• Title/Summary/Keyword: NTCR

Search Result 26, Processing Time 0.024 seconds

A Routing Scheme by Normalized Transmission Characteristics (NTCR) for Multi-Carrier MANETs at Sea (다중캐리어 해상 MANET을 위한 정규화된 전송특성에 의한 경로배정방식)

  • Son, Joo-Young
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.35 no.8
    • /
    • pp.1092-1097
    • /
    • 2011
  • Data communications at sea are done by the traditional radio and satellite carriers. Because of the restrictions on the data rate and cost of the carriers, a novel data communication system at sea is needed. Nowadays the efforts to make use of the broadband land carriers at sea have been pursued. This paper proposes a routing scheme (NTCR) using the various carriers on land for a MANET model at sea. The NTCR scheme optimizes the route using a chosen carrier by taking considerations of normalized transmission characteristics (NTC) of applications and carriers. The NTCR scheme is compared with the MWR (max-win based routing) scheme.

Micro-structure and NTCR Characteristics of Copper Manganite Thin Films Fabricated by MOD Process (MOD법으로 제조된 Copper Manganite 박막의 구조 및 NTCR 특성)

  • Lee, Kui Woong;Jeon, Chang Jun;Jeong, Young Hun;Yun, Ji Sun;Nam, Joong Hee;Cho, Jeong Ho;Paik, Jong Hoo;Yoon, Jong-Won
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.27 no.7
    • /
    • pp.452-457
    • /
    • 2014
  • Copper manganite thin films were fabricated on $SiN_x/Si$ substrate by metal organic decomposition (MOD) process. They were burned-out at $400^{\circ}C$ and annealed at various temperatures ($400{\sim}800^{\circ}C$) for 1h in ambient atmosphere. Their micro-structure and negative temperature coefficient of resistance (NTCR) characteristics were analyzed for micro-bolometer application. The copper manganite film with a cubic spinel structure was well developed at $500^{\circ}C$ which confirmed by XRD and HRTEM analysis. It showed a low resistivity ($47.5{\Omega}{\cdot}cm$) at room temperature and high NTCR characteristics of $-4.12%/^{\circ}C$ and $-2.15%/^{\circ}C$ at room temperature and $85^{\circ}C$, implying a good thin film for micro-bolometer application. Furthermore, its crystallinity was enhanced with increasing temperature to $600^{\circ}C$. However, the appearance of secondary phase at temperatures higher than $600^{\circ}C$ lead to deteriorate the NTCR characteristics.

A Routing Scheme based on Normalized Location and Transmission Characteristics (NLTCR) for Multi-Carrier MANETs at Sea (다중캐리어 해상자율망을 위한 위치와 전송특성 정규값 기반 경로배정방식)

  • Son, Joo-Young
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.36 no.2
    • /
    • pp.302-308
    • /
    • 2012
  • Self-configuration network model is to overcome the limits of data communications at sea. As a research for enhancing the connectivity and scalability of data networks at sea using the diversity and heterogeneity of the data networks on land, in this paper, a routing scheme (NLTCR) based on not conventional hop counts but distances to destination ships is introduced. The NLTCR seeks an optimal route by normalized distances to a destination, and transmission characteristics of applications and carriers. Performance is evaluated and compared with those of the max-win (MWR) and the normalized transmission characteristics (NTCR) based schemes.

Electrical Conductive Mechanism of Hot-pressed $\alpha-SiC-ZrB_2$ Composites (고온가압소결한 $\alpha-SiC-ZrB_2$ 복합체의 전기전도기구)

  • Shin, Yong-Deok;Ju, Jin-Young;Kwon, Ju-Sung
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.48 no.2
    • /
    • pp.104-108
    • /
    • 1999
  • The electrical conductive mechanism and temperature dependence of electrical resistivity of $\alpha-SiC-ZrB_2$ composites with $ZrB_2$ contents were investigated. The electrical resistivity of hot-pressed composites was measured by the Pauw method form $25^{\circ} to 700^{\circ}C$. The electrical resistivity of the composites follow the electrical conduction model for a homogeneous mixture of two kind of particles with different conductivity. Also, the electrical resistivity versus temperature curves indicate the formation of local chains of $ZrB_2$ particles. In case of $\alpha-SiC-ZrB_2$ composites containing above 39vol.% $ZrB_2$ showed positive temperature coefficient resistance(PTCR), whereas the electrical resistivity of $\alpha-SiC-21vol.% ZrB_2$ showed negative temperature coefficient resistance(NTCR).

  • PDF

TCR Adjustment of $ RuO_2$ Thick Film Resistor by Semiconducting Oxides (반도성 산화물에 의한 $ RuO_2$ 후막저항체의 TCR조정)

  • Lee, Byung-Soo;Lee, Joon
    • Korean Journal of Materials Research
    • /
    • v.2 no.1
    • /
    • pp.58-64
    • /
    • 1992
  • TCR modifying oxides which have negative TCR were added to the $\textrm{RuO}_2$ thick film resistors and how they affect the TCR and resistivity of the systems were investigated. Two types of resistor systems whose ratio of $\textrm{RuO}_2$ to glass were 20/80 and 12/88 were used as standard resistors. It was observed that the modifiers did not always lower the TCR of the resistors and the direction of the TCR change were different from system to system. It was confirmed, however, that the feasibility of optimization of TCR of the resistors. When more than two TCR modifiers were added simultaneously there was no interaction between them. The resultant TCR of the resistor wart just sum of the effects from individual modifier. It was found to be desirable that the amount of addition of the TCR modifiers should be less than 2 to 3 percent.

  • PDF

PTCR Characteristics of Multifunctional Polymeric Nano Composites (PTCR 나노 복합기능 소재의 전류 차단 특성 연구)

  • 김재철;박기헌;서수정;이영관;이성재
    • Polymer(Korea)
    • /
    • v.26 no.3
    • /
    • pp.367-374
    • /
    • 2002
  • Electrical characteristics of crystalline polymer composites filled with nano-sized carbon black particle were studied. The developed composite system exhibited a typical positive temperature coefficient resistance (PTCR) characteristic, where the electrical resistance sharply increased at a specific temperature. The PTCR effect was sometimes followed by a negative temperature coefficient resistance (NTCR) feature with temperature, which seemingly caused by the coagulation of nano-sized carbon black particles in the excessive quantity. The PTCR temperature was controlled by the carbon black content and the external voltage. The change of electric conductivity was shown as a function of carbon black content, and the resistance was constant when the carbon black content was over 20 wt%. The room-temperature resistance was maintained by a repeated heating and cooling. The excellent PTCR characteristic was demonstrated by the low resistance in the initial stage and the instantaneous heating capability.

Effect of TiB$_2$on Properties of SiC Electroconductive Ceramic Composites (SiC 전도성 세라믹 복합체의 특성에 미치는 TiB$_2$의 영향)

  • Sin, Yong-Deok;Park, Mi-Rim;So, Byeong-Mun;Lee, Dong-Mun
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.51 no.4
    • /
    • pp.141-146
    • /
    • 2002
  • The mechanical and electrical properties of the pressureless sintered SiC-TiB$_2$electroconductive ceramic composites were investigated as functions of the transition metal of TiB$_2$. The result of phase analysis for the SiC-TiB$_2$ composites by XRD revealed $\alpha$-SiC(6H), TiB$_2$, and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phases. The relative density showed the lowest 84.8% for the SiC-TiB$_2$composites added with 39vol.%TiB$_2$. Owing to crack deflection, crack bridging and YAG of fracture toughness mechanism, the fracture toughness showed the highest value of 7.8 MPa.m$^{1}$2/ for composites added with 39vol.%TiB$_2$under a pressureless annealing at room temperature. The electrical resistivity of the SiC-27vol.%TiB$_2$ composites was negative temperature coefficient resistance(NTCR), and the electrical resistivity of the besides SiC-27vol.%TiB$_2$composites was all positive temperature coefficient resistance(PCTR) in the temperature range of $25^{\circ}C$ to $700^{\circ}C$.EX>.

An Investigation on the Dielectric and Microwave Properties of Ag(Ta,Nb)O3 Thick Films on the Alumina Substrates (알루미나 기판에 스크린 프린팅된 Ag(Ta,Nb)O3 후막의 유전특성 및 초고주파 특성에 대한 연구)

  • Lee, Ku-Tak;Koh, Jung-Hyuk
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.11
    • /
    • pp.925-928
    • /
    • 2011
  • Perovskite niobates and tantalates have been placed on a short list of functional materials for future technologies. This article was investigated ferroelectric materials $Ag(Ta,Nb)O_3$ thick film. In this study, we have fabricated the $Ag(Ta,Nb)O_3$ thick film on the $Al_2O_3$ substrates by screen printing method. The $Ag(Ta,Nb)O_3$ thick film were fabricated by the mixed oxide method. The sintering temperature and time were 1,150$^{\circ}C$, 2 hr. The electrical properties of $Ag(Ta,Nb)O_3$ thick film were investigated at 30~100$^{\circ}C$.

Electrical Conduction Mechanism of SiC-$ZrB_2$ Composites (SiC-$ZrB_2$계(係) 복합체(複合體)의 전기전도기구(電氣傳導機溝))

  • Ju, Jin-Young;Kwon, Ju-Sung;Shin, Yong-Deok
    • Proceedings of the KIEE Conference
    • /
    • 1997.07d
    • /
    • pp.1336-1338
    • /
    • 1997
  • Relations between the composites of SiC-$ZrB_2$ electro-conductive ceramic composites and their electrical resistivity, as well as their temperature, were investigated. The electrical resistivity of hot-pressed composites was measured by the Pauw method in the temperature of RT to $100^{\circ}C$. The electrical resistivity of the composites follow the electrical conduction model for a homogenous mixture of two kinds of particles with different conductivity. Also the electrical resistivity versus temperature curves indicate the formation of local chains of $ZrB_2$ particles. In the case of SiC-$ZrB_2$ composites containing above 30Vol.% $ZrB_2$ showed PTCR, whereas the electrical resistivity of SiC-15Vol.% $ZrB_2$ showed NTCR.

  • PDF