• YAKHAK HOEJI
• /
• v.40 no.1
• /
• pp.25-35
• /
• 1996

Magaldrate. an antiacid was synthesized by reacting magnesium oxide, aluminum sulfate, and dried aluminum hydroxide gel. The optimum synthesis conditions based on the yield of t he product were established by applying Box-Wilson experimental design. It was found that the optimum synthesis conditions of Magaldrate were as follows: Reaction temperature; 61~$85{\circ}C$, concentration of two reactants. Mgo and $Al(OH)_3$: 16~19.8%, molar concentration ratio of two reactants, [MgO]/[$Al(OH)_3$]; 4.2~5.0, temperature of washing water; 36~$41^{\circ}C$ and drying temperature of the product: 76~$80^{\circ}C$. Magaldrate was synthesized under the optimum synthesis conditions and identified by analyzing the chemical composition, and by differential scanning calorimetry and X-ray diffraction method. The Magaldrate sample synthesis under these conditions was used to prepare 15.6% Magaldrate original suspension which was utilized to make 13% Magaldrate suspension dispered in various concentrations of eight types of suspending agents. The acid-neutralizing capacity of 13% Magaldrate suspension dispersed in 0.25% suspending agents was examined by Rosset-Rice method. The maximum pH was reached within 1 minute in all suspension tested, and duration maintained between pH 3~5 was decreased in the order of Na alginate Na silicate(meta) Veegum HV pectin agar>Na>CMC>xanthan gum>bentonite. It was found that the hysteresis loop area was increased with temperature in the case of Riopan Plus and the addition of agar, whereas the area was decreased with temperature in the case of the addition of Na alginate and xanthan gum. 13% Magaldrate suspension tends to sediment by the addition of bentonite.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.477-481
• /
• 1998

Sea mustard paste was prepared by treating wet and dried sea mustard with 0.1M Na2CO3, which mainly aimed to extract alginate from the cell wall of sea mustard. The pastes were added to beef, chicken and pork to manufacture the meat patties. The effects of adding the paste were investigated in terms of sensory properties, texture(hardness)and weight changes after cooking. The sensory attributes such as taste, color, texture and juiciness were generally enhanced by adding the paste. The hardness of cooked patties was significantly decreased, so the paste provided softer texture. The addition of paste also resulted in decreasing the weight loss of meat patties after cooking.

• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.127-132
• /
• 1994

Removal of viscous materials, mainly alginate, from sea tangle extracts by $CaCl_2$ precipitation or ultrafiltration was investigated. The sea tangle extracts were prepared by enzymatic hydrolysis of polysaccharides followed by 2 hours of boiling in 1.5% NaCl or 2.0% sucrose solution. The $CaCl_2$ precipitation resulted in higher amount of total solid, amino-nitrogen and mannitol than those values of ultrafiltration, but protein extracted was less in the former. Both methods caused a significant decrease in the viscosity and turbidity of the extracts. The composition of four nucleotides showed that UMP and IMP were not detected in $CaCl_2$ precipitated extracts, while ultrafiltered extracts showed a fairly even distribution of them. Removal of viscous material, particularly ultrafiltration increased the glutamic acid in amino acid composition and reduced serine, histidine, lysine, glycine, phenylalanine and leucine.

• Preventive Nutrition and Food Science
• /
• v.2 no.1
• /
• pp.1-5
• /
• 1997

Solution Properties of polyelectrolytic biopolymers such as chitosen, pectin, alginate and etc. are significantly influenced by molecular weight and salt concentrations. The effect of NaCI concentration on the hydrodynamic properties of chitosan in dilute region was investigated for chitosans of varying molecular weight. Intrinsic vicosity([η]) of citosans with 5 different molecular weight was determined by glass capillary viscometer, and the viscosity average molecular weight was calculated using Mark-Houwink equation. Intrinsic viscosity decreased with increasing NaCI concentration for all chitosan samples, and it was proportional to the logarithmic NaCI concentration, i.e.,[η]∝log{TEX}$(C_{NaCl})^{$\alpha$}${/TEX}. Decreasing trend of[η] with NaCI concentration became more pronounced with increasing molecular weight. It was also found that the a values, indicating {TEX}$C_{NaCl}${/TEX} dependence of[η], were linearly correlated with the logarithmic molecular weight({TEX}$R^{2}${/TEX}=0.980). The chain stiffness parameters(B) were calculated by B=S./{TEX}$([η]_{0.1})^{1.32}${/TEX}, in which S was obtained from slope of [η] va {TEX}$I^{-1/2}${/TEX}. The B values of chitosan samples were determined to be 0.113~0071 with a average of 0.09.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.590-598
• /
• 2004

The preconcentration and determination of trace Cu(II) and Pb(II) on calcium alginate beads in aqueous solution were studied. A calcium alginate beads were prepared by adding an alginic acid to sample solution contained Ca(II). Some following conditions were optimized: the pH of sample solution, amount of alginic acid, and stirring time for effective adsorption; the type and concentration of acid, and sonication time in an ultrasonic vibrator for the perfect de-sorption. A sample solution was prepared with Cu(II) and Pb(II) in DI water. And Ca(II) and ethanol was added into the sample solution. The pH of the final sample solution was controlled with buffer solution. The alginic acid were dispersed in the sample solution by a magnetic stirrer. This mixture was stored in room temperature for 30 min to form a calcium alginate. After the beads were filtered and washed on a membrane filter, the analytes were redissolved from the beads by an ultrasonic vibration of 10 minutes in 1.0M $HNO_3$ solution. The effect of diverse ions on the adsorption of analytes were studied. This procedure was applied for the analysis of two real samples. The recoveries in spiked samples were $90.4{\sim}104.3%$ for analytes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1658-1664
• /
• 2006

The objective of this study was to investigate the effects of sodium alginate (SA) and pressurization levels on pH, water-binding and textural properties of pork muscle gels (PMG) containing salt. Ground lean pork with 1.0% NaCl and a given amount of SA (0.25, 0.5, 0.75 and 1.0%, respectively), was pressurized to 100, 200 or 300 MPa and subsequently gelled by heating. Results showed that addition of SA into pork muscle enhanced water-holding capacity (WHC) of PMG (p<0.05) as SA increased from 0.25% to 1.0%, with pH slightly increased (p>0.05). A decrease (p<0.05) was observed in all textural parameters (hardness, cohesiveness, springiness and chewiness). Pressurization had no effect on the tendency of WHC to increase or the decrease of the textural parameters. However, the effectiveness of pressurization to enhance textural properties of PMG was significant at some SA levels, especially ${\geq}200MPa$ and at ${\leq}0.75%$ SA levels. Different combinations of pressure and SA levels could bring about variation in textural properties of PMG while SA enhanced WHC of pork muscle. The multiformity of the texture will open up a wide range of technological possibilities for the manufacture of pork-based restructured low-fat products.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.636-652
• /
• 2018

The study aims to determine the optimum sterilization rate and water activity of Chinese traditional smoke-cured bacon product (Larou) in the preservation with natural coating solution. With the response surface methodology (RSM), we analyzed 3 factors of processing conditions (the concentration of lysozyme, concentration of sodium alginate, and concentration of chitosan) and 2 response factors (sterilization rate and water activity). Sterilization rate and water activity of Larou were largely affected by the concentration of lysozyme, concentration of sodium alginate, and concentration of chitosan. The final optimum concentrations of lysozyme, sodium alginate, and chitosan were 0.09, 1.40, and 1.60% and realized the high sterilization rate. Water activity of sliced Larou was significantly correlated with the sterilization rate. Low-field nuclear magnetic resonance analysis verified the optimum processing conditions. The coating resulted in 99.69% rate of reducing bacteria after 30-day storage. The data of the total number of colony, peroxidation value, moisture content, pH, and sensory evaluation provided the theoretical basis for extending the shelf life of Chinese traditional smoke-cured bacon product (Larou) with natural coating solution.

• Archives of Pharmacal Research
• /
• v.29 no.8
• /
• pp.707-711
• /
• 2006

Bifidobacteria-loaded alginate poly-l-lysine microparticles (bap microparticles) were prepared using an air atomization method and then freeze-dried. The viability of the bap microparticles was investigated as a function of the amount of the bifidobacteria cultures, and the addition of a yeast extract, cryoprotectants, antioxidants and neutralizer. The size of the bap microparticles with and without the bifidobacteria was $84.8{\pm}28.5\;{\mu}m$ ($mean{\pm}standard$ deviation) and $113.1{\pm}38.5\;{\mu}m$, respectively. The surface morphology was slightly ellipsoid and wrinkled regardless of the incorporating bifidobacteria. The viability gradually decreased with increasing freeze-drying time. Free-flowing powdered bap microparticles were obtained at least 12 h after freeze-drying the wetted slurry of bap microparticles. However, the particles tended to aggregate when either lactose or ascorbic acid was added. The addition of a yeast extract, cryoprotectants (glycerol and lactose), antioxidants ($NaHSO_3$ and ascorbic acid) and neutralizer $(Mg_3(PO_4)_2)$ resulted in a significantly higher viability of the bifidobacteria in the bap microparticles after freeze-drying (0.34-1.84 log) compared with the culture alone.

• Microbiology and Biotechnology Letters
• /
• v.19 no.4
• /
• pp.398-404
• /
• 1991

- Ethanol production by calcium alginate-immobilized baker's yeast was studied in the continuous shaked-flask reactor (CSFR) using glucose medium as a feed. Immobilized cells were stable at 30~$37^{\circ}C$ and pH 4~8. Fermentation characteristics of immobilized baker's yeast were examined changing the initial glucose concentration employed were 50, 100 and 150 g/l, respectively. It was investigated that the influent glucose concentration and the dilution rate have an influence on the ethanol fermentation characteristics at steady state in continuous culture of immobilized baker's yeast. The optimum conditions for high ethanol productivity and low residual glucose output in ethanol prodution were shown to be 0.2 h ' for the dilution rate and 150 g/l for the influent glucose concentration. The maximum ethanol productivity, ethanol yield, specific growth rate and glucose conversion rate were around 7.12 g/$l\cdot h$, 0.23, 0.366 g/$l\cdot h$ and 78.43, respectively.

• Food Science of Animal Resources
• /
• v.20 no.3
• /
• pp.199-206
• /
• 2000

축육 생산시 주요 부산물인 돼지 심장근으로부터 항산화제(0.02% propyl gallate, 0.2% asxorbic acid, 0.2% sodium tripolyphosphate) 첨가 세척액(25 mM phosphate buffer, pH 6.0)에 의해 제조된 surimi(5% protein 0.6 M NaCl, 25 mM phosphate buffer, pH 6.0)를 alginate(0.4%), calcium carbonate(0.075%) 및 lactate(0.6%) 등의 첨가에 의해 AC surimi 로 조제한 다음, CMC 또는 MC를 일정수준 (0.5%, 1.0%) 첨가하여 surimi 의 pH, 겔의 보수력과 조리 손실을 비롯하여 겔읨 루성을 비교 검톻였다. CMC 첨가시 pH는 0.2 단위씩 감소하는 경향을 보인데 비해 MC 첨가시에는 뚜렷한 변화를 보이지는 않았다. 조리 손실에 대한 영향을 살펴 본 결과 CMC와 MC 첨가구에서 0.5% CMC 첨가구를 제외하고서는 나머지 세 처리구에서 감소하는 경향이었고, 특히 MC 첨가시에는 대조구에 비해 뚜렷한 감소 경향을 나타내었으나(p<0.05) 첨가수준에 따른 차이는 나타나지 않았다 CMC나 MC의 첨가는 보수력에 대해서는 거의 영향을 미치지 않은 것으로 나타났고, 물성에 대한 측정 결과에서 CMC 첨가시에는 겔의 강도. 경도 및 탄성등은 약간 증가하였으나 유의적인 차이를 나타내지는 않았고 (P<0.05), MC 첨가시에는 뚜렷한 차이를 나타내지 않았으며, 겔 응집성에 대해서는 CMC와 MC 첨가에 의해 서로 다른 경향을 나타내었다.