• Microbiology and Biotechnology Letters
• /
• v.27 no.2
• /
• pp.91-95
• /
• 1999

To investigate the effect of salts on the production of erythritol by Torula sp., cells were grown on the media containing various concentrations of KCl or NaCl. Cell growth and glucose consumption rates decreased when KCl or NaCl concentration increased from 0.0 to 0.5M. The production of erythritol, however, was maximal at 0.3M aCl. The erythritol concentration of 54.3g/l in the medium containing 0.3M NaCl and 200g/l glucose was obtained after 120h. The production of erythritol decreased in cultures above 0.3M NaCl or 0.4M KCl due to the inhibition of cell growth. To elucidate the effect of salts more quantitatively, KCl and NaCl concentrations were converted to osmotic pressure. As the osmotic pressure increased, the yield of erythritol from glucose increased regardless of the kinds of salts and the yield of erythritol was approximately 49% at the osmolality of 2.4Os/kg. When the osmotic pressure increased to 2.5Os/kg, the specific growth rate of cells decreased but the production rate of erythritol increased. For the effective production of erythritol, osmotic pressure must be adjusted not to inhibit markedly the growth rate of cells and to stimulate the production rate of erythritol by supplementing salt.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.335-340
• /
• 1998

This study was conducted to determine the morphological responses of barley seedlings to NaCl stress and to investigate histological changes of cells with transmission electron microscope(TEM) after NaCl stress. Plant height and root length of 10-day old barley seedlings with NaCl stress were reduced and inhibition level was found to be more severe in the plant height than in the root length. The leaf length, leaf width and leaf area were shorter as well with NaCl stress than without NaCl stress. However, there was no difference in the number of roots between NaCl treatments. The weight of dry matter decreased at higher NaCl concentrations, especially at 100mM NaCl. The water content of shoots tend to decrease at higher NaCl concentrations, but there was no difference in the water content of roots, The reduced sugar content was greatly increase than starch. Cellulose content was higher in NaCl stressed-plant than control, and tended to decreased at higher NaCl concentrations. Lignin content also decreased NaCl stressed-plant but there was no tendency at NaCl stress concentrations. Electric conductivity of cell sap with seedlings was high with NaCl stressed-plant. Amount of cell sap gradually increased with time in the roots than in the shoots, The grana of chloroplasts was changed by 150mM NaCl concentration. The christe of mitochondria in root meristematic sells ruined in structure and cell wall of leaf and root was also ruined by NaCl stress.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.317-323
• /
• 2010

This study aimed to examine a suppression effect of salinity on extension rate of stem elongation of cucumber seedlings (Cucumis sativus L.) grafted with roots of figleaf gourd plant. The effects of application methods, timings, and concentrations of two salt types, sodium chloride (NaCl) and calcium chloride ($CaCl_2$), were compared to untreated control plants. In result, an obvious suppression effect on the excessive elongation of stem was obtained by both sub-irrigated and medium-mixed NaCl salt. An improvement in quality of transplants was also obtained by the sub-irrigated NaCl salt. Foliar-applied NaCl caused visible leaf injury when the concentration was higher than 40 mM; but, with no effect on suppressing the stem elongation. When the NaCl was applied at 7 days after grafting, a higher concentration of NaCl was demanded for suppressing the stem elongation compared to an application at the day of grafting. No effect of the NaCl salt on the fresh weights of 36-day grown plants was observed; but, there was a negative effect on the number of female flowers at a high temperature season. Overall, the NaCl salt was more effective on slowing down the stem elongation and had the lower incidence of leaf injury than the $CaCl_2$ salt.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.253-259
• /
• 2000

The purpose of this study is to investigate the physicochemical characteristics of salinization of groundwater at the estern area of Cheju island. For this purpose, the major ions of groundwater, spring water are analyzed. The concentration of $Cl^-$ and Na^++K^+$/ contained in the groundwater at near the coastline are higher than those at inland area away from the coastline. The water quality components of groundwater observed at this area can be classified into 4 types such as Na-Cl, $HCO_3, Na-Cl-HCO_3$ and Ca-HCO$_3$. The concentration ratio of $SO_4^1 to Cl^- is 0.1354(R^2=0.972)$ at this area. This value is very similar with Dittomer's ratio of 0.13. For Na^+, K^+, and Mg^{2+}/ versus Cl^-$, their ratios also show a significant relationship between sea water and groundwater in this area. From the chloride-bicarbonate ratio, it can be estimated that the intrusion distance of seawater from coastline to inland area is 2.8km at Onpyung-Nansan, Sangdo and Pyungdae areas, and 5.4km at Kosung-Susan area. The mixing ratio between seawater and fresh water by the intrusion of seawater is decreased with the distance toward inland from coastline. This ratio(fresh water : seawater) is 80:20 in spring water adjacent the coastlines, Onpyung area and 99.8:0.2 in the well at No.3 of Susan located at inland away from the coastline. The concentration of $Na^+$ observed at field is 25~45% lower than that theoretically calculated by this mixing ratio. Based on the data of EC, the equipotential line of 500$\mu$mhos/cm is located at 4~5km poing at Kosung-Susan area and 2.5km point at the other area. The equation of correlation between $Cl^-$ concentration and EC values is $Cl^-$=0.1927EC-16.683 for the area lower than 500 $\mu$mhos/cm and $Cl^-$=0.2773EC for the area beyond 500 $\mu$mhos/cm.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.1
• /
• pp.72-79
• /
• 2008

This study investigated the changes in textural characteristics that occurred by adding maltose syrup, dextrin, and sucrose to whole egg gels, by assessing coagulation after cooling. It also examined the optimal NaCl and sucrose concentrations for whole egg gels sensory evaluations, and then studied how the addition of sucrose effected gel formation and textural characteristics under optimal NaCl concentration. The additions of maltose syrup, dextrin, and sucrose, presented some color changes. The greater the addition of maltose syrup or dextrin, the lower the L, a, and b values of the whole egg gel and whole egg liquid, and ultimately the color turned dark bluish green. With increasing additions of sucrose, maltose syrup, and dextrin, the viscosity of the whole egg liquid increased slightly. In terms of the mechanical texture characteristic of the gel, the texture was most elastic with the 0.8% addition of sucrose, and hardness decreased by increasing the ratio of added sucrose. Increasing amounts of maltose syrup resulted in less hardness and SF. And for dextrin, the SF increased up to 2.5 and then decreased, and hardness decreased with increasing amounts of dextrin. Based on sensory evaluations, the 0.8% addition of NaCl was significantly preferred(p<0.05), in terms of salty taste. The overall preference scores indicated that the whole egg gel made with 0.3% sucrose and the optimal NaCl concentration(0.8%) was most preferred, and each sample was significant(p<0.05). Under the optimal 0.8% NaCl concentration increasing the sucrose concentration resulted in a darker egg gel color, in terms the L value. SF, NF, and hardness, which are mechanical texture parameters, were when 0.8% sucrose and the optimal NaCl concentration of 0.8% were added to whole egg liquid, in preparing the whole egg gel.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.296-300
• /
• 2009

Generation of chlorine dioxide ($ClO_2$) was studied by the un-divided electrochemical cell system using $RuO_2$ anode material. Sodium chlorite ($NaClO_2$) was used as a precursor compound of chlorine dioxide. Effect of various operating parameters such as feed solution flow rate, initial solution pH, $NaClO_2$ and NaCl conc., and applied current density on the produced chlorine dioxide concentration and solution pH were investigated in un-divided electrochemical cell system. Produced chlorine dioxide concentration and solution pH were strongly depends on the initial solution pH and feed solution flow rate. Sodium chloride (NaCl) was not only good electrolyte, it was also used as a raw material of chlorine dioxide with $NaClO_2$. Observed optimum conditions were flow rate of feed solution (90 mL/min), initial pH (2.3), $NaClO_2$ concentration (4.7 mM), NaCl concentration (100 mM), and current density ($5A/dm^2$). Produced chlorine dioxide concentration was around 350 mg/L and solution pH was around 3.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.118-124
• /
• 2005

In this research, we examined the effect of NaCl on the growth, energy metabolism, and proton motive force of Halomonas salina, and the effect of compatible solutes on the bacterium growing in the high salinity environment. H. salina was isolated from seawater and identified by 16srDNA sequencing. The growth of H. salina was not enhanced by the addition of external compatible solutes (choline and betaine) in the high salinity environment. The resting cells of H. salina absorbed more glucose in the presence of 2.0 M NaCl than in its absence. H. salina did not grow in the medium with either KCl, RbCl, CsCl, $Na_2SO_4$, or $NaNO_3$, in place of NaCl. The optimal concentration of NaCl for the growth of H. salina ranged from 1.4 M to 2.5 M, and the growth yield was decreased in the presence of NaCl below 1.4M and above 2.5M. The activity of isocitrate dehydrogenase, pyruvate dehydrogenase, and malate dehydrogenase of H. salina was not inhibited by NaCl in in vitro test. The proton translocation of H. salina was detected in the presence of NaCl only. These results indicate that NaCl is absolutely required for the normal growth and energy metabolism of H. salina, but the bacterial growth is not enhanced by the compatible solutes added to the growth medium.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.312-317
• /
• 2019

The objective of this study was to investigate the corrosion behavior of aluminum (AA1100) in a mixed solution of 0 ~ 0.1 g/L Na₂S + 0.3 ~ 3 g/L NaCl + 0 ~ 10 mL/L H₂O₂. Potentiodynamic polarization tests were performed. Effects of solution compositions on corrosion potential, corrosion rate, and pitting potential of aluminum were statistically analyzed with a regression model. Results suggested that localized corrosion susceptibility of aluminum was increased in the solution with increasing concentration of NaCl because the pitting potential was lowered linearly with increasing NaCl concentration. On the contrary, H₂O₂ mitigated the galvanic corrosion of aluminum by increasing the corrosion potential. It also mitigated localized corrosion by increasing the pitting potential of aluminum. Na₂S did not exert a noticeable effect on the corrosion of aluminum. These effects of different chemical species at various concentrations were independent of each other. Synergy or offset effect was not observed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.12
• /
• pp.1002-1006
• /
• 2010

In this study, magnesium (Mg), zinc (Zn) and aluminium (Al) as anode electrode and the solution of NaCl dissolved with 2~20 wt% as electrolytes were used for the metal-air cell. The open circuit voltage, short circuit current and I-V characteristics upon different kinds of anode electrode and electrolyte concentration were investigated. The open circuit voltage, initially about 1.45 V, rises to 1.6 V during the first 10 minutes indicating the necessity of an induction time to activate the catalyst on the air cathode. The short circuit current increases with an increased concentration of NaCl, causes an increase in the conductivity of the electrolyte solution, but the open circuit voltage did not under undergo influence of electrolyte. From NaCl 20 wt% electrolyte, the maximum output power of the magnesium electrode materials was measured with 177mW. It is found that the power characteristics of metal-air cell could be improved by using magnesium electrode materials in the NaCl electrolyte.

• Journal of Environmental Science International
• /
• v.18 no.11
• /
• pp.1235-1245
• /
• 2009

The purpose of this study is to investigate electro-generation of free Cl, $ClO_2$, $H_2O_2$ and $O_3$ and degradation of Rhodamine B in solution using Ru-Sn-Sb electrode. Electrolysis was performed in one-compartment reactor using a dimensionally stable anode(DSA) of Ru-Sn-Sb/Ti as the working electrode. The effect of applied current (0.5-3 A), electrolyte type (NaCl, KCl, HCl, $Na_2SO_4$ and $H_2SO_4$) and concentration (0.5-2.5 g/L), air flow rate (0-3 L/min) and solution pH (3-11) was evaluated. Experimental results showed that concentration of 4 oxidants was increased with increase of applied current, however optimum current for RhB degradation was 2 A. The generated oxidant concentration and RhB degradation of the of Cl type-electrolyte was higher than that of the sulfate type. The oxidant concentration was increased with increase of NaCl concentration and optimum NaCl dosage for RhB degradation was 1.75 g/L. Optimum air flow rate for the oxidants generation and RhB degradation was 2 L/min. $ClO_2$ and $H_2O_2$ generation was decreased with the increase of pH, whereas free Cl and $O_3$ was not affected by pH. RhB degradation was increase with the pH decrease.