be attributed to irregular deintercalations of the GDICs with disordered stage.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.66-73
• /
• 2021

The development of excellent high-energy materials has progressed in the direction of synthesizing compounds with high nitrogen content, ultimately oriented toward the form of polynitrogen. As cyclo-N₅^-, a type of polynitrogen, is synthesized as sodium pentazolate(NaN₅) and the results of various metal and non-metal compounds have been studied, the usage of polynitrogen compounds is attracting attention. However, since the known synthesis and purification method of NaN₅ are very extreme and complicated, it is essential to improve the process in order to increase the utility of the pentazolate compounds in the future. In this study, only a simple filtration method was applied to purify the NaN₅, and based on this, two non-metal pentazolate salt compounds were successfully synthesized.

• Journal of Mushroom
• /
• v.2 no.1
• /
• pp.4-9
• /
• 2004

This study was carried out to investigate effect of NaCl treatment on growth oyster mushroom and Trichoderma spp. on PDA and in rice straws. We also investigated the possibility of oyster mushroom cultivation using rice straw harvested from the reclaimed land having been drained sea water. Mycelial growth of oyster mushroom was increased by treatment of 0.2% NaCl but decreased by treatment of the higher concentration of NaCl. In the case of the mycelial growth on PDA of Trichoderma spp., no change was found in 0.5%~1.0% NaCl, but decreased in the range of 1.0%~3.0% NaCl and drastically decreased at 5.0% NaCl. In the rice straws treated with different concentration of NaCl solution, mycelial growth of oyster mushroom showed almost same result compare to PDA. The spore formation of Trichoderma mould was almost same in both 0% and 0.3% NaCl, decreased in 0.5% and was not found spores in the higher concentration of NaCl. As increasing salt concentration in the rice straws, the NaO contents were increased. The $K_2O$ contents were decreased before and after sterilization. The moisture content of rice straws showed no difference by treatment of 3.0% NaCl but decreased the moisture by treatment of 5.0% NaCl. No pH change was found in the rice straws treated with NaCl. Mushroom yield in the rice straw of reclaimed land was a little higher than that of normal paddy land straw. The duration of primordium formation was not affected by NaCl concentration in rice straws. The yield of fruiting body in 0.3% NaCl treatment was 2,700kg, which was almost same to non-treated plot, but decreased in 0.5% NaCl. EC value of soaking water after submerging rice straw was higher than before, but NaO content was not changed at both condition.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.6
• /
• pp.349-352
• /
• 1988

[(Benzene)Mn$(CO)_3$]$^+$ reacts with NaP(O) (OR)$_2$ (R = Me, Et, Ph) to give the phosphonate compound 1. Compound 1 reacts with R'Li (R = Me, Ph, $^nBu, ^tBu$) to yield the isomerized compound 2 and the alkylated compound 3. [(Toluene)Mn$(CO)_3$]$^+$ reacts with NaP(O)$(OMe)_2$ to give the phosphonate complexes 1-A and 1-B. Treatment of 1-A with $^tBuLi$ in THF affords complexes 3-A and 3-B with the later major. With 1-B only the complex 3-C is formed. [(Anisole)Mn$(CO)_3$]$^+$ reacts with NaP(O)$(OMe)_2$ to give the phosphate complex 1-C, which on treatment with $^tBuLi$ and then $H_2O$ yields compound 3-D. After demetallation of compound 3-D, meta-tertbutyl-anisole is obtained in a reasonable yield.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.178-182
• /
• 1985

The purpose of this study was to develop a separation method of Zn(II), Cu(II) and Mg(II), by ion exchange chromatography using cation exchange resion (Dowex 50w${\times}$8, 80-100 mesh) and anion exchange (Amberlite IRA-400). Ion exchange resions were packed into 25 ${\times}$ 2cm ID column and flow rate was controlled to 0.30 ml/min. Good eluents for separation of nonferrous metal ions such as Zn(II), Cu(II), Mg(II) were as follow: 0.5M $NaNO_3$ (pH 3.1), 0.2~0.5M HCl + 50~60% Acetone, and 1M HAc + 0.1M NaAcf(pH 3.7) aqueous solution. The mixed solution of 0.1M NaAc(pH 3.7), 0.5M HCl + 50% Acetone were found to be the best eluent for step elution. Analysis of metals were determined by atomic absorption spectrophotometer. In addition, separated Zn(II) fraction was obtained by eluted with 0.12N HCl and 1.5N $NH_4OH$ aqueous solution. This solution was titrated by the E. D. T. A.

• Journal of the Korean Mathematical Society
• /
• v.56 no.6
• /
• pp.1689-1701
• /
• 2019

Let ${\star}$ be a semistar operation on the integral domain D. In this paper, we prove that D is a $G-{\tilde{\star}}-GCD$ domain if and only if D[X] is a $G-{\star}_1-GCD$ domain if and only if the Nagata ring of D with respect to the semistar operation ${\tilde{\star}}$, $Na(D,{\star}_f)$ is a G-GCD domain if and only if $Na(D,{\star}_f)$ is a GCD domain, where ${\star}_1$ is the semistar operation on D[X] introduced by G. Picozza [12].