• 제목/요약/키워드: NOx and CO

검색결과 794건 처리시간 0.039초

메탄/공기 층류 부분 예혼합화염의 화염구조와 NOx 배출특성;예혼합 인자의 영향 (Flame Structure and NOx Emission Characteristics in Laminar Partially Premixed $CH_4$/Air Flames;Effect of Premixing Degree)

  • 오정석;정용기;전충환;장영준
    • 한국연소학회:학술대회논문집
    • /
    • 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.75-81
    • /
    • 2003
  • In this paper, the study of effects of flow variables on flame structure and NOx emission concentration was performed in co-axial laminar partially premixed methane/air flames. the objectives are to reveal its effect as parameters were varied and to understand the correlation between flame structure and NOx emission characteristics in the reaction zone. equivalence ratio(${\Phi}$), fuel split degree(${\sigma}$), and mixing distance(x/D) were defined as a premixing degree and varied within $1.36{\sim}3.17$(equivalence ratio), $50{\sim}100$(fuel split degree), and $5{\sim}20$(mixing distance). the image of $OH{\ast}$ and $CH{\ast}$, and NOx concentration were obtained with an ICCD camera and a NOx analyzer. additionally the maximum intensity location of $OH{\ast}$ chemiluminescence and $CH{\ast}$ chemiluminescence were measured to compare each flame structures. In conclusion flame structure and NOx emission characteristics were changed from diffused to premixed flame when mixing degree was on the increase. the main effect on flame structure and NOx production was at first equivalence ratio(${\Phi}$), and next fuel split degree(${\sigma}$), and finally mixing distance(x/D).

  • PDF

습식 스크러버를 이용한 NOx 제거에 관한 연구 (The Simultaneous removal of NOx using Wet Scrubber)

  • 김재강;이주열;박병현;최진식
    • 한국응용과학기술학회지
    • /
    • 제32권2호
    • /
    • pp.296-301
    • /
    • 2015
  • The experiment was performed for in order to remove NOx which is generated in the Ship's engine. it was performed test in order to remove NOx which is generated in the Ship's engine. It was used as the oxidizing agent sodium chlorite. Use the oxidizer is nitrogen monoxide was oxidized to nitrogen dioxide. and was tested pH adjustment to increase the efficiency of oxidizing. An aqueous solution of sodium hydroxide was used for the nitrogen dioxide absorbent. Low concentration of the solution, it showed a high efficiency. improves the absorption efficiency by add additives.

고형연료제품 사용시설에서의 SNCR의 운전조건에 따른 NOx 배출특성 (NOx Emission Characteristics with Operating Conditions of SNCR in SRF Usage Facilities)

  • 서제우;김영희
    • 청정기술
    • /
    • 제27권4호
    • /
    • pp.350-358
    • /
    • 2021
  • 본 연구결과에서 연소로 내 온도가 848.27 ~ 1,026.80 ℃ 범위로써 평균 976.61 ℃으로 나타났으며, 온도증가에 따라 NOx 농도는 증가하는 경향으로 나타났다. 요소 사용량은 291.00 ~ 693.00 kg d-1로 평균 542.34 kg d-1로 나타났으며, 요소 사용량의 증가에 따라 NOx 농도는 감소하는 경향으로 나타났다. 체류시간이 3.38 ~ 9.17 s로 평균 약 5.22 s로써 설계시 고려한 2 s이내 보다 약 2.61 배 크게 나타났다. 이는 SRF 투입량 허가조건인 1,950 kg h-1 대비 평균 SRF 투입량이 약 55.71%인 1,086 kg h-1로써 연소실 면적은 일정하나 SRF 연소량의 감소에 따라 배가스량 감소에 따른 체류시간이 증가하는 것으로 판단된다. O2/CO 비는 847.05 ~ 14,877.34로 평균 3,111.30으로 나타났고, O2/CO 비 증가에 따라 NOx 농도는 다소 증가하는 경향으로 나타났다. 온도증가와 O2/CO 비의 증가에 공기 중 질소 성분과의 연소반응이 증가하여 NOx 농도가 다소 증가하였으며, 요소 투입량 증가와 체류시간이 증가할수록 배가스의 NOx와의 반응량이 증가하여 처리 후의 NOx 농도는 다소 감소하는 경향으로 나타났다. TMS 자료에 의한 굴뚝 출구에서의 NOx 농도는 7.88 ~ 34.02 ppm으로 평균 19.92 ppm으로써 배출허용기준 60 ppm 이내로 배출되었다. NOx 배출계수는 1.058 ~ 1.795 kg ton-1으로써 평균 1.450 kg ton-1으로 나타났다. 본 연구결과 NOx 배출계수는 기타 고체연료인 최대 배출계수 5.830 kg ton-1 약 24.87%로 나타났으며, 기타 합성수지류와 기타 사업장폐기물의 배출계수인 1.817 kg ton-1, 3.322 kg ton-1 대비 각각 79.80%, 43.65%로 나타났다. 기 유사 연구결과인 NIER 고시(2005-9)의 RDF 배출계수인 1.400 kg ton-1과 유사하게 나타났으며, 최대로 나타난 SRF의 경우인 배출계수 13.210 kg ton-1에 비해 약 10.98%로 나타났다. 따라서 NOx의 배출계수는 편차가 크게 나타났다.

연소온도 조건에 따른 FRP 및 시트커버 내장재의 연소가스 발생량 비교 (Comparison of combustion gas release for FRP and seat cover materials to the Furnace temperature)

  • 이덕희;정우성;이철규;유문천
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1527-1532
    • /
    • 2007
  • We have evaluated the toxicity of interior materials for the railway passenger car by checking the release of $CO_2$, CO, NOx, SO2, HCl, HF, HBr, HCN. The NOx is one of the most effective for the determination of Toxic Index R value. It is generally known that the mechanism of thermal NOx generation without the Interior Material nitrogen source. This study started from the idea to check the NOx difference according to the furnace temperature. But from the results, it was revealed that NOx is not so sensitive for the furnace temperature in case of solid burning. Other gases such as HCN, CO were more changeable to the furnace Temp. We reported the test result as for toxicity index r(x).

  • PDF

매립가스 마이크로가스터빈 배가스 분석에 관한 실험적 연구 (Experimental Study of the Landfill Gas Fuelled Micro Gas Turbine Exhaust Gas Analysis)

  • 박정극;허광범;임상규;오일홍;이인화
    • 신재생에너지
    • /
    • 제7권3호
    • /
    • pp.67-73
    • /
    • 2011
  • MGT fuelled by landfill gas was tested to asses feasibility of its exhaust gas application for $CO_2$ enrichment. The exhaust gas was analyzed during start-up and normal operation with different MGT load conditions. Due to the changes of air/fuel ratio and combustion mode, $O_2$, $CO_2$, CO and NOx concentration were varied within wide ranges during the MGT start-up. Especially, NOx emissioin level was increased up to 20.01 ppmv. Different tendencies of $O_2$, $CO_2$, CO and NOx concentrations were observed with MGT output changes. $O_2$ and CO concentrations were shown to be decreased and NOx and $CO_2$ concentrations were shown to have opposite trends. NOx emission level (0.8~1.88 ppmv) was very low compared to other types of combustion based power generation equipment. Unburned hydrocarbon emission level was substantially decreased with MGT load increase. Especially, $C_2H_4$ concentration was below the detection limit(0.2 ppmv) around the nominal load condition. The exhaust gas from landfill gas fuelled MGT system was shown to be feasible for $CO_2$ fertilization. Concentrations of major components were within or below the maximum allowable ranges.

1,2-Dichlorobenzene 및 질소산화물 동시제거를 위한 촉매연구 (A Study on Catalysts for Simultaneous Removal of 1,2-Dichlorobenzene and NOx)

  • 박광희;홍성창
    • 공업화학
    • /
    • 제20권5호
    • /
    • pp.522-526
    • /
    • 2009
  • 다양한 금속(Ru, Mn, Co, Fe)을 $Al_2O_3$$CeO_2$에 담지한 촉매를 이용하여 1,2-Dichlorobenzen (1,2-DCB) 제거를 위한 촉매산화 실험을 실시하였다. 이와 더불어 동시에 NOx 제거가 이루어져 단일 촉매층에서 산화/환원 이원 기능이 가능한 촉매를 연구하고자 하였다. 실험결과 1,2-DCB 산화제거효율은 Ru/Co/$Al_2O_3$, Mn-Fe/$CeO_{2}$, 상용촉매인 Cr/$Al_2O_3$ 순으로 나타났다. 또한 1,2-DCB 산화제거효율이 가장 우수하였던 Ru/Co/$Al_2O_3$는 Chlorobenzene (CB)의 분해실험에서도 VOC 제거에 있어서 잘 알려진 Pt-Pd/$Al_2O_3$ 보다 우수한 활성을 나타내었다. 또한 $Cl_2$와 같은 생성물에 의하여 활성의 저하 및 황에 대한 내피독성과 내구성에서 우수한 결과를 얻을 수 있었다. NOx 제거에 있어서도 $260^{\circ}C$에서 NOx 전환율이 70% 정도로 나타났다.

15MW급 부분예혼합 초저 NOx 가스연소기에 관한 실험적 연구 (Experimental Study on 15MW partially premixed Low NOx burner)

  • 권민준;신명철;김세원;이창엽
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.123-125
    • /
    • 2012
  • In this study, combustion characteristics for 20t/h water tube boilers are studied. The burner by applying The fuel staging technology, the air staging technology, the partially premixed technology, the separated flame technology and the flame inner recirculation technology was designed. This study was to determine the combustion characteristics for the three types of burners. It is found that the result of flame temperature measurement is less than $1300^{\circ}C$ at the all flame region. also, emissions of NOx and CO are found to be 15.8 ppm and 18.9 ppm, respectively.

  • PDF

실시간교통정보 이용에 따른 차량의 CO, VOC, NOx 저감효과 평가 (Evaluating Vehicle Emission Reduction (CO, VOC and NOx) Using Real-time Traffic Information)

  • 김준형;엄정섭
    • 환경영향평가
    • /
    • 제20권2호
    • /
    • pp.217-226
    • /
    • 2011
  • This paper was inspired by the fact that Real-time Traffic Information Service could play a key role in reducing incomplete combustion time remarkably since it can provide traffic jam information in real-time basis. Emission characteristics of experimental engines were studied with variable travel distances and speed of car in terms of traffic information provided. 12 Km distance road of Susung district in Daegu is taken as an experimental area to examine this new approach. The emission was tested while the driving was done at 8 AM, 3 PM, 6 PM which represents various traffic conditions. The reduced emission has been measured for a travel distance running at different loads (conventional shortest route and Real-time Traffic Information) and various loads (CO, VOC and NOx) are all inventoried and calculated in terms of existing emission factors. The emission has been shown to reduce linearly with travel distance : carbon monoxide (20.56%), VOC (29.21%), NOx(8.86%).