• 제목/요약/키워드: Na-pyrophosphate

검색결과 28건 처리시간 0.02초

중금속 오염 토양 정화를 위한 습식자력선별법 사용 시 최적 토양분산 조건 (Optimum Condition of Soil Dispersion for Remediating Heavy Metal-Contaminated Soils using Wet Magnetic Separation)

  • 전철민;박정식;박숙현;김재곤;남인현
    • 자원환경지질
    • /
    • 제45권2호
    • /
    • pp.121-135
    • /
    • 2012
  • 본 연구에서는 자력선별 토양정화기술 공정에 적합한 토양의 최적 분산 조건을 도출하기 위하여 토성이 다른 중금속 오염토양 2종의 시료(US, JIK)를 대상으로 분산특성 및 중금속 용출 특성을 파악하였다. 분산제로는 인산염(pyrophosphate, hexametaphosphate, orthophosphate), 계면활성제(sodium dodecyl sulfate, SDS)가 사용되었으며, pH = 9~12와 농도변화(1~200 mM)에 따른 토양입단의 분산특성 및 중금속 함량을 파악하고, 효율적인 분산조건을 도출하였다. 분산용액의 pH변화에 따른 토양분산 특성은 입도변화 결과를 통하여 파악할 수 있는데, 분산용액의 pH가 12에 가까워질수록 현탁액의 점토함량이 증가하였다. 이는 pH가 상승함에 따라 PZC(point of zero charge)이상의 pH가 유지되면서 점토입자들이 분산된 상태로 유지된 것으로 여겨진다. 농도변화에 따른 토양분산 실험 결과, 농도가 증가함에 따라서 높은 점토함량을 나타내었는데, 이는 산화철, 산화망간의 PZC보다 높은 분산용액의 pH조건과 분산제의 흡착에 기인한 것으로 판단된다. 토양입자의 분산에 따른 중금속 용출은 pyrophosphate, hexametaphosphate, orthophosphate는 50 mM 이상의 농도에서, SDS의 경우 100 mM이상의 농도에서 비소 용출량이 일정하게 나타났다. 또한, 분산용액의 pH가 증가함에 따라 비소 용출량도 증가하였다. 인산염은 비소와 유사한 화학구조를 지니고 있어 토양입자표면에서 흡착경쟁을 하여 비소의 탈착을 유발하고, 계면활성제는 토양입자표면에 흡착하여 비소가 탈착되는 것으로 파악된다. 분산용액에 따른 분산효과는 pyrophosphate > hexametaphosphate > SDS > orthophosphate의 순으로 나타났다. 결과적으로 분산효율 및 비소용출량을 고려한 최적의 토양분산용액 조건은 pH 11, 10 mM pyrophosphate로 판단된다. 이러한 결과들은 고구배 자력선별 기술을 이용한 토양정화 공정을 최적화하는데 활용될 수 있을 것으로 기대된다.

탈지조성에 따른 철강용 알칼리탈지제의 합성 및 특성 (Synthesis and Characteristics of Alkaline Degreasing Agents for Steel Containing Degreasing Components)

  • 박은석;정동진;박홍수;함현식
    • 한국응용과학기술학회지
    • /
    • 제20권2호
    • /
    • pp.81-86
    • /
    • 2003
  • To prepare alkaline degreasing agents(SADAs), tetrasodium pyrophosphate(TSPP), $Na_2CO_3$, Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate(303C), Demol C, and MJU-100A were blended. The prepared degreasing agents were tested with steel specimens and the results were as follows. The degreasing powers of SADA-6($Na_2CO_3$ 50g/TSPP 25g/T-701 10g/303C 15g/Demol C 12g/MJU-100A 8g/water 130g mixture) for press-rust preventing oil were 98% and 99% degreasing at 4wt%, 70 $^{\circ}C$ and 90 $^{\circ}C$, respectively; for quenching oil, the degreasing power of SADA-6 was 92% degreasing at 4wt% and 70 $^{\circ}C$. From these results, it was proved that the SADA-6 exhibits a good degreasing power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt% and 60 $^{\circ}C$ were 16mm and 40mm, respectively. SADA-6 was proved a good low foaming degreasing agent.

Triclinic Na3.12Co2.44(P2O7)2 as a High Redox Potential Cathode Material for Na-Ion Batteries

  • Ha, Kwang-Ho;Kwon, Mi-Sook;Lee, Kyu Tae
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권2호
    • /
    • pp.187-194
    • /
    • 2020
  • Two types of sodium cobalt pyrophosphates, triclinic Na3.12Co2.44(P2O7)2 and orthorhombic Na2CoP2O7, are compared as high-voltage cathode materials for Na-ion batteries. Na2CoP2O7 shows no electrochemical activity, delivering negligible capacity. In contrast, Na3.12Co2.44(P2O7)2 exhibits good electrochemical performance, such as high redox potential at ca. 4.3 V (vs. Na/Na+) and stable capacity retention over 50 cycles, although Na3.12Co2.44(P2O7)2 delivered approximately 40 mA h g-1. This is attributed to the fact that Na2CoP2O7 (~3.1 Å) has smaller diffusion channel size than Na3.12Co2.44(P2O7)2 (~4.2 Å). Moreover, the electrochemical performance of Na3.12Co2.44(P2O7)2 is examined using Na cells and Li cells. The overpotential of Na cells is smaller than that of Li cells. This is due to the fact that Na3.12Co2.44(P2O7)2 has a smaller charge transfer resistance and higher diffusivity for Na+ ions than Li+ ions. This implies that the large channel size of Na3.12Co2.44(P2O7)2 is more appropriate for Na+ ions than Li+ ions. Therefore, Na3.12Co2.44(P2O7)2 is considered a promising high-voltage cathode material for Na-ion batteries, if new electrolytes, which are stable above 4.5 V vs. Na/Na+, are introduced.

철강용 고성능 알칼리세정제의 제조 및 세정거동 (Preparation and Behavior of High Performance Alkaline Cleaning Agents for Steel)

  • 박홍수;조혜진;심일우;유혁재;김명수;함현식
    • 한국응용과학기술학회지
    • /
    • 제22권1호
    • /
    • pp.15-20
    • /
    • 2005
  • $Na_2CO_3$. Sodium orthosilicate (Na-OSi), Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate (303C), Newpol PE-68 (PE-68), MJU-100A, and tetrasodium pyrophosphate were blended to prepare high performance alkaline cleaning agents (ACASs). The results of cleaning test with steel specimen showed that ACAS-6 ($Na_2CO_3$ 50g/Na-OSi 35g/T-701 20g/303C 18g/PE-68 17g/MJU-100A 10g/TSPP 20g/ water 180g mixture) had a good cleaning power. The cleaning power for press-rust preventing oil was 98% and 99% degreasing at 4wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively ; for quenching oil, the cleaning power of ACAS-6 was 91% degreasing at 4wt% and $70^{\circ}C$. The foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt%, $60^{\circ}C$ were 18mm and 65mm, respectively. It was concluded that ACAS-6 had a good low foaming cleaning agent.

The Characteristic Study of Plasma Electrolytic Oxidation in AZ31B Magnesium Alloy

  • Yu, Jae-Yong;Choi, Soon-Don;Yu, Jae-In;Yun, Jae-Gon;Ko, Hoon;Jung, Yeon-Jae
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권4호
    • /
    • pp.1746-1751
    • /
    • 2015
  • In this study low voltage Plasma Electrolytic Oxidation (PEO) was utilized to eliminate high voltage PEO drawbacks such as high cost, dimensional deformation and porosity. Low voltage PEO produces a thin coating which causes low corrosion resistance. In order to solve such problem, 0.1~0.6M pyrophosphates were added in a bath containing 1.4M NaOH, and 0.35M Na2SiO3. 70 V PEO was conducted at 25℃ for 3 minutes. Chemical composition, morphology and corrosion resistance of the anodized coating were analyzed. The anodized film was composed of MgO, Mg2SiO4, and Mg2O7P2. The morphology of film showed appropriately dense structure and low porosity in the anodized layers. It is found that low voltage Plasma Electrolytic Oxidation in cooperation with phosphating treatment can provide a good corrosion protection for the AZ31B magnesium alloy.

Development of Reconstituted Embryos with Fetal Fibroblast Cells in Rabbit

  • J. G. Yoo;S. R. Cho;Lee, S. L.;J. M. Hwang;J. S. Bhak;E. H. Yea;Park, G. J.;Lee, H. J.;S. Y. Choe
    • 한국동물번식학회:학술대회논문집
    • /
    • 한국동물번식학회 2001년도 발생공학 국제심포지움 및 학술대회 발표자료집
    • /
    • pp.60-61
    • /
    • 2001
  • To produce reconstituted rabbit embryos with fetal fibroblasts, the present study was evaluated the efficiencies of the activation conditions as assessments of subsequent development and chromosome in the embryos. New Zealand White rabbits were used throughout the study. Fetal fibroblasts collected from 22-d of fetuses were cultured in DMEM+10% FBS in 5% CO₂ in air. The culture was maintained for 10 passages. In every passage half of cell suspension were kept in frozen. (omitted)

  • PDF

벤토나이트 유동성 개질제의 제조 및 특성 (Preparation and Characterization of Bentonite Rheology Modifiers)

  • 이석기;구광모;양경수;박성우;이병교
    • 한국세라믹학회지
    • /
    • 제39권11호
    • /
    • pp.1090-1096
    • /
    • 2002
  • 몬모릴로나이트군의 벤토나이트(BEN)와 첨가제로서 풀림제 및 음이온 계면활성제를 배합하여 6종의 수팽윤성 BEN 유동성 개질제(WSB-1~WSB-6)를 제조하였다. 제조한 WSB의 평균입경, 입자형태, 용액점도, 수팽윤성 및 첨가제에 따른 점도를 각각 측정하였고, WSB의 유동학적 거동을 레오메타를 이용하여 조사하였다. WSB-1의 점도는 pH가 낮을수록 BEN의 평균입경이 작을수록 각각 증가하였고, 풀림제로서 $Na_2CO_3$를 처리한 WSB-2의 점도가 가장 높게 나타났다. 이 결과는 WSB에 포함된 BEN 입자가 edge-to-face의 구조로 재배열이 일어나기 때문으로 해석할 수 있다. 또한 WSB에 풀림제 및 음이온 계면활성제가 포함된 WSB-4, WSB-5 및 WSB-6은 전단력에 따라 점도의 변화가 거의 없는 졸(sol)상으로 존재하지만, 음이온 계면활성제로서 Tetrasodium Pyrophosphate(TSPP)를 첨가한 WSB-3의 경우는 전단력에 따른 점도가 1000배의 차이가 남으로서 요변성(thixotropy)을 나타내었고, 이 결과로부터 TSPP의 음이온이 WSB-3에 포함된 BEN 입자의 edge에 배열된다고 설명할 수 있다.

5-fluorocytosine에 기질특이성을 가지는 cytosine deaminase의 특성 (Characterization of cytosine deaminase with substrate specificity to 5-fluorocytosine)

  • 이인;박찬영
    • 미생물학회지
    • /
    • 제26권3호
    • /
    • pp.207-214
    • /
    • 1988
  • A cytosine deaminase from the cell-free extract of an isolate was examined after ethyl alcohol reactionation. The enzyme catalyzed the conversion of 5-fluorocytosine to 5-fluorouracil by the possession of specificity to the substrate. The optimum temperature and storage time on the stability of the enzyme were at below $50^{\circ}C$ and near 2 days in tris-HCl buffer. The maximum activity was also presented ar 9.0 in pH and $45^{\circ}C$ in temperature. The pHs and temperatures for the enzyme activity ranged from 8.5-9.5 and from 40-$50^{\circ}C$, respectively. the presence of $Ag^{+}, Hg^{2+}, Zn^{2+}$ in the reaction mixture resulted in the marked inhibition in the activity, but 1mM of $Fe^{3+}, K^{+}$, or $Na^{+}$ increased the enzyme activity. The enzyme preparation was vot affected by inhibitors used except N-ethylmaleimide of 1 and 10mM, and considerably activated by 1mM of pyrophosphate and 10mM of phosphate.

  • PDF

분광법을 이용한 토양 유기물의 간이 측정 방법의 국내 적용 가능성 (Feasibility of a simple determination of soil organic matter content using spectrophotometric method in Korean soils)

  • 서영호;모영문;조병욱;강안석;정병찬;정영상
    • 한국토양비료학회지
    • /
    • 제43권6호
    • /
    • pp.1008-1011
    • /
    • 2010
  • A method currently used to determine soil organic matter (SOM), Tyurin method, is time consuming and expensive while accurate. Recently, a spectrophotometric determination was reported to be rapid, accurate, stable, easy to execute, and amendable to field use for soil samples obtained from Texas, USA. The objective of this study was to test if the spectrophotometric method is applicable to soils in Korea. Soil organic matter was extracted by 1 M HCl followed by a 0.25 M NaOH-0.1 M sodium pyrophosphate solution at a ratio of 1:250 soil:extractant. Soil organic matter determined by Tyurin method was linearly related to the value based on absorbance at 300 nm of the soil extracts with a coefficient of determination ($r^2$) of 0.81. Therefore, the result imply that this spectrophotometric method can be used to determine the soil organic matter of agricultural soils in Korea.