• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.317-322
• /
• 2016

While PFOS sodium salt ($C_8F_{17}SO_3Na$) was not degraded by microorganisms for 28 days, the 4 alternatives were biodegraded at the rates of 21.6% for $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, 20.5% for $C_{15}F_9H_{21}S_2O_8Na_2$, 15.8% for $C_{23}F_{18}H_{28}S_2O_8Na_2$ and 6.4% for $C_{17}F_9H_{25}S_2O_8Na_2$, respectively. The acute toxicity test using Daphnia magna was conducted for 48 hours, the half effective concentration ($EC_{50}$) of PFOS sodium salt ($C_8F_{17}SO_3Na$) was evaluated in 54.5 mg/L. While the 4 alternatives did not show any effect at 500.0 mg/L. The surface tension of the PFOS salt ($C_8F_{17}SO_3Na$) is 46.2 mN/m at a concentration of 500.0 mg/L. While the surface tension of the 4 alternatives was found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$). The surface tension of $C_{23}F_{18}H_{28}S_2O_8Na_2$ (20.9 mN/m) has the lowest, followed by $C_{15}F_9H_{21}S_2O_8Na_2$ (23.4 mN/m), $C_{17}F_9H_{25}S_2O_8Na_2$ (27.3 mN/m), $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ (28.2 mN/m). The four kinds of alternatives ($C_{15}F_9H_{21}S_2O_8Na_2$, $C_{17}F_9H_{25}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$, $C_{25}F_{17}H_{32}S_3O_{13}Na_3$) were found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$) in terms of biodegradation, Daphnia sp. acute toxicity and surface tension, and thus they were considered applicable as PFOS alternatives. Especially biodegradation rate of $C_{15}F_9H_{21}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$ and $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ was relatively high as 15.8~21.6%, and Daphnia sp. acute toxicity and surface tension were considerably superior (surface tension 39~55%) to PFOS sodium salt. Therefore, these alternatives are considered to be available as an alternative of PFOS.

• The Korean Journal of Pharmacology
• /
• v.26 no.1
• /
• pp.35-49
• /
• 1990

A highly purified $(Na^+,\;K^+)-ATPase$ from the rectal gland of Squalus acanthias and from the electric organ of Electrophorus electricus has been used to raise antibodies in rabbits. The 97,000 dalton catalytic subunit and glycoprotein derived from the rectal gland of spiny shark were also used as antigens. The two $(Na^+,\;K^+)-ATPase$ holoenzymes and the two shark subunits were antigenic. In Ouchterlony double diffusion experiments, these antibodies formed precipitation bands with their antigens. Antibodies prepared against the two subunits of shark holoenzyme also formed precipitation bands with their antigens and shark holoenzyme, but not with eel holoenzyme. These observations are in good agreement with inhibitory effect of these antibodies on the catalytic activity of $(Na^+,\;K^+)-ATPase$ both from the shark and the eel, since there is very little cross-reaction between the shark anticatalytic subunit antibodies and the eel holoenzyme. The maximum antibodies titer of the anticatalytic subunit antibodies is found to be 6 weeks after the initial single exposure to this antigen. Multiple injections of the antigen increased the antibody titer. However, the time required to produce the maximum antibody titer was approximately the same. These antibodies also inhibit catalytic activity of $(Na^+,\;K^+)-ATPase$ vesicles reconstituted by a slow dialysis of cholate after solubilization of the enzyme in a presonicated mixture of cholate and phospholipid. In these reconstituted $(Na^+,\;K^+)-ATPase$ vesicles, effects of these antibodies on the fluxes of $Na^+$, $Rb^+$, and $K^+$ were investigated. Control or preimmune serum had no effect on the influx of $^{22}Na^+$ or the efflux of $^{86}Rb^+$. Immunized sera against the shark $(Na^+,\;K^+)-ATPase$ holoenzyme, its glycoprotein or catalytic subunit did inhibit the influx of $^{22}Na^+$ and the efflux of $^{86}Rb^+$. It was also demonstrated that these antibodies inhibit the coupled counter-transport of $Na^+$ and $K^+$ as studied by means of dual labeling experiments. However, this inhibitory effect of the antibodies on transport of ions in the $(Na^+,\;K^+)-ATPase$ vesicles is manifested only on the portion of energy and temperature dependent alkali metal fluxes, not on the portion of ATP and ouabain insensitive ion movement. Simultaneous determination of effects of the antibodies on ion fluxes and vesicular catalytic activity indicates that an inhibition of active ion transport in reconstituted $(Na^+,\;K^+)-ATPase$ vesicles appears to be due to the inhibitory action of the antibodies on the enzymatic activity of $(Na^+,\;K^+)-ATPase$ molecules incorporated in the vesicles. These findings that the inhibitory effects of the antibodies specific to $(Na^+,\;K^+)-ATPase$ or to its subunits on ATP and temperature sensitive monovalent cation transport in parallel with the inhibitory effect of vesicular catalytic activity by these antibodies provide direct evidence that $(Na^+,\;K^+)-ATPase$ is the molecular machinery of active cation transport in this reconstituted $(Na^+,\;K^+)-ATPase$ vesicular system.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.57-65
• /
• 2008

The behavior of Na-A type zeolite formed in hydrothermal synthesis of melting slag from municipal incineration ash has been investigated with varying synthesis time and $SiO_2/Al_2O_3$ ratio. Sodium silicate and sodium aluminate feed was found to initially form nuclei of Na-A type zeolite in the behavioral study of the reaction products with different synthesis times. As the synthesis time increased, the nuclei have grown to Na-A type zeolite crystals by reacting with $SiO_2$ and $Al_2O_3$ dissolved from the melting slag. The hydrothermal synthesis was completed in 10 hr in the $SiO_2/Al_2O_3$ ratio of 1.38 and after that time, the Na-A type zeolite formed was dissolved and transformed into hydroxysodalite. Only Na-A type zeolite was formed in the $SiO_2/Al_2O_3$ ratio ranging 0.80 to 1.96, whereas Na-P type zeolite as well as Na-A type was formed in the $SiO_2/Al2O_3$ ratio of 2.54.

• Korean Journal of Microbiology
• /
• v.44 no.2
• /
• pp.122-129
• /
• 2008

The purpose of this work was to investigate the synergically bactericidal effects and cellular responses of green tea polyphenols (TPPs) and nalidixic acid (NA) on nalidixic acid-resistant (NAR) Salmonella typhimurium. The bactericidal activities of $>3,500{\mu}g/ml$ TPPs and $<256{\mu}g/ml$ NA were investigated for S. typhimurium of which initial cell number was approximately adjusted to 107 cell/ml. Complete elimination of NAS-S. typhimurium was achieved within 6 hr of incubation at the concentrations of $3,500{\mu}g/ml$ TPP or $256{\mu}g/ml$ NA, whereas only partial bactericidal effect was achieved under the same conditions. However, the combinations of $3,000{\mu}g/ml$ TPPs and $32{\mu}g/ml$ NA against NAS-S. typhimurium and $3,500{\mu}g/ml$ TPPs and $64{\mu}g/ml$ nalidixic acid against NAR-S. typhimurium showed complete removal within 5 hr of incubation. The stress shock proteins (SSPs) were induced at different concentrations of TPP o rNA used as stressors against cell culture of S. typhimurium. The proteins were identified as 70-kDa DnaK and 60-kDa GroEL by SDS-PAGE and Western blot. SSPs induced by the stressors were found to increase in proportion to the TPPs or NA. Scanning electron microscopy analyses revealed the presence of perforations and irregular rod shape with wrinkled surfaces for cells treated with TPPs or NA.

• Korean Journal of Food Science and Technology
• /
• v.40 no.5
• /
• pp.534-539
• /
• 2008

The purpose of this study was to demonstrate the inhibitory action and quality-improvement functions of sweetness inhibitor, Na$\pm$2-(4-Methoxyphenoxy) propanoate (Na-PMP) in pound cakes. Na-PMP was first used to evaluate the intensity of sweetness in different concentrations of sucrose and fructose solutions: Na-PMP (250 and 500 ppm) was added to the model solutions of 2.5, 5.0, 7.5, and 10% sucrose and the equi-sweetness levels of fructose with the sucrose solutions. Both concentrations of Na-PMP significantly modified the sweetness intensity for both model solutions. For practical application of Na-PMP, different levels of sucrose (10, 20, and 30%) were added to the basic recipe (a control) of pound cake preparation. Excessive sweetness due to the addition of high levels of sucrose to the basic recipe was modified by the addition of Na-PMP, which resulted in equi-sweetness as the control (p<0.05). Moreover, Na-PMP improved the texture and shelf-life of the pound cake.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.97-104
• /
• 2006

This study was conducted to investigate effect of temperature and NaCl on the seed germination and water absorption of Thuja orientalis. Seeds were treated with 0, 500, 1,000, 2,000 and 4,000ppm of NaCl and placed in different chambers at 15, 20, 25 and $30^{\circ}C$, respectively. And seed properties and relative water absorptions were analyzed. Germination decreased with the increase of both temperature and NaCl concentration, and especially the difference was obvious at $30^{\circ}C$. Dormancy and mortality increased with the increase of temperature in non-NaCl treatment. Two-way analysis of variance showed significant effects of temperature, NaCl concentration and interaction between temperature and NaCl concentration (p<0.001). Mean germination time increased with the increase of NaCl concentration at 15, 20 and $25^{\circ}C$ but decreased at $30^{\circ}C$ because the seeds were mortal by NaCl high concentration, Germination speed and germination performance index decreased with the increase of NaCl concentration. Those represented decreasing tendency with NaCl concentration but high positive correlation with germination. Relative water absorption decreased with the increase of NaCl concentration and represented high values at $15^{\circ}C$, and showed high positive correlations with germination, germination speed and germination performance index. It was reported that the high temperature and salinity were inhibitive factors of seed germination of Thuja orientalis.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.135-139
• /
• 2016

We developed a liquid-liquid extraction method using an inorganic salt to dramatically improve the recovery efficiency of the anticancer agent paclitaxel from plant cell cultures. As a result of liquid-liquid extraction using a diverse types of inorganic salt (NaCl, KCl, $K_2HPO_4$, $NaH_2PO_4$, $NaH_2PO_4{\cdot}2H_2O$), NaCl gave the highest yield (~96%) and lowest partition coefficient (0.053) of paclitaxel. The optimal NaCl/solvent ratio, methylene chloride/MeOH ratio, and pure paclitaxel content for liquid-liquid extraction using NaCl were 1% (w/v), 26% (v/v), and 0.066% (w/v), respectively. Under the optimal conditions developed in the present method, most of the paclitaxel (~96%) was recovered from biomass by a single extraction step. In addition, this method facilitated 3-fold higher recovery efficiency of paclitaxel in a shorter extraction number than the conventional liquid-liquid extraction method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.52-52
• /
• 2010

CIS(CuInSe2)계 화합물 태양전지는 높은 광흡수계수와 열적 안정성으로 고효율 태양전지 제조가 가능하여 태양전지용 광흡수층으로 매우 이상적이다. 미국 NREL에서는 이러한 CIGS 태양전지를 Co-evaporation 방법으로 제조 20%이상의 에너지 변환 효율을 달성하였다고 보고하였다. CIGS 태양전지의 경우 기존의 유리 기판 대신 유연한 철강 기판을 사용해 태양전지를 flexible하게 제조 할 수 있다는 장점이 있다. 이러한 flexible 태양전지의 경우 기존의 rigid 태양전지의 적용분야 뿐만 아니라 BIPV, 선박, 장난감, 군용, 자동차등 더욱더 많은 분야에 활용이 가능하다. 하지만 flexible 태양전지에 사용되는 철강기판의 경우 기존의 유리 기판인 SLG에 함유되어 있는 Na이 첨가되어 있지 않아 별도의 Na 첨가가 필요하다. Na은 CIGS 광흡수층의 결정을 증가 시키며 태양전지의 전기적 특성을 향상시킨다. 이러한 Na이 없는 경우 효율이 감소한다. 따라서 flexible 태양전지 개발을 위해서는 Na 첨가에 대한 연구가 필수적이다. 본 연구에서는 Na의 증착 순서를 변화시켜서 CIGS 증착 전, 동시증착, CIGS 증착 후로 나누어 CIGS 광흡수층 결정성의 변화를 알아보고자 한다. Na의 두께를 5nm에서 500nm 까지 단계 별로 나누어 실험을 실시하였다. 이때 CIGS 광흡수층은 미국의 NREL과 같은 3 stage 방식을 이용하였다. 1st stage의 시간은 15분으로 고정하였으며 기판온도는 약 $300^{\circ}C$로 고정 하였다. 2nd stage는 실시간 온도 감지 장치를 이용하여 Cu와 In+Ga의 조성비가 1:1이 되는 시간을 기준으로 Cu의 조성을 30%더 높게 조절하였으며 기판 온도는 약 $640^{\circ}C$로 고정 후 실험을 실시하였다. 3rd stage의 경우 Cu poor 조성으로 조절하기 위해 모든 조건을 10분으로 고정 후 실험을 실시하였다. 기판은 Na의 영향만을 비교하기위하여 Na이 첨가되어있지 않은 corning glass를 사용하였다. 후면 전극으로 약 $1{\mu}m$ 두께의 Mo을 DC Sputtering 방법을 이용하여 증착 하였다. 각각의 Na 두께에 따른 CIGS 광흡수층의 특성을 분석하기 위해 FE-SEM, XRD 분석을 실시하였다.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.1-8
• /
• 2013

PURPOSES : This study is to evaluate the feasibility of using the alkali activated cement concrete for application of partial-depth repair in pavement. METHODS : This study analyzes the compressive strength of alkali activated cement mortar based on the changes in the amount/type/composition of binder(portland cement, fly ash, slag) and activator(NaOH, $Na_2SiO_3$, $Na_2CO_3$, $Na_2SO_4$). The mixture design is divided in case I of adding one kind-activator and case II of adding two kind-activators. RESULTS : The results of case I show that $Na_2SO_4$ based mixture has superior the long-term strength when compared to other mixtures, and that $Na_2CO_3$ based mixture has superior the early strength when compared to other mixtures. But the mixtures of case I is difficult to apply in the material for early-opening-to-traffic, because the strength of all mixtures isn't meet the criterion of traffic-opening. The results of case II show that NaOH-$Na_2SiO_3$ based mixtures has superior the early/long-term strength when compared to NaOH-$Na_2SiO_3$ based mixtures. In particular, the NaOH-$Na_2SiO_3$ based some mixtures turned out to pass the reference strength(1-day) of 21MPa as required for traffic-opening. CONCLUSIONS : With these results, it could be concluded that NaOH-$Na_2SiO_3$ based mixtures can be used as the material of pavement repair.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.1
• /
• pp.125-132
• /
• 2001

This study was carried out to investigate the effect of multi or single application of fluoride plus 0.05% NaF solution on the remineralization of dental caries lesion. The microhardness changes of enamel surface were measured after application of fluoride and precipitation of 0.05% NaF solution on 6 groups of cow's tooth on which the artificial carious lesions were formed first. Test groups were calssified into two step application with NaF, $SnF_2$ and APF under different application time conditions plus 0.05% NaF solution(group I, II, III, IV) and single application with APF plus 0.05% NaF solution (group V) and control(0.05% NaF solution only, group IV). The obtained results were as follows. 1. Regarding microhardness change of enamel surface. microhardness increments in group I(NaF for 1 minute+APF for 3 minutes+0.05% NaF solution for 1 minute), II($SnF_2$ 1 min+APF 3 min+NaF sol.), III($SnF_2$ 2 min+APF 2 min+NaF sol.), IV(NaF 2 min+APF 2 min+NaF sol.) and V(APF 4 min+NaF sol.) were significantly greater than group VI.(P<0.05) 2. Microhardness changes of shorter application time of $SnF_2$ (group II) were significantly greater than group III. (P<0.05) 3. Microhardness changes were variable with kinds of fluoride, application sequence and application time of fluoride. but had no relation with the number of fluoride application.