• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.97-103
• /
• 2002

In this paper, a Logarithmic Video Amplifier(LVA) for radar system or satellite communications is described. The proposed LVA is composed of a input stage, amplification stage, and output stage. As well as a novel series-parallel architecture is proposed for the purpose of wide dynamic range and high speed operation, a newly developed input stage is designed in order to control the voltage level between LVA and detector diode. The LVA is fabricated with a 1.5um 2-poly 2-metal n-well Bi-CMOS technology, and the chip area is 1310 um x 1540 um. From the experimental results, it consumes 190 mW at 10V power supply, the chip has 60 dB dynamic range and 100ns falling time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.8
• /
• pp.499-509
• /
• 2014

In this paper, we propose that a FDL(Freeze DeadLine) Algorithm to solve handover problems in heterogeneous wireless networks. Many previous studies concentrated on low level layer to solve handover problems. In this paper, however, we concentrate on high level handover problems such as network layer and transport layer. We analyze handover's problems of transport layer in Heterogeneous wireless network, propose the FLD algorithm for better performance than others studies. The Proposed method is analyzed by theoretical frames and we verify that the propose method using the NS-2(Network Simulation - 2).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.817-823
• /
• 2013

This paper examined the performance of differentiated services applied to each different traffic. For this purpose, we used three traffics which have a different quality of service and generate packets from a specific source to destination. To allocate a proper code point according to QoS, a common policy which is the simple policy model of time sliding window with 3 color marking (TSW3CM) was established to each traffic. To evaluate the performance, we investigate and compare code points to each traffic. Simulation results using NS-2 showed that the code points 10, 11, and 12 can be differently allocated to each traffic according to its sending rates 1Mbps, 2.5Mbps, and 4Mbps.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.365-372
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point(AP) when they are running in low power mode. In case of missing beacon due to noise or traffic from neighboring wireless network stations must be awake until they get the next beacon, which causes energy consumption in stations. In this paper, we propose a scheme searching next beacon consuming little energy. The problems of missing beacon in low power mode of IEEE 802.11b wireless interface are described and a new method to reduce energy consumption is proposed. The proposed method is simulated with the network simulator, ns2, and compared with the low power mode of the IEEE 802.11b. The result measured in terms of station's wakeup time shows some enhancement in energy consumption when some errors occur in receiving frames.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.529-538
• /
• 2007

In this paper, we have analyzed a simulation model of Slammer worm propagation process which caused serious disruptions on the Internet in the year of 2003 by using NS-2. Previously we had presented and analyzed Abstract Network to Abstract Network(AN-AN) model being modified from the Detailed Network to Abstract Network(DN-AN) of NS-2. However, packet analysis in AN-AN model had a problem of taking 240 hours to simulate the initial 300 seconds of infection. We have reduced the AN-AN model to save the simulation time and analyzed total 3.5 hours of the network congestions within 107 hours. Moreover, we have derived optimal quarantine rate of 0.0022 considering service outage of network devices caused by the heavy infected traffics, which was not taken into consideration in previous works. As the result of simulation, Although the inbound traffic at the Korean international gateway was back in normal conditions at 4,787 second, due to the revese direction saturation was maintained until 12,600 seconds, the service outage was persisted for 3.5 hours.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.790-794
• /
• 2008

Nucleophilic addition reaction of benzenethiols (PhSH) to 1-(2-nitrovinyl) benzenes ($\beta$ NS) in the presence of triethylamine (TEA) has been studied in acetonitrile at 25 ${^{\circ}C}$. The rate is first order with respect to [PhSH], [TEA] and [$\beta$ NS]. The reaction is found to proceed with the formation of ion-pair between benzenethiol and TEA. A suitable mechanism with the formation of an adduct between ion-pair and substrate in a slow step followed by its rearrangement to 1,2-addition product in a fast step has been proposed and corresponding rate law derived. From the rate law, the rate constants for the interaction between ion-pair and $\beta$NS have been evaluated. Interestingly, in both para-substituted substrates and benzenethiols the rate increases with the electron-withdrawing power of the substituents. The positive sign of $\rho_x$ in benzenethiols has been explained. The magnitude of cross-interaction constant, $\rho_{xy}$ is small (0.08). The magnitude of the Hammett $\rho_x$ values is higher than that of the Bronsted, $\beta_x$ values for benzenethiols. The kinetic isotope effect, $k_H/k_D$, is found to be greater than unity. A suitable transition state with simultaneous formation of $C_\beta$ -H and $B_\alpha$ -S bonds involving the ion-pair and $\beta$NS in a single concerted step has been proposed to account for these observations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11B
• /
• pp.1031-1037
• /
• 2003

A new scheduling scheme, which uses channel quality information of each flow in Bluetooth system of ad-hoc network for effective bandwidth assignment, has been proposed in this paper. By an effective bandwidth assignment, QoS (Quality of Service) could have been ensured in case of asymmetric data traffic, mixed data transmission, and congested data transmission in a specific channel. The scheduling algorithm determines channel weights using partial channel information of flows. Case studies conducted by NS-2 (Network Simulator 2) and Bluehoc simulator has been presented to show the effectiveness of the proposed scheduling scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.68-73
• /
• 2010

In this paper, a compact Ultra-Wideband band-pass filter with notched band at 5.8GHz by using LC resonator is proposed. The structure of the proposed band-pass filter is very simple, and the DGS(Defected Ground Structure) is used to get the low-pass filter characteristics and the LC resonator is used to get the notched filter. The proposed band-pass filter can be much smaller than a cascaded filter type. The LC resonator is designed with a radial stub and small stub. As a result of measurement, the insertion loss is less than 0.5dB throughout the pass-band of 2.21GHz~10.92GHz, the return loss is more than 16dB and the maximum variation of group delay is 0.29ns and a notched band is 5.2GHz~6.2GHz.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.2
• /
• pp.29-36
• /
• 2005

All-optical fiber-type $2{\times}32$ splitters for an Ethernet PON (passive optical network) were fabricated by using a FBT (fiber biconical tapered) process and the performance of the splitters was tested in upstream transmission of the EPON system. The $2{\times}32$ splitters was obtained by cascading $1{\times}4$ splitters fabricated by a conventional FBT process and showed -18 dB of insertion loss with 1.5 dB uniformity of output power at each channel and -0.1 dB of polarization dependent loss. The insertion loss variation was below 0.1 dB at the temperature range of $-40^{\circ}C\;to\;80^{\circ}C$. For upstream channel transmission test in the EPON system were a Zig board and a burst mode receiver. Zenko-made optical module was used for the burst mode receiver by adding functions of serializer/deserializer and clock data recovery, a Virtex II pro20 chipset and Vitesse VSC7123 were used in the Zig board for characterizing the burst mode and in the clock data recovery chipset, respectively. Startup acquisition lock time and data acquisition lock time were measured to be 670ns and 400ns, respectively, in the upstream channel transmission of the EPON system adapting the $2{\times}32$ splitter fabricated in this work.