• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.833-841
• /
• 2002

The present study examined the possibility of NOx reduction in the high temperature industrial furnaces, duct burner of gas turbine cogeneration and two-stage gas turbine combustor. The experimental study was carried out for the non-premixed flame of second stage combustor with the variations of oxygen concentration in the hot exhaust gas of first stage combustor. It also examined the flammability range, temperature and NOx, $CO_2$, $O_2$formation in the combustor with respect to oxygen concentration in which the fuel(natural gas) is supplying into the hot exhaust gas. The results show that the inner temperature of flame reaches 1,20$0^{\circ}C$ at EGR $O_2$23% and that 15ppm of NOx at EGR $O_2$15.5% increases up to 60ppm at EGR $O_2$23%. It is believed that Fenimore＇s prompt NOx mechanism is more influential on the NOx formation than Zeldovich＇s thermal NOx mechanism does.

• 한국응용과학기술학회지
• /
• 제37권4호
• /
• pp.723-732
• /
• 2020

RHDS 촉매는 코크와 황 화합물 그리고 금속인 바나듐이 표면에 침적되어 비활성화가 된다. 이러한 오염물을 제거하기 위해서 먼저 폐 RHDS 촉매에 묻어있는 중질유분의 세정, 코크와 황 화합물을 고온 배소 처리한 후, 과량으로 침적되어 있는 바나듐의 침출량을 조절하기 위하여 0.5, 1 wt% 옥살산 수용액을 이용하여 초음파 교반기에서 50 ℃, 10 sec 동안 교반하여 NOx 저감을 위한 SCR 촉매로의 적용 가능성을 확인하고자 하였다. 재생처리 한 RHDS 촉매의 성분은 XRF 를 사용하여 분석하였고, 상압 고정층 연속 흐름 반응기 상에서 NOx 저감 성능을 측정하였다. 옥살산 수용액 0.5 wt%, 10 sec 동안 초음파 침출한 촉매가 가장 안정적인 NOx 저감 성능을 보였으며, 375 ℃ 이상의 고온에서는 상용 촉매와 동등 수준의 NOx 저감 성능을 확인할 수 있었으나 저온영역 200 ℃에서 250 ℃까지는 상용 촉매보다 낮은 NOx 저감 성능을 보였다. 따라서 폐 RHDS 촉매를 재생처리 한 후 분말로 메탈 코로게이트 지지체에 워시코팅한 촉매는 상용 SCR 촉매로서 이용 가능함을 확인하였다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.179-189
• /
• 2008

The performance of Lean NOx Trap (LNT) based on the catalysts of Pt/K/Ba/$\gamma-Al_2O_3$ with proprietary washcoat formulation is studied using a bench flow reactor system. To investigate the effect of temperature and gas hourly space velocity (GHSV) on the nitrogen oxides (NOx) trapping capacity as well as NOx breakthrough time and final ratio of $NO_2$ to NO of LNT, series of adsorption isotherms are carried out with simulated exhaust gases of the lean burn engines. Since typical operation of LNT requires periodic regeneration with a short rich excursion, where the stored or trapped NOx is released and subsequently reduced to $N_2$, the effect of the duration of lean and rich phase and type of reductants on the NOx conversion is investigated. NOx storage capacity and breakthrough time obtained from adsorption isotherms shows a volcano-type dependence on the temperature with a maximum NOx storage capacity occurring $350^{\circ}C$ and with a maximum breakthrough time occurring $400^{\circ}C$ at all GHSVs investigated in this study. Also, maximum ratio of $NO_2$ to NO is obtained at $400^{\circ}C$ with a GHSV of $75,000\;hr^{-1}$ Lean/rich cycle of 100 s lean and 5 s rich used with a concentration of 1.33% of $H_2$ and 4% of CO in the rich phase is found to be optimum at operating temperature of $350^{\circ}C$ and a GHSV of $50,000\;hr^{-1}$.

• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.540-546
• /
• 2006

파일럿 크기의 흐름반응기에서 유기와 무기 첨가제가 질소산화물의 선택적 무촉매 환원반응에 미치는 영향을 공정변수 변화에 따라 고찰하였다. 질소산화물 저감효율은 반응기의 체류시간과 초기 NOx 농도 증가에 따라 증가하였다. 요소용액에 의한 NOx 환원반응은 $850^{\circ}C$에서 시작되어 $970^{\circ}C$에서는 최대값을 나타내었으며, NSR = 2.0까지 증가 하였다. 유기첨가제로서 에탄올과 페놀의 첨가는 온도창을 저온 영역으로 이동시켰으며, 에탄올 구조내의 탄화수소에 의한 부반응으로 최대의 NOx 저감효율이 감소하였다. NaOH 첨가는 NaOH의 연쇄반응과 $N_2O$ 저감으로 인하여 온도창을 확대시키고, 최대 NOx 저감효율을 10％ 정도 향상시켰다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.140-147
• /
• 2000

Using lobed burner, flame visualization and measurements of NOx and CO concentration in the combustor exit were carried out to evaluate the relation between the lobed structure in a burner and pollutant emission characteristics. The flame stability is enhanced by the lobed burner compared to conventional circular one. The correlation on fuel discharge velocity for flame blowout should be included on a variable related to the wall effect of the burner, because the flame blowout is observed at the burner having large perimeter. The burner having lobed structure in fuel discharge side compared to conventional burner reduces by 5% NOx emission due to lower flame intensity through flame elongation. Meanwhile the burner having lobed structure in air discharge side and both fuel and air discharge side increase the NOx emission.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.139-146
• /
• 2001

The experimental study was carried out for the diffusion flame characteristics of second stage combustor with the variations of temperature and supplying rate of hot exhaust gas from first stage combustor. It also examined the flame structure and NOx formation of the second stage combustor in which the fuel(natural gas) is supplying into the mixture of oxygen hot exhaust gas from first stage combustor. The results show that the increasement of temperature and flow rate of exhaust gas lead to increase the NOx up to 30ppm with 19% $O_2$ condition

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.102-105
• /
• 2001

Numerical simulations of coal combustion were carried out to identify what kind of burner design parameters are affecting the NOx emission. Where used burner design parameters are primary air velocity, secondary air velocity, $2^{nd}/3^{rd}$ air ratio, tertiary air velocity, and tertiary air injection location. Taguchi method was used to find the effective burner design parameters related to NOx formation. The results of numerical simulations showed that secondary air velocity and $2^{nd}/3^{rd}$ air ratio was the key parameters reducing the NOx emission. The total number of simulation cases was reduced by Taguchi method.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.19-26
• /
• 2013

The purpose of the study is carried out volume optimization of a combined system consisting of an LNT and SCR catalysts from the standpoint of its economic feasibility and de-NOx performance. Under the rich air-fuel ratio conditions for 5s (${\Phi}$=1.1), CO, $H_2$ and THC were generated at levels of 4%, 1.2% and $110ppmC_1$, respectively. The NOx conversion of the 1+1 combination was 5% lower than that of the 1.5+0.5 combination, however the reduced volume of the LNT catalyst decreased the total cost by about 6%. Therefore, the optimal volume ratio of the LNT and SCR catalysts was found to be the 1+1 catalyst combination, which has the highest total score in the terms of an economic feasibility and the NOx performance.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.82-87
• /
• 2001

The NOx emission characteristics of jet flames fueled with It was studied. Experimental and numerical investigations were carried out for various flames with varying equivalence ratio, fuel flow rate and nozzle diameter. The Emission indices of NOx(EINOx) were measured by chemiluminescent method and calculated by simulation using detailed chemistry. The results show that the numerical results represent well the trends of EINOx experimentally observed. EINOx of H$_2$ flame steeply increase at small equivalence ratio, gently increase and steady at more than equivalence ratio is 4.0. EINOx trends of H$_2$ flame can be describe in function of residence time in the high-temperature region weighted by the maximum flame temperature.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.24-30
• /
• 2010

In this study, numerical experiments were carried out to estimate the SCR De-NOx performance in DOC plus SCR systems. The SCR De-NOx phenomena are described by Langmuir-Hinshelwood reaction scheme. After validating the present approach by comparing the present results with the experimental results, such various parameters as space velocity, $H_2O$ concentration, $NO_2$/NOx ratio and relative volume of DOC are explored to increase the SCR De-NOx performance. The results indicate that SCR De-NOx performance largely depends on space velocity and $NO_2$/NOx ratio, especially below $200^{\circ}C$. SCR De-NOx performance is seriously affected by relative volume of DOC with SCR due to increasing in $NO_2$/NOx ratio at below $250^{\circ}C$.